Numerical and experimental 3-point bending quasi-static flexural behavior of single-strap joints joined using AF163-2K adhesive films

References

• Birro, T. V.; Aufray, M.; Paroissien, E.; Lachaud, F. Assessment of Interface Failure Behavior for Brittle Adhesive Using the Three-Point Bending Test. Int. J. Adhes. Adhes. 2021, 110, 1–20. DOI: 10.1016/j.ijadhadh.2021.102891.
   Web of Science ®Google Scholar
• Prolongo, S. G.; Horcajo, K. F.; Del Rosario, G.; Ureña, A. Strength and Durability of Epoxy-Aluminum Joints. J. Adhes. 2010, 86(4), 409–429. DOI: 10.1080/00218461003704345.
   Web of Science ®Google Scholar
• Geiss, P. L.; Schumann, M. Investigation of the Mechanical Properties of Interphases in Adhesively Bonded Epoxy-Aluminum Joints by Localized Micro Extensometry. J. Adhes. 2012, 88(11–12), 941–955. DOI: 10.1080/00218464.2012.725616.
   Web of Science ®Google Scholar
• Majid, J. O.; Mohammad Reza, M. S. Investigation of Defect Effects on Adhesively Bonded Joint Strength Using Cohesive Zone Modeling. Stroj. Cas. 2018, 68(3), 5–24. DOI: 10.2478/scjme-2018-0023.
   Google Scholar
• Jung Lee, M.; Min Cho, T.; Seock Kim, W.; Chai Lee, B.; Ju Lee, J. Determination of Cohesive Parameters for a Mixed-Mode Cohesive Zone Model. Int. J. Adhes. Adhes. 2010, 30(5), 322–328. DOI: 10.1016/j.ijadhadh.2009.10.005.
   Web of Science ®Google Scholar
• Safaei, S.; Ayatollahi, M. R.; Akhavan-Safar, A.; Moazzami, M.; da Silva, L. F. M. Effect of Residual Strains on the Static Strength of Dissimilar Single Lap Adhesive Joints. J. Adhes. 2021, 97(11), 1052–1071. DOI: 10.1080/00218464.2020.1727744.
   Web of Science ®Google Scholar
• Lai, Y. H.; Rakestraw, M. D.; Dillard, D. A. The Cracked Lap Shear Specimen Revisited—A Closed Form Solution. Int. J. Solids. Struct. 1996, 33(12), 1725–1743. DOI: 10.1016/0020-7683(95)00124-7.
   Web of Science ®Google Scholar
• Liu, Z.; Gibson, R. F.; Newaz, G. M. The Use of a Modified Mixed Mode Bending Test for Characterization of Mixed-Mode Fracture Behavior of Adhesively Bonded Metal Joints. J. Adhes. 2002, 78(3), 223–244. DOI: 10.1080/00218460210408.
   Web of Science ®Google Scholar
• Çitil, Ş. Experimental and Numerical Investigation of Adhesively Bonded Curved Lap Joints Under Three-Point Bending. Mechanika. 2018, 24(6), 824–832. DOI: 10.5755/j01.mech.24.6.22472.
   Web of Science ®Google Scholar
• Sawa, T.; Ichikawa, K.; Shin, Y.; Kobayashi, T. A Three-Dimensional Finite Element Stress Analysis and Strength Prediction of Stepped-Lap Adhesive Joints of Dissimilar Adherends Subjected to Bending Moments. Int. J. Adhes. Adhes. 2010, 30(5), 298–305. DOI: 10.1016/j.ijadhadh.2010.01.006.
   Web of Science ®Google Scholar
• Hülagü, B.; Acar, V.; Raci Aydın, M.; Aydın, O. A.; Gök, S.; Ünal, H. Y.; Pekbey, Y.; Akbulut, H. Experimental Modal Analysis of Graphene Nanoparticle-Reinforced Adhesively Bonded Double Strap Joints. J. Adhes. 2021, 97(12), 1107–1135. DOI: 10.1080/00218464.2020.1734793.
   Web of Science ®Google Scholar
• Nunes, S.; Campilho, R.; da Silva, F.; de Sousa, C. C. R. G.; Fernandes, T. A. B.; Banea, M. D.; da Silva, L. F. M. Comparative Failure Assessment of Single and Double Lap Joints with Varying Adhesive Systems. J. Adhes. 2016, 92(7–9), 610–634. DOI: 10.1080/00218464.2015.1103227.
   Web of Science ®Google Scholar
• Barbosa, N. G. C.; Campilho, R. D. S. G.; Silva, F. J. G.; Moreira, R. D. F. Comparison of Different Adhesively-Bonded Joint Types for Mechanical Structures. Appl. Adhes. Sci. 2018, 6(1), 1–19. DOI: 10.1186/s40563-018-0116-1.
   Google Scholar
• Adams, R. D.; Comyn, J.; Wake, W. C. Structural Adhesive Joints in Engineering; Chapman & Hall, 1997; p 359. https://research-information.bris.ac.uk/en/publications/structural-adhesive-joints-in-engineering.
   Google Scholar
• Maggiore, S.; Banea, M. D.; Stagnaro, P.; Luciano, G. A Review of Structural Adhesive Joints in Hybrid Joining Processes. Polymers. 2021, 13(22), 3961. DOI: 10.3390/polym13223961.
   PubMed Web of Science ®Google Scholar
• Campilho, R. D. S. G.; Madani, K.; Prakash, C. Advanced Characterization of Adhesive Joints and Adhesives. Mater. (Basel). 2022, 15(20), 15. DOI: 10.3390/ma15207347.
   Web of Science ®Google Scholar
• Jeevi, G.; Nayak, S. K.; Abdul Kader, M. Review on Adhesive Joints and Their Application in Hybrid Composite Structures. J. Adhes. Sci. Technol. 2019, 33(14), 1497–1520. DOI: 10.1080/01694243.2018.1543528.
   Web of Science ®Google Scholar
• Shahin, K.; Taheri, F. Analysis of Deformations and Stresses in Balanced and Unbalanced Adhesively Bonded Single-Strap Joints. Compos. Struct. 2007, 81(4), 511–524. DOI: 10.1016/j.compstruct.2006.09.014.
   Web of Science ®Google Scholar
• Kadioglu, F.; Demiral, M. Failure Behaviour of the Single Lap Joints of Angle-Plied Composites Under Three Point Bending Tests. J. Adhes. Sci. Technol. 2020, 34(5), 531–548. DOI: 10.1080/01694243.2019.1674101.
   Web of Science ®Google Scholar
• Yu, Y.; Ying, L.; Bin, H. W.; Hu, P.; Jia, X.-X.; Akhmet, G. Failure Analysis of Adhesively Bonded Steel Corrugated Sandwich Structures Under Three-Point Bending. Compos. Struct. 2018, 184, 256–268. DOI: 10.1016/j.compstruct.2017.10.011.
   Web of Science ®Google Scholar
• Grant, L. D. R.; Adams, R. D.; da Silva, L. F. M. Experimental and Numerical Analysis of Single Lap Joints for the Automotive Industry. Int. J. Adhes. Adhes. 2009, 29(4), 405–413. DOI: 10.1016/j.ijadhadh.2008.09.001.
   Web of Science ®Google Scholar
• Jeon, G.; Ha, D.; Park, Y.; Jeong, C. Three-Point Bending Properties of Hybrid Multi-Materials Using Adhesive Bonding Dependent on Strength Difference Between Steel and Aluminum. Mater. (Basel). 2022, 15(9), 15. DOI: 10.3390/ma15093328.
   Web of Science ®Google Scholar
• Genty, S.; Sauvage, J. B.; Tingaut, P.; Aufray, M. Experimental and Statistical Study of Three Adherence Tests for an Epoxy-Amine/aluminum Alloy System: Pull-Off, Single Lap Joint and Three-Point Bending Tests. Int. J. Adhes. Adhes. 2017, 79, 50–58. DOI: 10.1016/j.ijadhadh.2017.09.004.
   Web of Science ®Google Scholar
• Heidarpour, F.; Farahani, M.; Ghabezi, P. Experimental Investigation of the Effects of Adhesive Defects on the Single Lap Joint Strength. Int. J. Adhes. Adhes. 2018, 80, 128–132. DOI: 10.1016/j.ijadhadh.2017.08.005.
   Web of Science ®Google Scholar
• Katsiropoulos, C. V.; Chamos, A. N.; Tserpes, K. I.; Pantelakis, S. G. Fracture Toughness and Shear Behavior of Composite Bonded Joints Based on a Novel Aerospace Adhesive. Compos. Part B Eng. 2012, 43(2), 240–248. DOI: 10.1016/j.compositesb.2011.07.010.
   Web of Science ®Google Scholar
• Özbek, Ö.; Çakır, M. V. MWCNT and Nano-Silica Hybrids Effect on Mechanical and Fracture Characterization of Single Lap Joints of GFRP Plates. Int. J. Adhes. Adhes. 2022, 117, 117. DOI: 10.1016/j.ijadhadh.2022.103159.
   Web of Science ®Google Scholar
• Polini, W.; Corrado, A. Effects of adherends’ Misalignment on the 3-Point Flexural Strength of Single Lap Bonded Joints. Procedia CIRP. 2022, 114, 165–170. DOI: 10.1016/j.procir.2022.10.037.
   Google Scholar
• Prathuru, A. K.; Faisal, N. H.; Jihan, S.; Steel, J. A.; Njuguna, J. Stress Analysis at the Interface of Metal-To-Metal Adhesively Bonded Joints Subjected to 4-Point Bending: Finite Element Method. J. Adhes. 2017, 93(11), 855–878. DOI: 10.1080/00218464.2016.1172309.
   Web of Science ®Google Scholar
• Sauvage, J. B.; Aufray, M.; Jeandrau, J. P.; Chalandon, P.; Poquillon, D.; Nardin, M. Using the 3-Point Bending Method to Study Failure Initiation in Epoxide-Aluminum Joints. Int. J. Adhes. Adhes. 2017, 75, 181–189. DOI: 10.1016/j.ijadhadh.2017.03.011.
   Web of Science ®Google Scholar
• Yan, C.; Mai, Y.-W.; Ye, L. Effect of Bond Thickness on Fracture Behaviour in Adhesive Joints. J. Adhes. 2001, 75(1), 27–44.
   Web of Science ®Google Scholar
• Kinloch, A. J. Adhesives in Engineering. Proc Inst Mech Eng Part G J Aerosp Eng. SAGE Publications: London, England, UK, 1997; p 307–335.
   Google Scholar
• Andrews, E. H.; Kinloch, A. J. Mechanics of Adhesive Failure. II. Proc R Soc London A Math Phys Sci. The Royal Society, 1973; p A332401–414. DOI: 10.1098/rspa.1973.0033.
   Google Scholar
• Kinloch, A. J. Adhesion and Adhesives; Springer Netherlands: Dordrecht, 1987.
   Google Scholar
• Li, G.; Li, C. An Analytical Analysis of Energy Release Rate in Bonded Composite Joints in a Mode I Condition. Compos. Part B Eng. 2013, 44(1), 704–713. DOI: 10.1016/j.compositesb.2012.01.082.
   Web of Science ®Google Scholar
• Zeinedini, A. A Novel Fixture for Mixed Mode I/II/III Fracture Testing of Brittle Materials. Fatigue Fract. Eng. Mater. Struct. 2019, 42(4), 838–853. DOI: 10.1111/ffe.12955.
   Web of Science ®Google Scholar
• Akhavan-Safar, A.; Ayatollahi, M. R.; Bahreinian, S. A.; da Silva, L. F. M. Application of Adhesively Bonded Single Lap Joints for Fracture Assessment of Adhesive Materials Application of Adhesively Bonded Single Lap Joints for Fracture Assessment of Adhesive Materials. J. Adhes. 2017, 95(1), 1–22. DOI: 10.1080/00218464.2017.1329656.
   Web of Science ®Google Scholar
• Ezzine, M. C.; Amiri, A.; Tarfaoui, M. Experimental and Numerical Investigation of the Fracture Behavior of Adhesive Shear Tests Single Lap Joints. J. Brazilian Soc. Mech. Sci. Eng. 2018, 40(8), 1–11. DOI: 10.1007/s40430-018-1303-5.
   Web of Science ®Google Scholar
• Choupani, N. Characterization of Fracture in Adhesively Bonded Double Lap Joints. Int. J. Adhes. Adhes. 2009, 29(8), 761–773. DOI: 10.1016/j.ijadhadh.2009.05.002.
   Web of Science ®Google Scholar
• Kadioglu, F. Mechanical Behaviour of Adhesively Single Lap Joint Under Buckling Conditions. Chinese J. Aeronaut. 2021, 34(2), 154–164. DOI: 10.1016/j.cja.2020.06.010.
   Web of Science ®Google Scholar
• Cui, J.; Wang, S.; Wang, S.; Chen, S.; Li, G. Strength and Failure Analysis of Adhesive Single Lap Joints Under Shear Loading: Effects of Surface Morphologies and Overlap Zone Parameters. J. Manuf. Process. 2020, 56, 238–247. DOI: 10.1016/j.jmapro.2020.04.042.
   Web of Science ®Google Scholar
• Atahan, M. G.; Apalak, M. K. Loading-Rate Effect on Tensile and Bending Strength of 3D-Printed Polylactic Acid Adhesively Bonded Joints. J. Adhes. Sci. Technol. 2021, 36(3), 317–344. DOI: 10.1080/01694243.2021.1922022.
   Web of Science ®Google Scholar
• Dassault systemes. 6.13 Documentation (Abaqus), 2013. Abaqus User’s Guid. 2013. p. 1138.
   Google Scholar
• Topac, O. T.; Gozluklu, B.; Gurses, E.; Coker, D. Experimental and Computational Study of the Damage Process in CFRP Composite Beams Under Low-Velocity Impact. Compos. Part A Appl. Sci. Manuf. 2017, 92, 167–182. DOI: 10.1016/j.compositesa.2016.06.023.
   Web of Science ®Google Scholar
• Lopes, C. S.; Camanho, P. P.; Gürdal, Z.; Maimí, P.; González, E. V. Low-Velocity Impact Damage on Dispersed Stacking Sequence Laminates. Part II: Numerical Simulations. Compos. Sci. Technol. 2009, 7–8(7–8), 937–947. DOI: 10.1016/j.compscitech.2009.02.015.
   Google Scholar
• dos Reis MQ; Carbas, R. J. C.; Marques, E. A. S.; dos Reis, M. Q.; da Silva, L. Numerical Modelling of Functionally Graded Adherends. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 2021, 235(3), 508–517. DOI: 10.1177/0954406220967695.
   Web of Science ®Google Scholar
• Chaves, F. J. P.; Da Silva, L. F. M.; De Moura, M. F. S. F.; Dillard, D. A.; Esteves, V. H. C. Fracture Mechanics Tests in Adhesively Bonded Joints: A Literature Review. J. Adhes. 2014, 90(12), 955–992. DOI: 10.1080/00218464.2013.859075.
   Web of Science ®Google Scholar
• Ortiz, M.; Pandolfi, A. Finite-Deformation Irreversible Cohesive Elements for Three-Dimensional Crack-Propagation Analysis. Int. J. Numer. Methods Eng. 1999, 44(9), 1267–1282. DOI: 10.1002/(SICI)1097-0207(19990330)44:9<1267:AID-NME486>3.0.CO;2-7.
   Web of Science ®Google Scholar
• Liljedahl, C. D. M.; Crocombe, A. D.; Wahab, M. A.; Ashcroft, I. A. Damage Modelling of Adhesively Bonded Joints. Int. J. Fract. 2006, 141(1–2), 147–161. DOI: 10.1007/s10704-006-0072-9.
   Web of Science ®Google Scholar
• Martins, J. L. C. H. CFRP Joints with Hybrid Laminates Metal-Carbon Fibre. Faculty of Engineering FEUP - Dissertation, Open Repository of the University of Porto FEUP, 2018. https://repositorio-aberto.up.pt/handle/10216/111847.
   Google Scholar
• Dumbrava, R. C. Optimization of CFRP Joints with Fibre Metal Laminates. Faculty of Engineering FEUP - Dissertation, Open Repository of the University of Porto FEUP, 2018.
   Google Scholar
• Benzeggagh, M. L.; Kenane, M. Measurement of Mixed-Mode Delamination Fracture Toughness of Unidirectional Glass/Epoxy Composites with Mixed-Mode Bending Apparatus. Compos. Sci. Technol. 1996, 56(4), 439–449. DOI: 10.1016/0266-3538(96)00005-X.
   Web of Science ®Google Scholar
• Eghbalpoor, R.; Akhavan-Safar, A.; Jalali, S.; Ayatollahi, M. R.; da Silva, L. F. M. A Progressive Damage Model to Predict the Shear and Mixed-Mode Low-Cycle Impact Fatigue Life of Adhesive Joints Using Cohesive Elements. Finite. Elem. Anal. Des. 2023, 216, 103894. DOI: 10.1016/j.finel.2022.103894.
   Web of Science ®Google Scholar
• Campilho, R. D. S. G.; Banea, M. D.; Neto, J. A. B. P.; da Silva, L. F. M. Modelling of Single Lap Joints Using Cohesive Zone Models: Effect of the Cohesive Parameters on the Output of the Simulations. J. Adhes. 2012, 88(4–6), 513–533. DOI: 10.1080/00218464.2012.660834.
   Web of Science ®Google Scholar
• Demiral, M.; Kadioglu, F. Failure Behaviour of the Adhesive Layer and Angle Ply Composite Adherends in Single Lap Joints: A Numerical Study. Int. J. Adhes. Adhes. 2018, 87, 181–190. DOI: 10.1016/j.ijadhadh.2018.10.010.
   Web of Science ®Google Scholar
• Kawashita, L. F.; Kinloch, A. J.; Moore, D. R.; Williams, J. G. The Influence of Bond Line Thickness and Peel Arm Thickness on Adhesive Fracture Toughness of Rubber Toughened Epoxy–Aluminium Alloy Laminates. Int. J. Adhes. Adhes. 2008, 28(4–5), 199–210. DOI: 10.1016/j.ijadhadh.2007.05.005.
   Web of Science ®Google Scholar
• Davies, P.; Sohier, L.; Cognard, J. Y.; Bourmaud, A.; Choqueuse, D.; Rinnert, E.; Créac’hcadec, R. Influence of Adhesive Bond Line Thickness on Joint Strength. Int. J. Adhes. Adhes. 2009, 29(7), 724–736. DOI: 10.1016/j.ijadhadh.2009.03.002.
   Web of Science ®Google Scholar
• Qian, H.; Sun, C. T. Effect of Bondline Thickness on Mode I Fracture in Adhesive Joints. Collect Tech Pap - AIAA/ASME/ASCE/AHS/ASC Struct Struct Dyn Mater Conf, 49th AIAA/ASME/ASCE/AHS/ASC Struct, Struct Dyn and Mate Conf, 16th AIAA/ASME/AHS Adaptive Struct Conf, 2008. DOI: 10.2514/6.2008-1845.
   Google Scholar
• Kadioglu, F.; Adams, R. Non-Linear Analysis of a Ductile Adhesive in the Single Lap Joint Under Tensile Loading. J. Reinf. Plast. Compos. 2009, 28(23), 2831–2838. DOI: 10.1177/0731684408093455.
   Web of Science ®Google Scholar
• Gustafson, P. A.; Waas, A. M. The Influence of Adhesive Constitutive Parameters in Cohesive Zone Finite Element Models of Adhesively Bonded Joints. Int. J. Solids. Struct. 2009, 46(10), 2201–2215. DOI: 10.1016/j.ijsolstr.2008.11.016.
   Web of Science ®Google Scholar
• Carbas, R. J. C.; Marques, E. A. S.; da Silva, L. F. M. The Influence of Epoxy Adhesive Toughness on the Strength of Hybrid Laminate Adhesive Joints. Appl. Adhes. Sci. 2021, 9(1), 1–14. DOI: 10.1186/s40563-020-00132-5.
   Google Scholar
• Xu, W.; Wei, Y. Influence of Adhesive Thickness on Local Interface Fracture and Overall Strength of Metallic Adhesive Bonding Structures. Int. J. Adhes. Adhes. 2013, 40, 158–167. DOI: 10.1016/j.ijadhadh.2012.07.012.
   Web of Science ®Google Scholar