85
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Numerical modeling of the two-dimensional free and impinging jets with solid and erosion bed using FLOW-3D

, , &
Pages 205-217 | Received 08 Aug 2023, Accepted 08 Jan 2024, Published online: 31 Jan 2024

References

  • Beltaos, S., and Rajaratnam, N. (1974). “Impinging circular turbulent jets.” J. Hydr. Div., 100(10), 1313–1328. 10.1061/JYCEAJ.0004072.
  • Benseghier, Z., Luu, L.-H., Delenne, J.-Y., Bonelli, S., and Philippe, P. (2020). “Relevance of free jet model for soil erosion by impinging jets.” J. Hydraul. Eng., 146(1), 04019047.
  • Bickley, W. (1937). “The plane jet.” London Edinburgh Dublin Philos. Mag. J. Sci, 23(156), 727–731. 10.1080/14786443708561847.
  • Cuéllar, P., Benseghier, Z., Luu, L.-H., Bonelli, S., Delenne, J.-Y., Radja, F., and Philippe, P. (2017). “Numerical insight into the micromechanics of jet erosion of a cohesive granular material.” EPJ Web of Conferences, Presented at the Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media, July 3-7, Montpellier, France, 15017.
  • Cuéllar, P., Philippe, P., Bonelli, S., Benahmed, N., Brunier-Coulin, F., Ngoma, J., Delenne, J.-Y., and Radjai, F. (2015). “Micromechanical analysis of the surface erosion of a cohesive soil by means of a coupled LBM-DEM model.” In Proceedings of the 4th International Conference on Particle-Based Methods Fundamentals and Applications (pp. 1–15). Barcelona, Spain: International Center for Numerical Methods in Engineering (CIMNE).
  • Dutta, P., Chattopadhyay, H., and Bhattacharyya, S. (2023). Flow and heat transfer over a moving surface due to impinging annular jets, 10.1007/978-981-19-6270-7_51.
  • Fan, W., Bao, W., Cai, Y., Xiao, C., Zhang, Z., Pan, Y., Chen, Y., and Liu, S. (2020). “Experimental study on the effects of a vertical jet impinging on soft bottom sediments.” Sustain. (Switzerland), 12. 3775.
  • Fernandez Luque, R., and Van Beek, R. (1976). “Erosion and transport of bed-load sediment.” J. Hydraul. Res., 14(2), 127–144. 10.1080/00221687609499677.
  • FLOW-3D User Manual (Version 9.3). (2008). Flow science inc. Santa Fe, New Mexico, USA.
  • Ghaneeizad, S.M., Atkinson, J.F., and Bennett, S.J. (2015). “Effect of flow confinement on the hydrodynamics of circular impinging jets: Implications for erosion assessment.” Env. Fluid. Mech., 15(1), 1–25.
  • Hanson, G., and Cook, K. (2004). “Apparatus, test procedures, and analytical methods to measure soil erodibility in situ.” Appl. Eng. Agric, 20(4), 455.
  • Kuang, S., LaMarche, C., Curtis, J., and Yu, A. (2013). “Discrete particle simulation of jet-induced cratering of a granular bed.” Pow. Technol., 239. 319–336.
  • Liang, H., Tang, C., Xie, C., Hu, R., and Yuan, H. (2023). “A numerical simulation of high-Reynolds-number opposed impinging wall water jets in a limited field.” AIP Adv., 13(11). 10.1063/5.0168636.
  • Li, G., Li, P., and Li, X. (2022). “Numerical optimization of oblique cut bucket and its application in ski jump of Shiziya dam.” ISH J. Hydraul. Eng., 28(10), 380–389. 10.1080/09715010.2019.1685915.
  • Mastbergen, D.R., and Van Den Berg, J.H. (2003). “Breaching in fine sands and the generation of sustained turbidity currents in submarine canyons.” Sedimentology, 50(4), 625–637. 10.1046/j.1365-3091.2003.00554.x.
  • Mastorakof, E. (2010). “Turbulence and vortex dynamics”, part II: Turbulence, lecture notes, Cambridge University Engineering Department, Cambridge, UK.
  • Pagliara, S., Amidei, M., and Wong, F. (2008). “Hydraulics of 3D plunge pool scour.” J. Hydraul. Eng., 134. 1275–1284.
  • Pagliara, S., Wong, F., and Unger, J. (2008). “Temporal evolution of plunge pool scour.” J. Hydraul. Eng., 134. 1630–1638.
  • Rajaratnam, N. (1976). “Turbulent jets.” In Developments in water science, J. Bear Ed., Elsevier, Amsterdam, Netherlands, 1–304.
  • Ribberink, J. (1998). “Bed-load transport for steady flows and unsteady oscillatory flows.” Coastal Engineering - COAST ENG, 34(1–2), 59–82. 10.1016/S0378-3839(98)00013-1.
  • Schlichting, H. (1960). Boundary layer theory., 4th, New York, McGraw-Hill.
  • Shields, A. (1936). “Anwendung der Ahnlichkeitsmechanik und der Turbulenzforschung auf die Geschiebebewegung. [In German].” In Preussische Versuchsanstalt für Wasserbau und Schiffbau, Heft 26, eds., W.P. Ott and J.C. van Uchelen, Pasadena, CA, California Institute of Technology, 1–26.
  • Streeter, V.L., and Wylie, E.B. (1975). Fluid mechanics., 6th, New York, McGraw-Hill.
  • Weidner, K., Petrie, J., and Diplas, P. (2012). “Numerical simulation of jet test and associated soil erosion.” In: The 6th International Conference on Scour and Erosion, Paris, France, 609–616.
  • Zhang, K., Petrie, J., Ham, S., Muhunthan, B., and Kwon, T. (2019). Numerical analysis at the articulate scale of sand erosion under impinging jet, Springer International Publishing AG, Advancements on Sustainable Civil Infrastructures, Cham, Switzerland.
  • Zheng, Q. (2017). “SAR detection of ocean processes and bottom topography.” Journal Of Reference Module In Earth Systems And Environmental Sciences, 10.1016/B978-12-409548-9.10403-8.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.