Consideration of aging mechanism influence on transport safety of dual purpose casks for spent nuclear fuel or HLW

References

• Droste B and Wille F: ‘Maintenance of package design safety report effectiveness of SNF/HLW dual purpose casks’, Proc. 17th Int. Symp. on ‘Packaging and transportation of radioactive materials (PATRAM 2013)’, San Francisco, CA, USA, August 2013, INNM, p. 153.
   Google Scholar
• Völzke H, Wolff D, Probst U, Nagelschmidt S and Schulz S: ‘Long-term performance of metal seals for transport and storage casks’, Packag. Transp. Storage Secur. Radioactive Mater., 2014, 25, 8–15.
   Google Scholar
• IAEA Safety Standards: ‘Regulations for the safe transport of radioactive material’, 2012 edn., Specific safety requirements no. SSR-6, IAEA, Vienna, Austria, 2012.
   Google Scholar
• Völzke H, Qiao L, Zencker U, Wolff D, Feutlinske K and Musolff A: ‘Topical BAM cask design evaluation using drop tests and numerical calculations: accidental cask drop without impact limiters onto storage building foundation’, Packag. Transp. Storage Secur. Radioactive Mater., 2008, 19, 129–134.
   Google Scholar
• Wieser G, Qiao L, Völzke H, Wolff D and Droste B: ‘Safety analysis of casks under extreme impact conditions’, RAMTRANS, 2004, 15, 141–147.
   Google Scholar
• ‘Preparation of a safety case for a dual purpose cask containing spent fuel’, IAEA, Vienna, Austria, 2014 (current draft: http://www-ns.iaea.org/downloads/rw/waste-safety/disp/dual-purpose-spent-fuel-cask-draft-tecdoc-2014.pdf).
   Google Scholar
• Nitsche F, Börst F.-M and Reiche I: ‘The German regulatory concept of transport of package design approval for dual purpose casks during interim storage’, Packag. Transp. Storage Secur. Radioactive Mater., 2013, 24, 172–175.
   Google Scholar
• Schubert S, Wille F, Ballheimer V and Droste B: ‘Assessment feedback on material compatibility and determination of material parameters for transport packages used as dual purpose SNF and HLW casks’, Proc. 17th Int. Symp. on ‘Packaging and transportation of radioactive materials (PATRAM 2013)’, San Francisco, CA, USA, August 2013, INNM, p. 154.
   Google Scholar
• Wolff D, Probst U, Völzke H, Droste B and Rödel R: ‘Safety aspects of long-term dry storage of Type-B spent fuel and HLW transport casks’, RAMTRANS, 2004, 15, 207–213.
   Google Scholar
• Droste B, Hübner H and Probst U:’ Selection and certification of materials for casks intended for the transport and intermediate storage of spent fuel’, Proc. 7th Int. Symp. on ‘Packaging and transportation of radioactive materials (PATRAM ’83)’, New Orleans, IL, USA, May 1983, ORNL, 1048–1054.
   Google Scholar
• BAM Fachgruppe 9·3, Versuchsbericht 1·6-3/92, Untersuchung der Korrosion von Dichtungskomponenten an CASTOR-Brennelement-Zwischenlagerbehältern bei Einwirkung von Cäsium, BAM, Berlin, 03·09·1992 (non-published test report).
   Google Scholar
• Linnemann K, Ballheimer V, Sterthaus J and Wille F: ‘Methodological aspects for numerical analysis of lid systems for SNF and HLW transport packages’, Proc. ASME Pressure Piping Division Conf. PVP2014, Anaheim, CA, USA, July 2014, ASME, Paper PVP2014-29304.
   Google Scholar
• Sterthaus J, Bletzer C, Ballheimer V, Linnemann K, Nehrig M and Wille F: ‘Numerical approach for containment assessment of transport packages under regulatory thermal test conditions’, Proc. ASME Pressure Piping Division Conf. PVP2014, Anaheim, CA, USA, July 2014, ASME, Paper PVP2014-28199.
   Google Scholar
• Rolle A, Winkler H.-P, Probst U, Ballheimer V and Neumeyer T: ‘Verification of design leakage rate for activity release calculation’, Proc. 17th Int. Symp. on ‘Packaging and transportation of radioactive materials (PATRAM 2013)’, San Francisco, CA, USA, August 2013, INNM, p. 125.
   Google Scholar
• Schubert S, Koch F, Probst U and Winkler H.-P: ‘Behaviour of metallic seals in CASTORR casks under normal and accident conditions of transport: qualification requirements’, Packag. Transp. Storage Secur. Radioactive Mater., 2009, 20, 179–182. Symp. on ‘Packaging and transportation of radioactive materials (PATRAM 2010)’, London, UK, October 2010, WNTI.
   Google Scholar
• Yokoyama T, Kawakami H, Uchiyama N, Yasuda M and Matsuoka S: ‘Assessment of integrity of a dual-purpose metal cask after long-term interim storage: seal performance under transport conditions’, RAMTRANS, 2005, 16, (3), 189–197.
   Google Scholar
• Neumann M, Wille F, Linnemann K, Schubert S, Ballheimer V, Sterthaus J and Droste B: ‘Reflection on BAM mechanical design assessment of the TNR24E spent fuel transport package’, Proc. 17th Int. Symp. on ‘Packaging and transportation of radioactive materials (PATRAM 2013), San Francisco, CA, USA, August 2013, INNM, p. 257.
   Google Scholar
• Einziger RE: ‘An aging management plan for spent fuel dry storage and transportation’, 38–45; 2013, Radwaste Solutions.
   Google Scholar
• Ballheimer V, Wille F and Droste B: ‘Mechanical safety analysis for high burn-up spent fuel assemblies under accident conditions of transport’, PTSSRM, 2010, American Nuclear Society, USA, 21, 203–207.
   Google Scholar
• von der Ehe K, Jaunich M, Wolff D, Boehning M and Goering H: ‘Radiation induced structural changes of (U)HMW Polyethylene with regard to its application for radiation shielding’, Proc. 16th Int. Symp. on ‘Packaging and transportation of radioactive materials (PATRAM 2010)’, London, UK, October 2010, WNTI.
   Google Scholar
• Nizeyimana F, Bellenger V, Abadie P and Issard H: ‘Thermal aging of Vinylester neutron shielding used in transport/storage casks’, Proc. 16th Int. Symp. on ‘Packaging and transportation of radioactive materials (PATRAM 2010)’, London, UK, October 2010, WNTI.
   Google Scholar
• Komann S, Wille F and Droste B: ‘Gap analysis examples from periodical reviews of transport package design safety reports of SNF/HLW dual purpose casks’, Proc. 12th Probabilistic Safety Assessment and Management (PSAM12) Conf., Honolulu, HI, USA, June 2014, Paper no. 259.
   Google Scholar