References
- Allinson, D.; Hall, M. 2010. Hygrothermal analysis of a stabilised rammed earth test building in the UK, Energy and Buildings 42(6): 845–852. https://doi.org/10.1016/j.enbuild.2009.12.005
- BCC Research. 2015. North American market for commercial roofing materials to be worth $5.9 billion in 2014 [online], [cited 25 January 2015]. Available from Internet: http://www.bccresearch.com/pressroom/avm/north-american-market-commercial-roofing-materials-worth-$5.9-billion-2014
- Canadian Institute of Steel Constructions (CISC). 2014. Handbook of steel construction. 10th ed. Toronto. 2010.
- Canadian Standards Association (CSA). 1978. CAN3-S16.1M78 Steel structures for buildings. Limit States Design, Toronto, Canada.
- Canadian Standards Association (CSA). 2009. S16–09 Design of steel structures. Toronto, Canada.
- Carll, C.; TenWolde, A.; Munson, R. 2007. Moisture performance of a contemporary wood-frame house operated at design indoor humidity levels [online], [cited 10 June 2013]. Available from Internet: http://www.ornl.gov/sci/buildings/2012/Session%20PDFs/72_New.pdf
- Choi, S.; Oh, S.; Seo, C. 2012. Construction of an evaluation system for selecting an appropriate waterproofing method for the roof of a building, Canadian Journal of Civil Engineering 39(12): 1264–1273. https://doi.org/10.1139/l2012–070 doi: 10.1139/l2012-070
- Costello, M. 2011. Single ply roofing: introduction to a new sustainability standard for the roofing industry, Journal of ASTM International 8(9): 1–6. https://doi.org/10.1520/JAI103741
- Deierlein, G. G.; Reinhorn, A. M.; Willford, M. R. 2010. Nonlinear structural analysis for seismic design, NEHRP Seismic Design Technical Brief No. 4., NIST GCR 10-917-5. Gaithersburg, MD: National Institute of Standards and Technology.
- Dong, B.; Kennedy, C.; Pressnail, K. 2005. Comparing life cycle implications of building retrofit and replacement options, Canadian Journal of Civil Engineering 32: 1051–1063. https://doi.org/10.1139/l05-061
- Fraunhofer Institute [online]. 2015 [cited 29 January 2015]. Available from Internet: http://www.wufi.de/index_e.html
- Hannu, A.; Viitanen, H. A. 1997. Modelling the time factor in the development of mould fungi – the effect of critical humidity and temperature conditions on pine and spruce sapwood, Holzforschung 51: 6–14. https://doi.org/10.1515/hfsg.1997.51.1.6
- Hukka, A.; Viitanen, H. A. 1999. A mathematical model of mould growth on wooden material, Wood Science and Technology 33(6): 475–485. https://doi.org/10.1007/s002260050131
- Irwin, P. A.; Gamble, S. L.; Taylor, D. A. 1995. Effects of roof size, heat transfer, and climate on snow loads: studies for the 1995 NBC, Canadian Journal of Civil Engineering 22(4): 770–784. https://doi.org/10.1139/l95-087
- Johansson, P.; Ekstrand-Tobin, A.; Svensson, T.; Bok, G. 2012. Laboratory study to determine the critical moisture level for mould growth on building materials, International Biodeterioration and Biodegradation 73: 23–32. https://doi.org/10.1016/j.ibiod.2012.05.014
- Kennedy, T. H. R.; Kennedy, D. J. L.; MacGregor, J. G.; Taylor, D. A. 1985. Snow loads in the 1985 National building code of Canada: curved, Canadian Journal of Civil Engineering 12(3): 427–438. https://doi.org/10.1139/l85-051
- Lounis, Z.; Lacasse, M.; Vanier, D.; Kyle, B. 1998. Towards standardization of service life prediction of roofing membranes, in Research and Standards Development, 4th Vol., ASTM STP 1349, American Society for Testing and Materials.
- Lounis, Z.; Vanier, D. J. 2000. Better performing dryable insulation system for low-slope roofs, Computer-Aided Civil and Infrastructure Engineering 15: 320–329. https://doi.org/10.1111/0885-9507.00196
- Marques, J. A.; Lopes, J. G.; Correia, J. R. 2011. Durability of the adhesion between bituminous coatings and self-protection mineral granules of waterproofing membranes, Construction and Building Materials 25(2011): 138–144. https://doi.org/10.1016/j.conbuildmat.2010.06.047
- National Research Council of Canada (NRC). 1980. National Building Code for Canada 1980. Ottawa.
- National Research Council of Canada (NRC). 2010. National Building Code for Canada 2010. Ottawa.
- Powell, G. H. 2010. Modeling for structural analysis: behavior and basics. 1st ed. Berkeley, CA: Computers and Structures, Inc.
- Rudbeck, D. 2001. Better performing dryable insulation system for low-slope roofs, Journal of Building Physics 24(3): 226–239. https://doi.org/10.1106/XKTX-TACU-TEPN-NA79
- Stathopoulos, T.; Luchian, H. D. 1990. Wind pressures on buildings with stepped roofs, Canadian Journal of Civil Engineering 17(4): 569–577. https://doi.org/10.1139/l90-065
- Steel Deck Institute (SDI) [online]. 2015 [cited 22 January 2015]. Available from Internet: http://www.sdi.org/
- Sun, C. 2013. Structural analysis of a re-roofing system: Master’s Thesis. University of Toronto, Department of Civil Engineering, Toronto, Canada.
- Taylor, D. 1992. Snow on two-level flat roofs – measured vs. 1990 NBC load, Canadian Journal of Civil Engineering 19(1): 59–67. https://doi.org/10.1139/l92-006
- Wallace, T.; Rossiter, W. (Ed.). 1998. Roofing research and standards development. 4th Vol. ASTM, Baltimore, May 1999.
- Xing, L.; Taylor, T. 2011. Correlating accelerated laboratory, field, and thermal aging TPO membranes, Journal of ASTM International 8(8): 1–14. https://doi.org/10.1520/JAI103743