Performance Improvement of Z-Type Manifold Microchannel Heat Sink with Novel Fin-Arrangements

References

• D. B. Tuckerman and R. F. W. Pease, “High-performance heat sinking for VLSI,” IEEE Electron Device Lett., vol. 2, no. 5, pp. 126–129, May 1981. DOI: 10.1109/EDL.1981.25367.
   Web of Science ®Google Scholar
• Y. Yang et al., “Embedded microfluidic cooling with compact double H type manifold microchannels for large-area high-power chips,” Int. J. Heat Mass Transf., vol. 197, pp. 123340, Nov. 2022. DOI: 10.1016/j.ijheatmasstransfer.2022.123340.
   Web of Science ®Google Scholar
• L. Chen, D. Deng, Q. Ma, Y. Yao and X. Xu, “Performance evaluation of high concentration photovoltaic cells cooled by microchannels heat sink with serpentine reentrant microchannels,” Appl. Energy, vol. 309, pp. 118478, Mar. 2022. DOI: 10.1016/j.apenergy.2021.118478.
   Web of Science ®Google Scholar
• Z. Guo, Y. Wu, Y. Sun, Y. Wang and G. Ding, “Microchannel heat sink with high thermal conductivity path for diode partially end-pumped slab laser,” J. Phys. Conf. Ser., vol. 1739, no. 1, pp. 012033, Jan. 2021. DOI: 10.1088/1742-6596/1739/1/012033.
   Google Scholar
• G. Hetsroni, A. Mosyak, Z. Segal and G. Ziskind, “A uniform temperature heat sink for cooling of electronic devices,” Int. J. Heat Mass Transf., vol. 45, no. 16, pp. 3275–3286, Jul. 2022. DOI: 10.1016/S0017-9310(02)00048-0.
   Google Scholar
• X. Huang, W. Yang, T. Ming, W. Shen and X. Yu, “Heat transfer enhancement on a microchannel heat sink with impinging jets and dimples,” Int. J. Heat Mass Transf., vol. 112, pp. 113–124, Sep. 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.04.078.
   Web of Science ®Google Scholar
• D. Gupta, P. Saha and S. Roy, “Computational analysis of perforation effect on the thermo-hydraulic performance of micro pin-fin heat sink,” Int. J. Therm. Sci., vol. 163, pp. 106857, May 2021. DOI: 10.1016/j.ijthermalsci.2021.106857.
   Web of Science ®Google Scholar
• S. S. Sehgal, K. Murugesan and S. K. Mohapatra, “Experimental investigation of the effect of flow arrangements on the performance of a micro-channel heat sink,” Exp. Heat Transf., vol. 24, no. 3, pp. 215–233, 2011. DOI: 10.1080/08916152.2010.523808.
   Web of Science ®Google Scholar
• D. Bogojevic et al., “Investigation of flow distribution in microchannels heat sinks,” Heat Transf. Eng., vol. 30, no. 13, pp. 1049–1057, 2009. DOI: 10.1080/01457630902921287.
   Web of Science ®Google Scholar
• H. Shi, T. Ma, W. Chu and Q. Wang, “Optimization of inlet part of a microchannel ceramic heat exchanger using surrogate model coupled with genetic algorithm,” Energ. Convers. Manage, vol. 149, pp. 988–996, Oct. 2017. DOI: 10.1016/j.enconman.2017.04.035.
   Web of Science ®Google Scholar
• C. Pistoresi, Y. Fan, J. Aubril and L. Luo, “Fluid flow characteristics of a multi-scale fluidic network,” Chem. Eng. Process, vol. 123, pp. 67–81, Jan. 2018. DOI: 10.1016/j.cep.2017.10.014.
   Web of Science ®Google Scholar
• R. Kumar, G. Singh and D. Mikielewicz, “A New approach for the mitigating of flow maldistribution in parallel microchannel heat sink," ASME J. Heat Transf., vol. 140, no. 7, pp. 072401, Jul. 2018. DOI: 10.1115/1.4038830.
   Web of Science ®Google Scholar
• G. M. Harpole and J. E. Eninger, “Micro-channel heat exchanger optimization,” presented at the 1991 Proc. Seventh IEEE Semicon. Therm. Meas. Manage. Symp., Phoenix, AZ, pp. 59–63. Feb. 1991. DOI: 10.1109/STHERM.1991.152913.
   Google Scholar
• K. W. Jung et al., “Embedded cooling with 3D manifold for vehicle power electronics application: single-phase thermal-fluid performance,” Int. J. Heat Mass Transf., vol. 130, pp. 1108–1119, 2019. DOI: 10.1016/j.ijheatmasstransfer.2018.10.108.
   Web of Science ®Google Scholar
• G. Narendran, N. Gnanasekaran and D. A. Perumal, “Experimental investigation on heat spreader integrated microchannel using graphene oxide nanofluid,” Heat Transf. Eng., vol. 41, no. 14, pp. 1252–1274, 2020. DOI: 10.1080/01457632.2019.1637136.
   Web of Science ®Google Scholar
• D. C. Deisenroth et al., “Review of heat exchangers enabled by polymer and polymer composite additive manufacturing,” Heat Transf. Eng., vol. 39, no. 19, pp. 1648–1664, 2018. DOI: 10.1080/01457632.2017.1384280.
   Web of Science ®Google Scholar
• M. Mortazavi, S. A. Niknam, M. Heidari and R. C. Clemente, “Experimental characterization of additively manufactured metallic heat exchangers,” IEEE Trans. Compon. Packag. Manufact. Technol., vol. 11, no. 12, pp. 2089–2101, Dec. 2021. DOI: 10.1109/TCPMT.2021.3114285.
   Web of Science ®Google Scholar
• K. P. Drummond et al., “A hierarchical manifold microchannel heat sink array for high-heat-flux two-phase cooling of electronics,” Int. J. Heat Mass Transf., vol. 117, pp. 319–330, Feb. 2018. DOI: 10.1016/j.ijheatmasstransfer.2017.10.015.
   Web of Science ®Google Scholar
• N. Gilmore, V. Timchenko and C. Menictas, “Open manifold microchannel heat sink for high heat flux electronic cooling with a reduced pressure drop,” Int. J. Heat Mass Transf., vol. 163, pp. 120395, Dec. 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.120395.
   Web of Science ®Google Scholar
• Y. Pan, R. Zhao, Y. Nian and W. Cheng, “Study on the flow and heat transfer characteristics of pin-fin manifold microchannel heat sink,” Int. J. Heat Mass Transf., vol. 183, pp. 122052, Feb. 2022. DOI: 10.1016/j.ijheatmasstransfer.2021.122052.
   Web of Science ®Google Scholar
• K. Tang et al., “Simulation and optimization of thermal performance in diverging/converging manifold microchannel heat sink,” Int. J. Heat Mass Transf., vol. 200, pp. 123495, Jan. 2023. DOI: 10.1016/j.ijheatmasstransfer.2022.123495.
   Web of Science ®Google Scholar
• W. Escher, B. Michel and D. Poulikakos, “A novel high performance, ultra thin heat sink for electronics,” Int. J. Heat Fluid Flow, vol. 31, no. 4, pp. 586–598, Aug. 2010. DOI: 10.1016/j.ijheatfluidflow.2010.03.001.
   Web of Science ®Google Scholar
• W. Tang, L.-C. Sun, H.-T. Liu and M. Du, “Improvements in performance of a self-similarity heat sink through structure modification,” Heat Transf. Eng., vol. 41, no. 17, pp. 1512–1530, 2020. DOI: 10.1080/01457632.2019.1649939.
   Web of Science ®Google Scholar
• F. Zhou, Y. Liu, Y. Liu, S. N. Joshi and E. M. Dede, “Modular design for a single-phase manifold mini/microchannel cold plate," ASME J. Thermal Sci. Eng. Appl., vol. 8, no. 2, pp. 021010, Jun. 2016. DOI: 10.1115/1.4031932.
   Web of Science ®Google Scholar
• Y. Lin et al., “Single-phase and two-phase flow and heat transfer in microchannel heat sink with various manifold arrangements,” Int. J. Heat Mass Transf., vol. 171, pp. 121118, Jun. 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121118.
   Web of Science ®Google Scholar
• J. Zhou et al., “Flow thermohydraulic characterization of hierarchical-manifold microchannel heat sink with uniform flow distribution,” Appl. Therm. Eng., vol. 198, pp. 117510, Nov. 2021. DOI: 10.1016/j.applthermaleng.2021.117510.
   Web of Science ®Google Scholar
• R. Mandel, A. Shooshtari and M. Ohadi, “Effect of manifold flow configuration on two-phase ultra-high flux cooling,” Numer. Heat Tr. A Appl., vol. 74, no. 8, pp. 1425–1442, 2018. DOI: 10.1080/10407782.2018.1538297.
   Web of Science ®Google Scholar
• G. Narendran, B. Mallikarjuna, B. K. Nagesha and N. Gnanasekaran, “Experimental investigation on additive manufactured single and curved double layered microchannel heat sink with nanofluids,” Heat Mass Transf., vol. 59, no. 7, pp. 1311–1332, Jul. 2023. DOI: 10.1007/s00231-022-03336-6.
   Web of Science ®Google Scholar
• G. Narendran and N. Gnanasekaran, “Investigation on novel inertial minichannel to mitigate maldistribution induced high temperature zones,” Energ. Convers. Manage, vol. 271, pp. 116300, Nov. 2022. DOI: 10.1016/j.enconman.2022.116300.
   Web of Science ®Google Scholar
• W. Li et al., “Optimization of Manifold Mmicrochannel Heat Sink Based on Equivalent Resistance Model,” presented at the 2020 19th IEEE Inters. Conf. Therm. Thermom. Phenom. Electron. Syst., Orlando, FL, pp. 497–500. Jul. 2020. DOI: 10.1109/ITherm45881.2020.9190529.
   Google Scholar
• R. S. Andhare, A. Shooshtari, S. V. Dessiatoun and M. M. Ohadi, “Heat transfer and pressure drop characteristics of a flat plate manifold microchannel heat exchanger in counter flow configuration,” Appl. Therm. Eng., vol. 96, pp. 178–189, Mar. 2016. DOI: 10.1016/j.applthermaleng.2015.10.133.
   Web of Science ®Google Scholar
• C. Chen, F. Li, X. Wang, J. Zhang and G. Xin, “Improvement of flow and heat transfer performance of manifold microchannel with porous fins,” Appl. Therm. Eng., vol. 206, pp. 118129, Apr. 2022. DOI: 10.1016/j.applthermaleng.2022.118129.
   Web of Science ®Google Scholar
• P. K. Kundu, I. M. Cohen and D. R. Dowling, Fluid Mechanics, 5th ed., Cambridge, MA: Academic Press, 2012.
   Google Scholar
• Y.-H. Pan, R. Zhao, X.-H. Fan, Y.-L. Nian and W.-L. Cheng, “Study on the effect of varying channel aspect ratio on heat transfer performance of manifold microchannel heat sink,” Int. J. Heat Mass Transf., vol. 163, pp. 120461, Dec. 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.120461.
   Web of Science ®Google Scholar
• B. Chen, C. Zhang, Y. Xu and Z. Chen, “Hydrodynamic and thermal performance of in-line strip-fin manifold microchannel heat sink,” Int. J. Heat Mass Transf., vol. 209, pp. 124131, Aug. 2023. DOI: 10.1016/j.ijheatmasstransfer.2023.124131.
   Web of Science ®Google Scholar
• S. G. Kandlikar and W. J. Grande, “Evaluation of single-phase flow in microchannels for high flux chip cooling: thermohydraulic performance enhancement and fabrication technology,” Heat Transf. Eng., vol. 25, no. 8, pp. 5–16, 2004. DOI: 10.1080/01457630490519772.
   Web of Science ®Google Scholar