Advanced search
Publication Cover
Journal of Natural Fibers Volume 21, 2024 - Issue 1
Submit an article Journal homepage
219
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Influence of the Sampling Area on the Chemical, Physical, and Mechanical Properties of Grewia bicolor(GB) Fiber for Potential Use in the Reinforcement of Tannin Matrix Composites

MICHEL MBERE TAOGAa Laboratory of Mechanic (LM), Doctoral Training Unit in Engineering Sciences (UFD-SI), University of Douala, Douala, Cameroon;b Department of Mechanical Engineering, ENSET, University of Douala, Douala, Cameroon;c Groupe de Recherche des Matériaux Innovants(GRMI), Université de Douala, Douala, CameroonCorrespondence[email protected]
ORCID Iconhttps://orcid.org/0009-0001-1905-7117View further author information
ORCID Icon,
Fabien Betene Ebandaa Laboratory of Mechanic (LM), Doctoral Training Unit in Engineering Sciences (UFD-SI), University of Douala, Douala, Cameroon;b Department of Mechanical Engineering, ENSET, University of Douala, Douala, Cameroon;c Groupe de Recherche des Matériaux Innovants(GRMI), Université de Douala, Douala, CameroonORCID Iconhttps://orcid.org/0000-0001-5436-7084View further author information
ORCID Icon,
Antonio Pizzid LERMAB-ENSTIB, University of Lorraine, Epinal, FranceORCID Iconhttps://orcid.org/0000-0002-9749-7185View further author information
ORCID Icon,
Benoit Ndiwea Laboratory of Mechanic (LM), Doctoral Training Unit in Engineering Sciences (UFD-SI), University of Douala, Douala, Cameroon;b Department of Mechanical Engineering, ENSET, University of Douala, Douala, Cameroon;c Groupe de Recherche des Matériaux Innovants(GRMI), Université de Douala, Douala, CameroonORCID Iconhttps://orcid.org/0000-0003-0692-0353View further author information
ORCID Icon,
Pierre Marcel Anicet Noaha Laboratory of Mechanic (LM), Doctoral Training Unit in Engineering Sciences (UFD-SI), University of Douala, Douala, Cameroon;b Department of Mechanical Engineering, ENSET, University of Douala, Douala, Cameroon;c Groupe de Recherche des Matériaux Innovants(GRMI), Université de Douala, Douala, CameroonORCID Iconhttps://orcid.org/0000-0002-6942-7569View further author information
ORCID Icon,
Jonas Peequeur Essome Mbanga Laboratory of Mechanic (LM), Doctoral Training Unit in Engineering Sciences (UFD-SI), University of Douala, Douala, Cameroon;b Department of Mechanical Engineering, ENSET, University of Douala, Douala, Cameroon;c Groupe de Recherche des Matériaux Innovants(GRMI), Université de Douala, Douala, CameroonORCID Iconhttps://orcid.org/0009-0008-6532-8003View further author information
ORCID Icon,
Kevin Kibong Kimbib Department of Mechanical Engineering, ENSET, University of Douala, Douala, CameroonView further author information
,
Etinge Tabi Akwob Department of Mechanical Engineering, ENSET, University of Douala, Douala, CameroonView further author information
&
César Segoviae CETELOR, University of Lorraine, FranceORCID Iconhttps://orcid.org/0000-0001-8069-4724View further author information
ORCID Icon show all
Article: 2346121 | Published online: 02 May 2024

References

  • Amiri, A., Z. Triplett, A. Moreira, N. Brezinka, M. Alcock, and C. A. Ulven. 2017. “Standard Density Measurement Method Development for Flax Fiber.” Industrial Crops and Products 96:196–21. https://doi.org/10.1016/j.indcrop.2016.11.060.
  • Anderson, J., and J. Thornback. 2012. “A Guide to Understanding the Embodied Impacts of Construction Products.” Construction Products Association 12:2013.
  • Arias, A., S. González-García, G. Feijoo, and M. T. Moreira. 2022. “Tannin-Based Bio-Adhesives for the Wood Panel Industry As Sustainable Alternatives to Petrochemical Resins.” Journal of Industrial Ecology 26 (2): 627–642. https://doi.org/10.1111/jiec.13210.
  • ArunRamnath, R., S. Murugan, M. Sanjay, A. Vinod, S. Indran, A. Y. Elnaggar, A. M. Fallatah, and S. Siengchin. 2023. “Characterization of Novel Natural Cellulosic Fibers from Abutilon Indicum for Potential Reinforcement in Polymer Composites.” Polymer Composites 44 (1): 340–355. https://doi.org/10.1002/pc.27100.
  • Asim, M., K. Abdan, M. Jawaid, M. Nasir, Z. Dashtizadeh, M. Ishak, and M. E. Hoque. 2015. “A Review on Pineapple Leaves Fibre and Its Composites.” International Journal of Polymer Science 2015:1–16. https://doi.org/10.1155/2015/950567.
  • Augustino, S., J. B. Hall, F. B. Makonda, and R. C. Ishengoma, 2011. Medicinal Resources of the Miombo Woodlands of Urumwa, Tanzania: Plants and Its Uses.
  • Béakou, A., R. Ntenga, J. Lepetit, J. A. Atéba, and L. O. Ayina. 2008. “Physico-Chemical and Microstructural Characterization of “Rhectophyllum camerunense” Plant Fiber.” Composites Part A, Applied Science and Manufacturing 39 (1): 67–74. https://doi.org/10.1016/j.compositesa.2007.09.002.
  • Beldjoud, N., and F. Ghadbane. 2020. “L’impact du traitement écologique à base du bicarbonate de sodiumsur les propriétés des fibre végétales.” PhD Thesis, Univ M’sila.
  • Betene, A. D. O., F. E. Betene, F. Martoïa, P. J. Dumont, A. Atangana, and P. M. A. Noah. 2020. “Physico-Chemical and Thermal Characterization of Some Lignocellulosic Fibres: Ananas Comosus (AC), Neuropeltis Acuminatas (NA) and Rhecktophyllum Camerunense (RC).” Journal of Minerals and Materials Characterization and Engineering 8 (4): 205–222. https://doi.org/10.4236/jmmce.2020.84014.
  • Betené, A. D. O., F. E. Betené, F. E. Ngali, P. M. A. Noah, B. Ndiwé, A. G. Soppie, A. Atangana, and R. Moukené. 2022. “Influence of Sampling Area and Extraction Method on the Thermal, Physical and Mechanical Properties of Cameroonian Ananas Comosus Leaf Fibers.” Heliyon 8 (8): e10127. https://doi.org/10.1016/j.heliyon.2022.e10127.
  • Betene Ebanda, F. 2012. “Study of the Mechanical and Thermal Properties of Plaster Reinforced with Tropical Plant Fibers.” PhD Thesis, Clermont-Ferrand 2.
  • Brink, M., ed. 2007. Grewia bicolor juss, in: Ressources végétales de l’Afrique tropicale 7(1), Bois D’oeuvre 1, 335–337. Geningen, Netherlands: PROTA Foundation.
  • Bureaux, H. 2011. “Availability and Accessibility of Plant Fibers for Material Uses in France 84”.
  • Célino, A., O. Gonçalves, F. Jacquemin, and S. Fréour. 2014. “Qualitative and Quantitative Assessment of Water Sorption in Natural Fibers Using ATR-FTIR Spectroscopy.” Carbohydrate Polymers 101:163–170. https://doi.org/10.1016/j.carbpol.2013.09.023.
  • Charlet, K., C. Baley, C. Morvan, J. P. Jernot, M. Gomina, and J. Bréard. 2007. “Characteristics of Hermès Flax Fibres As a Function of Their Location in the Stem and Properties of the Derived Unidirectional Composites.” Composites Part A, Applied Science and Manufacturing 38 (8): 1912–1921. https://doi.org/10.1016/j.compositesa.2007.03.006.
  • Chengoue Mbouyap, A., T. Tchotang, C. Fokam Bopda, H. L. Assonfack, J. B. Saha Tchinda, and M. A. Cheumani Yona. 2023. “Impact of Cultivation Area on the Physical, Chemical, and Mechanical Properties of Banana Pseudo-Stems Fibers in Cameroon.” Journal of Natural Fibers 20 (2): 2198274. https://doi.org/10.1080/15440478.2023.2198274.
  • Chengoué, A. M., T. Tchotang, C. B. Fokam, and B. Kenmeugne. 2020. “Influence of Extractions Techniques on the Physico-Mechanical Properties of Banana Pseudo-Stem Fibers.” Journal of Materials and Environmental Science 11:1121–1128. https://www.jmaterenvironsci.com/Document/vol11/vol11_N7/JMES-2020-1198-Chengoue.pdf.
  • Chupin, L. 2014. “Study of the Extraction of Tannins from Maritime Pine Bark for the Development of Tannin-Lignosulfonate Glues.” PhD Thesis, Pau.
  • Dai, D., and M. Fan. 2011. “Investigation of the Dislocation of Natural Fibres by Fourier-Transform Infrared Spectroscopy.” Vibrational Spectroscopy 55 (2): 300–306. https://doi.org/10.1016/j.vibspec.2010.12.009.
  • Dallel, M. 2012. “Evaluation of the Textile Potential of Alfa Fibers (Stipa Tenacissima L.): Physicochemical Characterization from Fiber to Yarn.” PhD Thesis, Université de Haute AlsaceMulhouse.
  • Del Rio, J. C., A. Gutiérrez, I. M. Rodríguez, D. Ibarra, and A. T. Martinez. 2007. “Composition of Nonwoody Plant Lignins and Cinnamic Acids by Py-GC/MS, Py/TMAH and FT-IR.” Journal of Analytical and Applied Pyrolysis 79 (1–2): 39–46. https://doi.org/10.1016/j.jaap.2006.09.003.
  • Djebloun, Y. 2018. “Contribution à la caractérisation des matériaux composites renforcés de fibres végétales.” doctoral, UNIVERSITE MOHAMED KHIDER BISKRA.
  • Dumont, P., L. OrgéOrgéAs, F. Martoïa, T. Budtova, and M. Vincent. 2017. “Polymer Composites and Lignocellulosic Fibers-Properties, Processing and Characterization.” Fr Berzin 160–201.
  • Duval, A., A. Bourmaud, L. Augier, and C. Baley. 2011. “Influence of the Sampling Area of the Stem on the Mechanical Properties of Hemp Fibers.” Materials letters 65 (4): 797–800. https://doi.org/10.1016/j.matlet.2010.11.053.
  • Elie, A. 2012. “Firewood Potential Production of Three Sahelian Woody Species (Grewia Bicolor, Pterocarpus Lucens and Combretum Glutinosum) in Ferlo (Northern Senegal).” Advances in Environmental Biology 6:2329–2334. https://www.researchgate.net/profile/Kindomihou-Valentin/publication/259502642_Firewood_potential_production_of_three_sahelian_woody_species_Grewia_bicolor_Pterocarpus_lucens_and_Combretum_glutinosum_in_Ferlo_Northern_Senegal/links/0deec52c56e50d30dd000000/Firewood-potential-production-of-three-sahelian-woody-species-Grewia-bicolor-Pterocarpus-lucens-and-Combretum-glutinosum-in-Ferlo-Northern-Senegal.pdf.
  • Essabir, H., R. Boujmal, M. O. Bensalah, D. Rodrigue, R. Bouhfid, and A. E. K. Qaiss. 2016. “Mechanical and Thermal Properties of Hybrid Composites: Oil-Palm Fiber/Clay Reinforced High Density Polyethylene.” Mechanics of Materials 98:36–43. https://doi.org/10.1016/j.mechmat.2016.04.008.
  • Fali, A., S. T. White, T. G. Folland, M. He, N. A. Aghamiri, S. Liu, J. H. Edgar, J. D. Caldwell, R. F. Haglund, and Y. Abate. 2019. “Refractive Index-Based Control of Hyperbolic Phonon-Polariton Propagation.” Nano Letters 19 (11): 7725–7734. https://doi.org/10.1021/acs.nanolett.9b02651.
  • Faruk, O., A. K. Bledzki, H.-P. Fink, and M. Sain. 2012. “Biocomposites Reinforced with Natural Fibers: 2000–2010.” Progress in Polymer Science 37 (11): 1552–1596. https://doi.org/10.1016/j.progpolymsci.2012.04.003.
  • Ganaba, S., J. M. Ouadba, and O. Bognounou. 2004. “House-Building Plants in the Sahelian Region.” Bois Forets Trop 282:11–17.
  • Garside, P., and P. Wyeth. 2003. “Identification of Cellulosic Fibres by FTIR Spectroscopy-Thread and Single Fibre Analysis by Attenuated Total Reflectance.” Studies in Conservation 48 (4): 269–275. https://doi.org/10.1179/sic.2003.48.4.269.
  • Gurunathan, T., S. Mohanty, and S. K. Nayak. 2015. “A Review of the Recent Developments in Biocomposites Based on Natural Fibres and Their Application Perspectives.” Composites Part A: Applied Science and Manufacturing 77:1–25. https://doi.org/10.1016/j.compositesa.2015.06.007.
  • Heuzé, V., G. Tran, R. Delagarde, D. Bastianelli, and F. Lebas. 2015. False Brandy Bush (Grewia Bicolor).
  • Hicham, A., and S. Abdessalam. 2019. “Caractérisation et élaboration d’un matériaux composites Jute (déchets)/Polyester.” Thesis, Université de MOHAMED BOUDIAF - M’SILA.
  • Jamshaid, H., U. Hussain, R. Mishra, M. Tichy, and M. Muller. 2021. “Turning Textile Waste into Valuable Yarn.” Cleaner Engineering and Technology 5:100341. https://doi.org/10.1016/j.clet.2021.100341.
  • Jeyapragash, R., V. Srinivasan, and S. Sathiyamurthy. 2020. “Mechanical Properties of Natural Fiber/Particulate Reinforced Epoxy Composites–A Review of the Literature.” Materials Today: Proceedings 22:1223–1227. https://doi.org/10.1016/j.matpr.2019.12.146.
  • Kılınç, A. Ç., S. Köktaş, Y. Seki, M. Atagür, R. Dalmış, Ü. H. Erdoğan, A. A. Göktaş, and M. Ö. Seydibeyoğlu. 2018. “Extraction and Investigation of Lightweight and Porous Natural Fiber from Conium Maculatum As a Potential Reinforcement for Composite Materials in Transportation.” Composites Part B Engineering 140:1–8. https://doi.org/10.1016/j.compositesb.2017.11.059.
  • Konai, N., A. Pizzi, R. Danwe, M. Lucien, and K. Tapsia. 2020. “Thermomechanical Analysis of African Tannins Resins and Biocomposite Characterization.” Journal of Adhesion Science and Technology 35 (14): 1492–1499. https://doi.org/10.1080/01694243.2020.1850611.
  • Konai, N., A. Pizzi, D. Raidandi, M. Lagel, C. L’Hostis, C. Saidou, A. Hamido, S. Abdalla, F. Bahabri, and A. Ganash. 2015. “Aningre (Aningeria Spp.) Tannin Extract Characterization and Performance As an Adhesive Resin.” Industrial Crops and Products 77:225–231. https://doi.org/10.1016/j.indcrop.2015.08.053.
  • Kossoumna Liba’a, N. 2008. “De la mobilité à la sédentarisation : gestion des ressources naturelles et des territoires par les éleveurs Mbororo au Nord du Cameroun.” PhD Thesis, UPV.
  • Kueny, R. 2013. “Biocomposites: High-Tech Composites with Natural Fiber Reinforcement and Natural Resin Matrix.” PhD Thesis, University of Lorraine.
  • Legrand, N. B. R., O. Fabien, B. E. Pierre, N. P. Marcel, and A. A. Jean. 2020. “Physico-Chemical and Thermal Characterization of a Lignocellulosic Fiber, Extracted from the Bast of Cola Lepidota Stem.” Journal of Minerals and Materials Characterization and Engineering 8 (5): 377–392. https://doi.org/10.4236/jmmce.2020.85024.
  • Libog, L., J. Aime, N. Joseph, B. Ndiwe, L. Meva’a, A. Ateba, and L. Laurent. 2021. “Physico-Chemical and Thermal Characterization of the Banana Pseudo-Stem Fibers (BF).” European Journal of Experimental Biology 9:33–52. https://www.researchgate.net/publication/353347593_PHYSICO-CHEMICAL_AND_THERMAL_CHARACTERIZATION_OF_THE_BANANA_PSEUDO-STEM_FIBERS_BF?_tp=eyJjb250ZXh0Ijp7ImZpcnN0UGFnZSI6ImhvbWUiLCJwYWdlIjoic2VhcmNoIiwicG9zaXRpb24iOiJwYWdlSGVhZGVyIn19.
  • Libog, L., F. Biyeme, A. Betené, A. Biwolé, B. Ndiwe, J. P. Essome Mbang, C. Takoumbe, J. Aimé Mbey, and J. Meva’a. 2023. “Influence of the Extraction Location on the Physical and Mechanical Properties of the Pseudo-Trunk Banana Fibers.” Journal of Natural Fibers 20 (2). https://doi.org/10.1080/15440478.2023.2204451.
  • Li, X., L. G. Tabil, and S. Panigrahi. 2007. “Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review.” Journal of Polymers and the Environment 15 (1): 25–33. https://doi.org/10.1007/s10924-006-0042-3.
  • Magniont, C. 2010. “Contribution à la formulation et à la caractérisation d’un écomatériau de construction à base d’agroressources.” PhD Thesis, Toulouse 3.
  • Mansouri, N.-E.-E., A. Pizzi, and J. Salvado. 2007. “Lignin-Based Polycondensation Resins for Wood Adhesives.” Journal of Applied Polymer Science 103 (3): 1690–1699. https://doi.org/10.1002/app.25098.
  • Marimuthu, K. P., S. M. Kumar, V. R. Kumar, and H. K. Govindaraju. 2019. “Characterization of Mechanical Properties of Epoxy Reinforced with Glass Fiber and Coconut Fiber.” Materials Today: Proceedings 16:661–667. https://doi.org/10.1016/j.matpr.2019.05.143.
  • Mbang, J. P. E., P. M. A. Noah, L. Libog, T. Ngoup, M. M. Taoga, and F. B. Ebanda. 2023. “State of Knowledge on Starch As an Alternative Solution to Petrochemical Resources—A Review.” Journal of Minerals and Materials Characterization and Engineering 11 (2): 49–62. https://doi.org/10.4236/jmmce.2023.112005.
  • Mewoli, A. E., C. Segovia, F. B. Ebanda, A. Ateba, P. M. A. Noah, B. Ndiwe, and A. E. Njom. 2020. “Physical-Chemical and Mechanical Characterization of the Bast Fibers of Triumfetta Cordifolia A.Rich. from the Equatorial Region of Cameroon.” Journal of Minerals and Materials Characterization and Engineering 8 (4): 163–176. https://doi.org/10.4236/jmmce.2020.84011.
  • Mewoli, A. E., C. Segovia, A. E. Njom, F. B. Ebanda, J. J. Eyinga Biwôlé, C. Xinyi, A. Ateba, P. Girods, A. Pizzi, and N. Brosse. 2023. “Characterization of Tannin Extracted from Aningeria Altissima Bark and Formulation of Bioresins for the Manufacture of Triumfetta Cordifolia Needle-Punched Nonwovens Fiberboards: Novel Green Composite Panels for Sustainability.” Industrial Crops and Products 206:117734. https://doi.org/10.1016/j.indcrop.2023.117734.
  • Mishra, S. S., T. Mohapatra, S. S. Sahoo, and P. Mishra. 2022. “Overall Performance Investigation and Optimization of a Multi-Fuel Operated Compression Ignition Engine Using Coupled Taguchi and Grey Relational Analysis.” American Chemical Society Omega 7 (37): 33216–33232. https://doi.org/10.1021/acsomega.2c03566.
  • Moonart, U., and S. Utara. 2019. “Effect of Surface Treatments and Filler Loading on the Properties of Hemp Fiber/Natural Rubber Composites.” Cellulose 26 (12): 7271–7295. https://doi.org/10.1007/s10570-019-02611-w.
  • Morgenstern, O., K. A. Stone, R. Schofield, H. Akiyoshi, Y. Yamashita, D. E. Kinnison, R. R. Garcia, et al. 2018. “Ozone Sensitivity to Varying Greenhouse Gases and Ozone-Depleting Substances in CCMI-1 Simulations.” Atmospheric Chemistry & Physics 18 (2): 1091–1114. https://doi.org/10.5194/acp-18-1091-2018.
  • Mouhoubi, S., H. Osmani, T. Bali, and S. Abdeslam. 2012. “Elaboration and Properties Study of Treated and Untreated Polyester-Alfa Composites.”
  • Nam, S., and A. N. Netravali. 2006. “Green Composites. I. Physical Properties of Ramie Fibers for Environment-Friendly Green Composites.” Fibers and Polymers 7 (4): 372–379. https://doi.org/10.1007/BF02875769.
  • Ndiwe, B., N. Konai, A. D. O. Betené, A. Pizzi, A. G. Wedaïna, F. Nzogning, A. Mewoli, et al. 2023. “Characterization of Grewia Bicolor Fibre and Its Use in the Development of Composites.” International Wood Products Journal 14 (2): 1–13. https://doi.org/10.1080/20426445.2023.2223936.
  • Ndiwe, B., A. Pizzi, B. Tibi, R. Danwe, N. Konai, and S. Amirou. 2019. “African Tree Bark Exudate Extracts As Biohardeners of Fully Biosourced Thermoset Tannin Adhesives for Wood Panels.” Industrial Crops and Products 132:253–268. https://doi.org/10.1016/j.indcrop.2019.02.023.
  • Nenonene, A. 2009. “Development and Mechanical Characterization of Kenaf Stem Particleboards and Bioadhesives Based on Bone Glue, Tannin or Mucilage.” PhD Thesis.
  • Ngoup, T., N. D. Efeze, T. Kanaa, J. P. E. Mbang, S. César, and N. Nnanga, et N. Ebénézer. 2024. “Physical, Chemical and Mechanical Characterization of Sida Rhombifolia Fibers from the Center Region of Cameroon for Their Potential Use in Textiles and Composites.” Journal of Natural Fibers 21 (janvier). https://doi.org/10.1080/15440478.2023.2294478.
  • Nicollin, A., R. Kueny, L. Toniazzo, and A. Pizzi. 2012. “High Density Biocomposite from Natural Fibers and Tannin Resin.” Journal of Adhesion Science and Technology 26 (10–11): 1537–1545. https://doi.org/10.1163/156856111X618399.
  • Noah, P. M. A., E. F. Betene, S. V. Obame, B. Allasra, M. C. Bindjeme, and A. Atangana. 2020. “Elaboration and Characterization of a Hybrid Composite Material with Two Particles of the Same Size: Coco Shells and Palm Shells.” Open Journal of Composite Materials 10 (4): 77–91. https://doi.org/10.4236/ojcm.2020.104006.
  • Obame, S. V., A. D. O. Betené, P. M. Naoh, F. E. Betené, and A. Atangana. 2022. “Characterization of the Neuropeltis Acuminatas Liana Fiber Treated As Composite Reinforcement.” Results in Materials 16:100327. https://doi.org/10.1016/j.rinma.2022.100327.
  • Orwa, C., A. Mutua, R. Kindt, R. Jamnadass, and A. Simons. 2009. Agroforestree Database: A Tree Reference and Selection Guide. Version 4.
  • Pereira, P. H. F., M. D. F. Rosa, M. O. H. Cioffi, K. C. C. D. C. Benini, A. C. Milanese, H. J. C. Voorwald, and D. R. Mulinari. 2015. “Vegetal Fibers in Polymeric Composites: A Review.” Polímeros 25 (1): 9–22. https://doi.org/10.1590/0104-1428.1722.
  • Phung, T. A. 2018. “Formulation and Characterization of an Earth-Plant Fiber Composite: Bauge.” PhD Thesis, Normandie Université.
  • Pickering, K. L., G. W. Beckermann, S. N. Alam, and N. J. Foreman. 2007. “Optimising Industrial Hemp Fibre for Composites.” Composites Part A, Applied Science and Manufacturing 38 (2): 461–468. https://doi.org/10.1016/j.compositesa.2006.02.020.
  • Ping, L., F. Gambier, A. Pizzi, Z. D. Guo, and N. Brosse. 2012. “Wood Adhesives from Agricultural Byproducts: Lignins and Tannins for the Elaboration of Particleboards.” Cellulose Chemistry and Technology 46:457–462. https://scholar.google.com/scholar?hl=fr&as_sdt=0%2C5&q=Wood+Adhesives+from+Agricultural+Byproducts%3A+Lignins+and+Tannins+for+the+Elaboration+of+Particleboard&btnG=.
  • Ping, L., A. Pizzi, Z. D. Guo, and N. Brosse. 2012. “Condensed Tannins from Grape Pomace: Characterization by FTIR and MALDI TOF and Production of Environment Friendly Wood Adhesive.” Industrial Crops and Products 40:13–20. https://doi.org/10.1016/j.indcrop.2012.02.039.
  • Pizzi, A. 2006. “Recent Developments in Eco-Efficient Bio-Based Adhesives for Wood Bonding: Opportunities and Issues.” Journal of Adhesion Science and Technology 20 (8): 829–846. https://doi.org/10.1163/156856106777638635.
  • Pizzi, A., R. Kueny, F. Lecoanet, B. Massetau, D. Carpentier, A. Krebs, F. Loiseau, S. Molina, and M. Ragoubi. 2009. “High resin content natural matrix–natural fibre biocomposites.” Industrial Crops and Products 30 (2): 235–240. https://doi.org/10.1016/j.indcrop.2009.03.013.
  • Ramesh, M., L. RajeshKumar, and V. Bhuvaneshwari. 2021. “Bamboo Fiber Reinforced Composites.” In Bamboo Fiber Composites, edited by M. Jawaid, S. Mavinkere Rangappa, and S. Siengchin, 1–13. Singapore: Composites Science and Technology. Springer. https://doi.org/10.1007/978-981-15-8489-3_1.
  • Rhazi, N. 2015. “Development of Eco-Friendly Sticky Mixes from Acacia Mollissima Bark from Morocco.” PhD Thesis, Pau.
  • Ringuette, B. 2011. “Matériaux composites à base de fibres de chanvre.” PhD Thesis, Laval.
  • Rohen, L. A., A. C. Neves, D. D. P. Mantovani, F. C. Maurício, J. da Silva Vieira, L. D. A. Pontes, F. M. Margem, and S. Monteiro. 2017. “Hemp Fiber Density Using the Pycnometry Technique.” In Characterization of Minerals, Metals, and Materials 2017, edited by S. Ikhmayies, 423–428. Springer. https://doi.org/10.1007/978-3-319-51382-9_46.
  • Ronald Aseer, J., K. Sankaranarayanasamy, P. Jayabalan, R. Natarajan, and K. Priya Dasan. 2013. “Morphological, Physical, and Thermal Properties of Chemically Treated Banana Fiber.” Journal of Natural Fibers 10 (4): 365–380. https://doi.org/10.1080/15440478.2013.824848.
  • Saad, H. 2013. “Development of Bio-Composites Based on Plant Fibers and Ecological Glues.” These de doctorat, Pau.
  • Saba, N., M. Jawaid, O. Y. Alothman, M. Paridah, and A. Hassan. 2016. “Recent Advances in Epoxy Resin, Natural Fiber-Reinforced Epoxy Composites and Their Applications.” Journal of Reinforced Plastics & Composites 35 (6): 447–470. https://doi.org/10.1177/0731684415618459.
  • Sango, T., A. M. C. Yona, L. Duchatel, A. Marin, M. K. Ndikontar, N. Joly, and J.-M. Lefebvre. 2018. “Step–Wise Multi–Scale Deconstruction of Banana Pseudo–Stem (Musa Acuminata) Biomass and Morpho–Mechanical Characterization of Extracted Long Fibres for Sustainable Applications.” Industrial Crops and Products 122:657–668. https://doi.org/10.1016/j.indcrop.2018.06.050.
  • Santos, J., G. Antorrena, M. S. Freire, A. Pizzi, and J. Gonzalez-Alvarez. 2017. “Environmentally Friendly Wood Adhesives Based on Chestnut (Castanea Sativa) Shell Tannins.” European Journal of Wood and Wood Products 75 (1): 89–100. https://doi.org/10.1007/s00107-016-1054-x.
  • Sauget, A., A. Nicollin, and A. Pizzi. 2013. “Fabrication and Mechanical Analysis of Mimosa Tannin and Commercial Flax Fibers Biocomposites.” Journal of Adhesion Science and Technology 27 (20): 2204–2218. https://doi.org/10.1080/01694243.2013.767151.
  • Scarpa, F., S. Amroune, and A. Bezazi. 2015. “Analyse Statistique Et Effet des Traitements Chimique Sur leComportement Physico - Mécanique des Fibres des Bras de Grappe desPalmiers Dattier = Statistical Analysis and Effect of Chemical Treatment on the Physicomechanical Behavior of Fibres from Date-Palm Fruit Branches.” Synthèse : Revue des Sciences et de la Technologie 31:108–120. https://doi.org/10.12816/0027867.
  • Sealy-Fisher, V. J., and A. Pizzi. 1992. “Increased Pine Tannins Extraction and Wood Adhesives Development by Phlobaphenes Minimization.” European Journal of Wood and Wood Products 50 (5): 212–220. https://doi.org/10.1007/BF02663290.
  • Seignobos, C., and H. Tourneux. 2002. Le Nord-Cameroun à travers ses mots: dictionnaire de termes anciens et modernes: province de l’extrême-nord. KARTHALA Editions. https://scholar.google.com/scholar?hl=fr&as_sdt=0%2C5&q=Seignobos%2C+C.%2C+and+H.+Tourneux.+2002.+Le+Nord-Cameroun+%C3%A0+travers+ses+mots%3A+dictionnaire+de+termes+anciens+et+modernes%3A+province+de+l%E2%80%99extr%C3%AAme-nord.+KARTHALA+Editions.&btnG=.
  • Seki, Y., A. Ç. Kıilıinç, R. Dalmıiş, S. Köktaş, and E. Çelik. 2019. “Characterization of Flax, Jute, and Sisal Fibers After Sodium Perborate Modification.” AATCC Journal of Research 6 (6): 25–31. https://doi.org/10.14504/ajr.6.6.4.
  • Sikame Tagne, N. R., E. Njeugna, M. Fogue, J.-Y. Drean, A. Nzeukou, and D. Fokwa. 2014. “Study of Water Absorption in Raffia Vinifera Fibres from Bandjoun, Cameroon.” Scientific World Journal 2014.
  • Singh, G., S. Jose, D. Kaur, and B. Soun. 2020. “Extraction and Characterization of Corn Leaf Fiber.” Journal of Natural Fibers 19 (5): 1581–1591. https://doi.org/10.1080/15440478.2020.1787914.
  • Soppie, A. G., A. D. O. Betene, P. M. A. Noah, A. E. Njom, F. B. Ebanda, A. Ateba, A. Mewoli, D. N. Efeze, and R. Moukene. 2023. “Chemical Extraction and Its Effect on the Properties of Cordleaf Burbark (Triumphetta Cordifolia A. Rich) Fibres for the Manufacture of Textile Yarns.” Heliyon 9 (6): e17581. https://doi.org/10.1016/j.heliyon.2023.e17581.
  • Stawski, D., E. Çalişkan, N. D. Yilmaz, and I. Krucińska. 2020. “Thermal and Mechanical Characteristics of Okra (Abelmoschus Esculentus) Fibers Obtained via Water-And Dew-Retting.” Applied Sciences 10 (15): 5113. https://doi.org/10.3390/app10155113.
  • Subramanya, R., K. G. Satyanarayana, and B. Shetty Pilar. 2017. “Evaluation of Structural, Tensile and Thermal Properties of Banana Fibers.” Journal of Natural Fibers 14 (4): 485–497. https://doi.org/10.1080/15440478.2016.1212771.
  • Thébault, M., A. Pizzi, S. Dumarçay, P. Gerardin, E. Fredon, and L. Delmotte. 2014. “Polyurethanes from Hydrolysable Tannins Obtained without Using Isocyanates.” Industrial Crops and Products 59:329–336. https://doi.org/10.1016/j.indcrop.2014.05.036.
  • Trosa, A., and A. Pizzi. 2001. “A No-Aldehyde Emission Hardener for Tannin-Based Wood Adhesives for Exterior Panels.” Holz als Roh- und Werkstoff 59 (4): 266–271. https://doi.org/10.1007/s001070100200.
  • Vidil, L. 2019. “Study of 2D Natural Materials - Potential for Use As Reinforcement in 307P Composite Materials.”
  • Wambua, P., J. Ivens, and I. Verpoest. 2003. “Natural Fibres: Can They Replace Glass in Fibre Reinforced Plastics?” Composites Science and Technology 63 (9): 1259–1264. https://doi.org/10.1016/S0266-3538(03)00096-4.
  • Wedaïna, A. G., A. Pizzi, W. Nzie, R. Danwe, N. Konaï, S. Amirou, C. Segovia, and R. Kueny. 2021. “Performance of Unidirectional Biocomposite Developed with Piptadeniastrum Africanum Tannin Resin and Urena Lobata Fibers As Reinforcement.” Journal of Renewable Materials 9:477–493. https://doi.org/10.32604/jrm.2020.012782.
  • Xi, X., A. Pizzi, C. Gerardin, X. Chen, and S. Amirou. 2020. “Soy Protein Isolate-Based Polyamides As Wood Adhesives.” Wood Science and Technology 54 (1): 89–102. https://doi.org/10.1007/s00226-019-01141-9.
  • Yilmaz, N. D., M. Sulak, K. Yilmaz, and F. Kalin. 2016. “Physical and Chemical Properties of Water-Retted Fibers Extracted from Different Locations in Corn Husks.” Journal of Natural Fibers 13 (4): 397–409. https://doi.org/10.1080/15440478.2015.1029201.
  • Yilmaz, N., M. Sulak, K. Yılmaz, and G. M. Khan. 2017. “Effect of Chemical Treatments on Physicochemical Properties of Fibres from Banana Fruit and Bunch Stems.” Indian Journal of Fibre & Textile Research 42:111–117. https://doi.org/10.56042/ijftr.v42i1.8684.
  • Youmssi, D., Y. D. Bampel, J. Njankouo, J.-B. Saha Tchinda, and M. Ndikontar. 2017. “Chemical Composition of Some Plantation Wood Species (Eucalyptus Saligna, Cupressus Lusitanica and Eucalyptus Paniculata) and Assessment of Compatibility with Plaster.” Journal of the Indian Academy of Wood Science 14 (2): 146–153. https://doi.org/10.1007/s13196-017-0200-3.
  • Zhu, J., H., Abhyankar, and J. Njuguna. 2013. “Effect of Fibre Treatment on Water Absorption and Tensile Properties of Flax/Tannin Composites.” Proceedings of the ICMR.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.