Design and Experiment Verification to Combined Dynamic Seal of Wide-Speed Hydraulic Motor Pump

References

• Archard, J. F. (1953), “Contact and Rubbing of Flat Surfaces,” Journal of Applied Physics, 24, pp 981–988. doi:10.1063/1.1721448
   Web of Science ®Google Scholar
• Lee, R. S., and Jou, J. L. (2003), “Application of Numerical Simulation for Wear Analysis of Warm Forging Die,” Journal of Materials Processing Technology, 140, pp 43–48. doi:10.1016/S0924-0136(03)00723-4
   Web of Science ®Google Scholar
• Feyzullahoğlu, E. (2015), “Abrasive Wear, Thermal and Viscoelastic Behaviors of Rubber Seal Materials Used in Different Working Conditions,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 229, pp 64–73. doi:10.1177/1350650114541750
   Web of Science ®Google Scholar
• Jagger, E. T. (1957), “Rotary Shaft Seals: The Sealing Mechanism of Synthetic Rubber Seals Running at Atmospheric Pressure,” Proceedings of the Institution of Mechanical Engineers, 171, pp 597–616. doi:10.1243/PIME_PROC_1957_171_050_02
   Google Scholar
• Kuzma, D. C. (1969), “Theory of the Mechanism of Sealing with Application to Face Seals,” Journal of Lubrication Technology, 91, pp 704–712. doi:10.1115/1.3555028
   Web of Science ®Google Scholar
• Gorriño, A., Angulo, C., and Canales, J. (2007), “Theoretical Analysis of the Pumping Effect of Rotary Hydrodynamic Seals with Elastomeric Lips,” Tribology International, 40, pp 896–905. doi:10.1016/j.triboint.2006.09.009
   Web of Science ®Google Scholar
• Paige, J., and Stephens, L. S. (2004), “Surface Characterization and Experimental Design for Testing of a Radial Lip Seal,” Tribology Transactions, 47, pp 341–355. doi:10.1080/05698190490455339
   Web of Science ®Google Scholar
• Zhang, F. Y., Chen, J. L., Li, T. T., and Zhang, Y. F. (2019), “Study and Optimization of Structural Parameters of Oil Seal by Response Surface Method,” International Journal of Precision Engineering and Manufacturing, 20, pp 255–265. doi:10.1007/s12541-019-00067-3
   Web of Science ®Google Scholar
• Grün, J., Feldmeth, S., and Bauer, F. (2021), “Wear on Radial Lip Seals: A Numerical Study of the Influence on the Sealing Mechanism,” Wear, 476, 203674. doi:10.1016/j.wear.2021.203674
   Web of Science ®Google Scholar
• Salant, R. F., and Rocke, A. H. (2004), “Hydrodynamic Analysis of the Flow in a Rotary Lip Seal Using Flow Factors,” Journal of Tribology, 126, pp 156–161. doi:10.1115/1.1609486
   Web of Science ®Google Scholar
• Mofidi, M., and Prakash, B. (2008), “Influence of Counterface Topography on Sliding Friction and Wear of Some Elastomers under Dry Sliding Conditions,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 222, pp 667–673. doi:10.1243/13506501JET392
   Web of Science ®Google Scholar
• Salant, R. F. (2012), “Problems and Prospects for the Simulation of Dynamic Elastomeric Seal Wear and Life,” 17th International Sealing Conference, I, pp 39–52.
   Google Scholar
• El Gadari, M., Fatu, A., and Hajjam, M. (2015), “Shaft Roughness Effect on Elasto-Hydrodynamic Lubrication of Rotary Lip Seals: Experimentation and Numerical Simulation,” Tribology International, 88, pp 218–227. doi:10.1016/j.triboint.2015.03.013
   Web of Science ®Google Scholar
• Guo, F., Jia, X., Longke, W., Salant, R. F., and Wang, Y. (2014), “The Effect of Wear on the Performance of a Rotary Lip Seal,” Journal of Tribology, 136, pp 0417031–0417038. doi:10.1115/1.4027623
   PubMed Web of Science ®Google Scholar
• Salant, R. F., and Shen, D. (2002), “Hydrodynamic Effects of Shaft Surface Finish on Lip Seal Operation,” Tribology Transactions, 45, pp 404–410. doi:10.1080/10402000208982566
   Web of Science ®Google Scholar
• Huang, L., and Sun, Z. B. (2000), “Study on Frictional and Mechanical Performance of PTFE Nanocomposites,” Acta Materiae Compositae Sinica, 17, pp 54–57.
   Google Scholar
• Qi, G., Zhang, X., Li, B., Song, Z., and Qiao, J. (2011), “The Study of Rubber-Modified Plastics with Higher Heat Resistance and Higher Toughness and Its Application,” Polymer Chemistry, 2, pp 1271–1274. doi:10.1039/c0py00413h
   Web of Science ®Google Scholar
• Tavakkoli, H., Meibod, M. P., Frounchi, M., and Dadbin, S. (2011), “Study and Production of Silicone Rubber and Polyethylene Alloy,” Journal of Thermoplastic Composite Materials, 24, pp 669–677. doi:10.1177/0892705711401558
   Web of Science ®Google Scholar
• Gölz, J., Bauer, F., and Haas, W. (2014), “Experimental Study on the Sealing Mechanism of Bidirectional PTFE Lip Seals,” Tribology Transactions, 57, pp 866–870. doi:10.1080/10402004.2014.918236
   Web of Science ®Google Scholar
• Hadinata, P. C., and Stephens, L. S. (2007), “Soft Elastohydrodynamic Analysis of Radial Lip Seals with Deterministic Microasperities on the Shaft,” Journal of Tribology, 129, pp 851–859. doi:10.1115/1.2768087
   Web of Science ®Google Scholar
• Guo, F., Jia, X., Gao, Z., and Wang, Y. (2014), “The Effect of Texture on the Shaft Surface on the Sealing Performance of Radial Lip Seals,” Science China Physics, Mechanics & Astronomy, 57, pp 1343–1351. doi:10.1007/s11433-014-5404-6
   Web of Science ®Google Scholar
• Warren, K. H., and Stephens, L. S. (2009), “Effect of Shaft Microcavity Patterns for Flow and Friction Control on Radial Lip Seal Performance—A Feasibility Study,” Tribology Transactions, 52, pp 731–743. doi:10.1080/10402000903097361
   Web of Science ®Google Scholar
• Jia, X., Jung, S., Haas, W., and Salant, R. F. (2011), “Numerical Simulation and Experimental Study of Shaft Pumping by Laser Structured Shafts with Rotary Lip Seals,” Tribology International, 44, pp 651–659. doi:10.1016/j.triboint.2011.01.005
   Web of Science ®Google Scholar
• Li, W., Stephens, L. S., and Wenk, J. F. (2013), “Experimental Benchmarking of the Numerical Model of a Radial Lip Seal with a Surface Textured Shaft,” Tribology Transactions, 56, pp 75–87. doi:10.1080/10402004.2012.727531
   Web of Science ®Google Scholar
• Yang, A. S., Wen, C. Y., and Tseng, L. Y. (2009), “Analysis of Flow Field Around a Ribbed Helix Seal,” Tribology International, 42, pp 649–656. doi:10.1016/j.triboint.2008.09.003
   Web of Science ®Google Scholar
• Wen, C. Y., Yang, A. S., Tseng, L. Y., and Tsai, W. L. (2011), “Flow Analysis of a Ribbed Helix Lip Seal With Consideration of Fluid-Stucture Interaction,” Computers & Fluids, 40. pp 324–332. doi:10.1016/j.compfluid.2010.10.005
   Web of Science ®Google Scholar
• John, E. (2020), Fluid Mechanics with Engineering Applications, 10th Edition, McGraw-Hill Science: New York, USA.
   Google Scholar
• Wen, S. Z., and Huang, P. (2018), Principle of Tribology, 5th Edition, Tsinghua University Press: Beijing, China.
   Google Scholar
• Li, X., Suo, S., Guo, F., Wu, C., and Jia, X. (2017), “A Study of Reciprocating Seals With a New Mixed‐Lubrication Model Based on Inverse Lubrication Theory,” Lubrication Science, 30, pp, 126–136. doi:10.1002/ls.1410
   Web of Science ®Google Scholar
• Tan, J., Yang, W., Ding, Y., Li, J., Yang, W., Lu, X., and Zhou, H. (2008), “Effect of Garter Spring on the Sealing Performance of Lip seal,” Special Purpose Rubber Products, 29, pp 41–48. doi:10.16574/j.cnki.issn1005-4030.2008.03.016
   Google Scholar
• Mahankar, P. S., and Dhoble, A. S. (2021), “Review of Hydraulic Seal Failures Due to Effect of Medium to High Temperature,” Engineering Failure Analysis, 127, 105552. doi:10.1016/j.engfailanal.2021.105552
   Web of Science ®Google Scholar