Effect of Operating Speed on Turbocharger Compressor Blade Wear

References

• Torregrosa, A. J., Broatch, A., Novella, R., and Mónico, L. F. (2011), “Suitability Analysis of Advanced Diesel Combustion Concepts for Emissions and Noise Control,” Energy, 36, pp 825–838. doi:10.1016/j.energy.2010.12.032
   Web of Science ®Google Scholar
• Bricknell, D. J. (2006), “Marine Gas Turbine Propulsion System Applications,” ASME Turbo Expo 2006: Power for Land, Sea, and Air, May 8–11, 2006, Barcelona, Spain, 42401, pp 85–94. doi:10.1115/GT2006-90751
   Google Scholar
• Cui, X., Yang, C., Serrano, J. R., and Shi, M. (2018), “A Performance Degradation Evaluation Method for a Turbocharger in a Diesel Engine,” Royal Society Open Science, 5, 181093. doi:10.1098/rsos.181093
   PubMed Web of Science ®Google Scholar
• Ntonas, K., Aretakis, N., Roumeliotis, I., Pariotis, E., Paraskevopoulos, Y., and Zannis, T. (2020), “Integrated Simulation Framework for Assessing Turbocharger Fault Effects on Diesel-Engine Performance and Operability,” Journal of Energy Engineering, 146, 04020023.
   Web of Science ®Google Scholar
• Ghenaiet, A. (2010), “Simulation of Particle Trajectories and Erosion Through a Centrifugal Compressor,” ASME Turbo Expo 2010: Power for Land, Sea, and Air, June 14–18, 2010, Glasgow, UK, 44021, pp 1815–1830.
   Google Scholar
• Ghenaiet, A. (2012), “Simulation of Particle Trajectories and Erosion in a Centrifugal Compressor,” Journal of Turbomachinery, 134(5), pp 1–19.
   Web of Science ®Google Scholar
• Aretakis, N., Mathioudakis, K., Kefalakis, M., and Papailiou, K. (2004), “Turbocharger Unstable Operation Diagnosis Using Vibroacoustic Measurements,” Journal of Engineering for Gas Turbines and Power, 126, pp 840–847. doi:10.1115/1.1771686
   Web of Science ®Google Scholar
• Brand, J. F., Fallen, M., and Kammer, H. J. (2008), “Future Technologies against Turbocharger Noise Transferred to Exhaust Systems,” SAE Technical Paper (No. 2008-01-0891). doi:10.4271/2008-01-0891
   Google Scholar
• Liu, C., Cao, Y., Ding, S., Zhang, W., Cai, Y., and Lin, A. (2020), “Effects of Blade Surface Roughness on Compressor Performance and Tonal Noise Emission in a Marine Diesel Engine Turbocharger,” Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering, 234, pp 3476–3490. doi:10.1177/0954407020927637
   Web of Science ®Google Scholar
• Wang, Z., Ma, J., Wang, S., and Wang, M. (2016), “Investigation on the Effects of Blade Corrosion on Compressor Performance,” Journal of the Chinese Institute of Engineers, 39, pp 816–824. doi:10.1080/02533839.2016.1208541
   Web of Science ®Google Scholar
• Finnie, I. (1958), “The Mechanism of Erosion of Ductile Metals,” Proceedings of the Third National Congress on Applied Mechanics, pp 527–532. American Society of Mechanical Engineers: New York.
   Google Scholar
• Finnie, I. (1995), “Some Reflections on the past and Future of Erosion,” Wear, 186-187, pp 1–10. doi:10.1016/0043-1648(95)07188-1
   Web of Science ®Google Scholar
• Bitter, J. G. A. (1963), “A Study of Erosion Phenomena: Part I,” Wear, 6, pp 5–21. doi:10.1016/0043-1648(63)90003-6
   Google Scholar
• Evans, A. G., Gulden, M. E., and Rosenblatt, M. (1978), “Impact Damage in Brittle Materials in the Elastic-Plastic Response Regime,” Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 361, pp 343–365.
   Google Scholar
• Wiederhorn, S. M., and Lawn, B. R. (1979), “Strength Degradation of Glass Impacted with Sharp Particles: I, Annealed Surfaces,” Journal of the American Chemical Society, 62, pp 66–70. doi:10.1111/j.1151-2916.1979.tb18808.x
   Google Scholar
• Hutchings, I. M. (1981), “A Model for the Erosion of Metals by Spherical Particles at Normal Incidence,” Wear, 70, pp 269–281. doi:10.1016/0043-1648(81)90347-1
   Web of Science ®Google Scholar
• Shimizu, K., Noguchi, T., Seitoh, H., and Muranaka, E. (1999), “FEM Analysis of the Dependency on Impact Angle during Erosive Wear,” Wear, 233–235, pp 157–159. doi:10.1016/S0043-1648(99)00174-X
   Web of Science ®Google Scholar
• Liu, Z. G., Wan, S., Nguyen, V. B., and Zhang, Y. W. (2) (2014), “A Numerical Study on the Effect of Particle Shape on the Erosion of Ductile Materials,” Wear, 313, pp 135–142. doi:10.1016/j.wear.2014.03.005
   Web of Science ®Google Scholar
• Kadkhodapour, J., Pourkamali, A. A., and Taherkhani, B. (2015), “Mechanism of Foreign Object Damage and Investigating Effect of Particle Parameters on Erosion Rate of a Rough Surface Using Experimental and Numerical Methods,” Journal of Failure Analysis and Prevention, 15, pp 272–281. doi:10.1007/s11668-015-9926-7
   Google Scholar
• Taherkhani, B., Anaraki, A. P., Kadkhodapour, J., Farahani, N. K., and Tu, H. (2019), “Erosion Due to Solid Particle Impact on the Turbine Blade: Experiment and Simulation,” Journal of Failure Analysis and Prevention, 19, pp 1739–1744. doi:10.1007/s11668-019-00775-y
   Web of Science ®Google Scholar
• Sommerfeld, H., Koch, C., Schwarz, A., and Beck, A. (2021), “High Velocity Measurements of Particle Rebound Characteristics under Erosive Conditions of High Pressure Compressors,” Wear, 470–471, 203626.
   Web of Science ®Google Scholar
• Yang, P., Yue, W., Chen, A., and Bin, G. (2023), “Influence of SiO2 and Al2O3 Particles on Erosion Wear of Aero-Compressor Blades,” Wear, 530-531, 204992. doi:10.1016/j.wear.2023.204992
   Web of Science ®Google Scholar
• Alqallaf, J., Ali, N., Teixeira, J. A., and Addali, A. (2020), “Solid Particle Erosion Behaviour and Protective Coatings for Gas Turbine Compressor Blades—A Review,” Processes, 8, 984. doi:10.3390/pr8080984
   Web of Science ®Google Scholar
• Bonu, V., and Barshilia, H. C. (2022), “High-Temperature Solid Particle Erosion of Aerospace Components: Its Mitigation Using Advanced Nanostructured Coating Technologies,” Coatings, 12, 1979. doi:10.3390/coatings12121979
   Web of Science ®Google Scholar
• Góral, M., Sasiela, D., Płoszaj, F., Kościelniak, B., Kubaszek, T., and Przybyło, A. (2023), “The Erosion Resistance of Cr/CrN Multilayer Coating Deposited Using Industrial Arc-PVD Process for Compressor Blades Application,” Ochrona Przed Korozją, 1, pp 4–8. doi:10.15199/40.2023.3.1
   Google Scholar
• Yang, P., Yue, W., Li, J., Bin, G., and Li, C. (2022), “Review of Damage Mechanism and Protection of Aero-Engine Blades Based on Impact Properties,” Engineering Failure Analysis, 140, 106570. doi:10.1016/j.engfailanal.2022.106570
   Web of Science ®Google Scholar
• Lin, Z., Ruan, X.-D., Zhu, Z.-C., and Fu, X. (2014), “Three-Dimensional Numerical Investigation of Solid Particle Erosion in Gate Valves,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228, pp 1670–1679. doi:10.1177/0954406213498543
   Web of Science ®Google Scholar
• Suzuki, M., Inaba, K., and Yamamoto, M. (2008), “Numerical Simulation of Sand Erosion Phenomena in Rotor/Stator Interaction of Compressor,” Journal of Thermal Science, 17, pp 125–133. doi:10.1007/s11630-008-0125-7
   Web of Science ®Google Scholar
• Dong, X. W., Liu, G. R., Li, Z., and Zeng, W. (2016), “A Smoothed Particle Hydrodynamics (SPH) Model for Simulating Surface Erosion by impacts of foreign particles,” Tribology International. 95pp 267–278. doi:10.1016/j.triboint.2015.11.038
   Web of Science ®Google Scholar
• Dong, X., Li, Z., Feng, L., Sun, Z., and Fan, C. (2017), “Modeling, Simulation, and Analysis of the Impact(s) of Single Angular-Type Particles on Ductile Surfaces Using Smoothed Particle Hydrodynamics,” Powder Technology, 318, pp 363–382. doi:10.1016/j.powtec.2017.06.011
   Web of Science ®Google Scholar
• Mohammadi, B., and Khoddami, A. S. (2020), “Representative Volume Element-Based Simulation of Multiple Solid Particles Erosion of a Compressor Blade Considering Temperature Effect,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234, pp 1173–1184. doi:10.1177/1350650119884825
   Web of Science ®Google Scholar
• Anaraki, P. A., Kadkhodapour, J., and Farahani, K. N. (2014), “Study of Solid Particle Impact Effects and Coating Thickness on the Erosion Damage,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228, pp 2861–2870. doi:10.1177/0954406214524546
   Web of Science ®Google Scholar
• Qattan, A. N., Bahi, A. M. A., and Kada, B. (2022), “Simulation of Transonic Compressor Performance Deterioration Due to Sand Erosion,” American Academic Scientific Research Journal for Engineering, Technology, and Sciences, 90, pp 95–108.
   Google Scholar
• Poursaeidi, E., Tafrishi, H., and Amani, H. (2017), “Experimental-Numerical Investigation for Predicting Erosion in the First Stage of an Axial Compressor,” Powder Technology, 306, pp 80–87. doi:10.1016/j.powtec.2016.10.057
   Web of Science ®Google Scholar
• Li, C., Bin, G., Li, J., and Liu, Z. (2021), “Study on the Erosive Wear of the Gas-Solid Flow of Compressor Blade in an Aero-Turboshaft Engine Based on the Finnie Model,” Tribology International, 163, 107197. doi:10.1016/j.triboint.2021.107197
   Web of Science ®Google Scholar
• Li, C., Bin, G., Li, J., and Yan, P. (2022), “Study on the Influence of Sand Particle Size on Erosion Wear of Compressor Blades in Aviation Turboshaft Engines,” Journal of Mechanical Engineering, 58, pp 180–190.
   Google Scholar
• Li, C., Bin, G., Li, J., and Yang, P. (2023), “Erosion Wear Characteristics of the Aero-Compressor Blades in Full Speed Range,” Powder Technology, 418, 118227. doi:10.1016/j.powtec.2023.118227
   Web of Science ®Google Scholar
• Wang, W., Yang, J., Dai, J., and Chen, A. (2023), “EEMD-Based Videogrammetry and Vibration Analysis Method for Rotating Wind Power Blades,” Measurement, 207, 112423. doi:10.1016/j.measurement.2022.112423
   Web of Science ®Google Scholar
• Liu, R., Pan, Y., Chen, A., Bin, G., and Li, H. (2023), “Study on the Influence of Surface Roughness on the Erosion Characteristics of Compressor Blades,” Powder Technology, 430, 119037. doi:10.1016/j.powtec.2023.119037
   Web of Science ®Google Scholar
• Meng, Y., Xu, J., Jin, Z., Prakash, B., and Hu, Y. (2020), “A Review of Recent Advances in Tribology,” Friction, 8, 221–300. doi:10.1007/s40544-020-0367-2
   Web of Science ®Google Scholar
• Grant, G., and Tabakoff, W. (1973), An Experimental Investigation of the Erosive Characteristics of 2024 Aluminum Alloy. Department of Aerospace Engineering, University of Cincinnati.
   Google Scholar
• Oka, Y. I., Okamura, K., and Yoshida, T. (2005), “Practical Estimation of Erosion Damage Caused by Solid Particle Impact. Part 1: Effects of Impact Parameters on a Predictive ion,” Wear, 259, pp 95–101. doi:10.1016/j.wear.2005.01.039
   Web of Science ®Google Scholar
• Biglarian, M., MomeniLarimi, M., Ganji, B., and Ranjbar, A. (2019), “Prediction of Erosive Wear Locations in Centrifugal Compressor Using CFD Simulation and Comparison with Experimental Model,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41, pp 1–10.
   Web of Science ®Google Scholar
• Li, C., Bin, G., Li, J., Yang, P., and Wang, W. (2022), “Influence of Inlet Distortion on the Wear of Aero-Compressor Blades,” International Journal of Mechanical Sciences, 230, 107551. doi:10.1016/j.ijmecsci.2022.107551
   Web of Science ®Google Scholar
• Bitter, J. G. A. (1963), “A Study of Erosion Phenomena: Part II,” Wear, 6, pp 169–190. doi:10.1016/0043-1648(63)90073-5
   Google Scholar
• Sandoval, O. R., Machado, L. H. J., Hanriot, V. M., Troysi, F., and Faria, M. T. C. (2022), “Acoustic and Vibration Analysis of a Turbocharger Centrifugal Compressor Failure,” Engineering Failure Analysis, 139, 106447. doi:10.1016/j.engfailanal.2022.106447
   Web of Science ®Google Scholar
• Varga, M., Antonov, M., Tumma, M., Adam, K., and Alessio, K. (2019), “Solid Particle Erosion of Refractories: A Critical Discussion of Two Test Standards,” Wear, 426-427, pp 552–561. doi:10.1016/j.wear.2018.12.062
   Web of Science ®Google Scholar
• Finnie, I. (1960), “Erosion of Surfaces by Solid Particles,” Wear, 3, pp 87–103. doi:10.1016/0043-1648(60)90055-7
   Google Scholar
• Mu, L., Wang, S., Zhai, Z., Shang, Y., Zhao, C., Zhao, L., and Yin, H. (2020), “Unsteady CFD Simulation on ash Particle Deposition and Removal Characteristics in Tube Banks: Focusing on Particle Diameter, Flow Velocity, and Temperature,” Journal of the Energy Institute, 93, pp 1481–1494. doi:10.1016/j.joei.2020.01.010
   Web of Science ®Google Scholar