20
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Investigations on a Spark Ignition Engine, Part I: Fuelled With Biogas Extracted From Sewage

ORCID Icon & ORCID Icon

References

  • E. Porpatham, A. Ramesh and B. Nagalingam, “Effect of swirl on the performance and combustion of a biogas fuelled spark ignition engine,” Energy Convers. Manage., vol. 76, pp. 463–471, Dec. 2013. DOI: 10.1016/j.enconman.2013.07.071.
  • P. G. Tewari, J. P. Subrahmanyam and M. K. G. Babu, “Experimental investigations on the performance characteristics of a producer gas fuelled spark ignition engine,” SAE Tech. Paper, vol. 1, no. 12, pp. 1651–1659, Mar. 2001. DOI: 10.4271/2001-01-1189.
  • G. Sridhar, P. J. Paul and H. S. Mukanda, “Biomass derived producer gas as a reciprocating engine fuel-an experiment analysis,” Biomass Bioenergy, vol. 21, no. 1, pp. 61–72, Jul. 2001. DOI: 10.1016/S0961-9534(01)00014-9.
  • A. Henham and M. K. Makkar, “Combustion of simulated biogas in a dual-fuel diesel engine,” Energy Convers. Manage., vol. 39, no. 16-18, pp. 2001–2009, Nov–Dec.1998. DOI: 10.1016/S0196-8904(98)00071-5.
  • J. N. Reddy and A. Ramesh, “Parametric studies for improving the performance of a Jatropha oil-fuelled compression ignition engine,” Renew Energy, vol. 31, no. 12, pp. 1994–2016, Oct. 2006. DOI: 10.1016/J.renene.2005.10.006.
  • D. Barik and S. Murugan, “Investigation on combustion performance and emission characteristics of a DI (direct injection) diesel engine fuelled with biogas-diesel in dual fuel mode,” Energy, vol. 72, pp. 760–771, Aug. 2014. DOI: 10.1016/j.energy.2014.05.106.
  • J. Huang and R. J. Crookes, “Assessment of simulated biogas as a fuel for the spark ignition engine,” Fuel, vol. 77, no. 15, pp. 1793–1801, Dec. 1998. DOI: 10.1016/S0016-2361(98)00114-8.
  • E. Porpatham, A. Ramesh and B. Nagalingam, “Effect of compression ratio on the performance and combustion of a biogas fuelled spark ignition engine,” Fuel, vol. 95, pp. 247–256, May 2012. DOI: 10.1016/j.fuel.2011.10.059.
  • E. Porpatham, A. Ramesh and B. Nagalingam, “Investigation on the effect of concentration of methane in biogas when used as a fuel for a spark ignition engine,” Fuel, vol. 87, no. 8–9, pp. 1651–1659, 2008. Jul DOI: 10.1016/j.fuel.2007.08.014.
  • E.-C. Kwon, K. Song, M. Kim, Y. Shin and S. Choi, “Performance of small spark ignition engine fuelled with biogas at different compression ratio and various carbon dioxide dilution,” Fuel, vol. 196, pp. 217–224, May 2017. DOI: 10.1016/j.fuel.2017.01.105.
  • R. Chandra, V. K. Vijay, P. M. V. Subbarao and T. K. Khura, “Performance evaluation of a constant speed IC engine on CNG, methane enriched biogas and biogas,” App. Energy, vol. 88, no. 11, pp. 3969–3977, Nov. 2011. DOI: 10.1016/j.apenergy.2011.04.032.
  • C. Lim, et al., “Performance and emission characteristics of a vehicle fuelled with enriched biogas and natural gases,” Appl. Energy, vol. 139, pp. 17–29, Feb. 2015. DOI: 10.1016/j.apenergy.2014.10.084.
  • N. C. Macari and R. D. Richardson, “Operation of a caterpillar 3516 spark-ignited engine on low-btu fuel,” Trans. ASME J. Eng. Gas Turbines Power, vol. 109, no. 4, pp. 443–447, Oct. 1987. DOI: 10.1115/1.3240061.
  • G. P. Mueller, “Landfill gas application development of the caterpillar G3600 spark-ignited gas engine,” Trans. ASME J. Eng. Gas Turbines Power, vol. 117, no. 4, pp. 820–825, Oct. 1995. DOI: 10.1115/1.2815470.
  • R. J. Crookes, “Comparative bio-fuel performance in internal combustion engines,” Biomass Bioenergy, vol. 30, no. 5, pp. 461–468, May 2006. DOI: 10.1016/j.biombioe.2005.11.022.
  • A. J. Torregrosa, P. Olmeda, J. Martın and C. Romero, “A tool for predicting the thermal performance of a diesel engine,” Heat Transf. Eng., vol. 32, no. 10, pp. 891–904, 2011. DOI: 10.1080/01457632.2011.548639.
  • G. Shu, L. Shi, H. Tian and L. Chang, “Comparison and selection research of CO2-based transcritical Rankine cycle using for gasoline and diesel engine’s waste heat recovery,” Heat Transf. Eng., vol. 39, no. 7–8, pp. 672–686, 2018. DOI: 10.1080/01457632.2017.1325678.
  • H. Fridriksson, B. Sunden, M. Tuner and O. Andersson, “Heat transfer in diesel and partially premixed combustion engines; a computational fluid dynamics study,” Heat Transf. Eng., vol. 38, no. 17, pp. 1481–1495, 2017. DOI: 10.1080/01457632.2016.1255086.
  • S. W. Chang, L. M. Su, T. L. Yang and S. F. Chiou, “Enhanced heat transfer of shaker-bored piston cooling channel with twisted tape insert,” Heat Transf. Eng., vol. 28, no. 4, pp. 321–334, 2007. DOI: 10.1080/01457630601122740.
  • E. Porpatham, A. Ramesh and B. Nagalingam, “Effect of hydrogen addition on the performance of a biogas fuelled spark ignition engine,” Int. J. Hydrogen Energy, vol. 32, no. 12, pp. 2057–2065, Aug. 2007. DOI: 10.1016/j.ijhydene.2006.09.001.
  • C. Jeong, T. Kim, K. Lee, S. Song and K. M. Chun, “Generating efficiency and emissions of a spark-ignition gas engine generator fuelled with bio-gas-hydrogen blends,” Int. J. Hydrogen Energy, vol. 34, no. 23, pp. 9620–9627, Dec. 2009. DOI: 10.1016/j.ijhydene.2009.09.099.
  • C. D. Rakopoulos and C. N. Michos, “Generation of combustion irreversibilities in a spark ignition engine under biogas-hydrogen mixtures fueling,” Int. J. Hydrogen Energy, vol. 34, no. 10, pp. 4422–4437, May 2009. DOI: 10.1016/j.ijhydene.2009.02.087.
  • S. Shashikantha and P. P. Parikh, “Spark ignition producer gas engine and dedicated compressed natural gas engine-technology development and experimental performance optimization,” SAE Tech. Paper, vol. 1, pp. 30, Oct. 1999. DOI: 10.4271/1999-01-3515.
  • R. Abader, “A study on biogas-fuelled SI engines: Effects of fuel composition on emissions and catalyst performance,” Master’s thesis, Mechanical and Industrial Engineering, University of Toronto, 2014. https://hdl.handle.net/1807/44001.
  • Shashikantha, W. Klose, and P. P., Parikh, “Development of a 15 kWe spark ignition producer gas engine and some investigations of its in-cylinder processes.” Renewable Energy, vol. 5, no. 5–8, pp. 835–837, Aug. 1994. DOI: 10.1016/0960-1481(94)90100-7.
  • M. S. Babu, S. Clement and N. K. S. Rajan, “Effect of Combustible Fractions of a Sustainable Producer Gas Fuel on Spark Ignition Engine Combustion, Performance and Emissions-An Experimental Analysis,” Heat Transf. Eng., vol. 44, no. 7, pp. 638–649, 2023. DOI: 10.1080/01457632.2022.2079049.
  • C. D. Rakopoulos and C. N. Michos, “Development and validation of a multi-zone combustion model for performance and nitric oxide formation in syngas fuelled spark ignition engine,” Energy Convers. Manage., vol. 49, no. 10, pp. 2924–2938, Oct. 2008. DOI: 10.1016/j.enconman.2008.02.011.
  • B. Gamiño and J. Aguillón, “Numerical simulation of syngas combustion with a multi-spark ignition system in a diesel engine adapted to work at the Otto cycle,” Fuel, vol. 89, no. 3, pp. 581–591, Mar. 2010. DOI: 10.1016/j.fuel.2009.06.030.
  • A. Shah, R. Srinivasan, S. D. F. To and E. P. Columbus, “Performance, and emissions of a spark-ignited engine driven generator on biomass-based syngas,” Bioresour. Technol., vol. 101, no. 12, pp. 4656–4661, Jun. 2010. DOI: 10.1016/J.biortech.2010.01.049.
  • M. B. Young, “Cyclic dispersion in the homogeneous charge spark ignition engine, a literature survey,” SAE Tech. Paper, vol. 1, pp. 18, 1981. DOI: 10.4271/810020.
  • B. P. Pundir, V. A. Zvonow and C. P. Gupta, “Effect of charge non-homogeneity on cycle-by-cycle variations in S.I. engines”, SAE Tech. Paper, vol. 1, pp. 16, 1981. DOI: 10.4271/810774.
  • F. A. Matecunas, “Modes and measures of combustion variability,” SAE Tech. Paper, vol. 1, pp. 20, Feb. 1983. DOI: 10.4271/830337.
  • S. J. Kline and F. A. McClintock, “Describing uncertainties in single-sample experiments,” Mech. Eng., vol. 75, no. 1, pp. 3–8, 1953.
  • K. Ishii, T. Sasaki, Y. Urata, K. Yoshida and T. Ohno, “Investigation of cyclic variability of IMEP under lean burn operation in spark ignition engines,” SAE Tech. Paper, vol. 1, pp. 12, 1997. DOI: 10.4271/972830.
  • J. B. Heywood, Internal Combustion Engines Fundamentals. New York, NY: McGraw-Hill, 1998.
  • T. K. Hayes, L. D. Savage and S. C. Sorenson, “Cylinder pressure data acquisition and heat release analysis on a personal computer,” SAE Tech. Paper, vol. 1, pp. 12, 1986. DOI: 10.4271/860029.
  • J. A. Gatowski, E. N. Balles, K. M. Chun, F. E. Nelson, J. A. Ekchian and J. B. Heywood, “Heat release analysis of engine pressure data,” SAE Tech. Paper, vol. 1, pp. 20, 1984. DOI: 10.4271/841359.
  • G. F. Hohenberg, “Advanced Approaches for Heat Transfer Calculations,” SAE Tech. Paper, vol. 1, pp. 19, 1979. DOI: 10.4271/790825.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.