Determination of response modification coefficient of SPSW in RC frame using plastic design method

References

• ACI Committee, American Concrete Institute, & International Organization for Standardization. 2014. Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary. Michigan: American Concrete Institute.
   Google Scholar
• AISC, A. A. 2010. “Seismic Provisions for Structural Steel Buildings”. Chicago (IL): American Institute of Steel Construction.
   Google Scholar
• Alinia, M. M., and M. Dastfan. 2006. “Behaviour of Thin Steel Plate Shear Walls Regarding Frame Members.” Journal of Constructional Steel Research 62 (7): 730–738. https://doi.org/10.1016/j.jcsr.2005.11.007.
   Web of Science ®Google Scholar
• ASCE 7. 2010. Minimum Design Loads for Buildings and Other Structures. Reston, Virginia, USA: American Society Of Civil Engineers.
   Google Scholar
• ATC. 1995. Structural Response Modification Factors ATC-19. Redwood City, California: Applied Technology Council.
   Google Scholar
• Azandariani, M. G., M. Gholhaki, and M. A. Kafi. 2021. “Hysteresis Finite Element Model for Evaluation of Cyclic Behavior and Performance of Steel Plate Shear Walls (SPSWs).” Structures 29: 30–47. https://doi.org/10.1016/j.istruc.2020.11.009.
   Web of Science ®Google Scholar
• Berman, J., and M. Bruneau. 2003. “Plastic Analysis and Design of Steel Plate Shear Walls.” Journal of Structural Engineering 129 (11): 1448–1456. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:11(1448).
   Web of Science ®Google Scholar
• Bhowmick, A. K., G. Y. Grondin, and R. G. Driver. 2014. “Nonlinear Seismic Analysis of Perforated Steel Plate Shear Walls.” Journal of Constructional Steel Research 94:103–113. https://doi.org/10.1016/j.jcsr.2013.11.006.
   Web of Science ®Google Scholar
• Caccese, V., M. Elgaaly, and R. Chen. 1993. “Experimental Study of Thin Steel-Plate Shear Walls Under Cyclic Load.” Journal of Structural Engineering 119 (2): 573–587. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:2(573).
   Web of Science ®Google Scholar
• Chao, S. H., and S. C. Goel. 2008. “Performance-based plastic design of special truss moment frames.” Engineering Journal 45 (2): 127–150.
   Google Scholar
• Chao, S. H., S. C. Goel, and S. S. Lee. 2007. “A Seismic Design Lateral Force Distribution Based on Inelastic State of Structures.” Earthquake Spectra 23 (3): 547–569. https://doi.org/10.1193/1.2753549.
   Web of Science ®Google Scholar
• Choi, I. R., and H. G. Park. 2010. “Cyclic Loading Test for Reinforced Concrete Frame with Thin Steel Infill Plate.” Journal of Structural Engineering 137 (6): 654–664. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000317.
   Web of Science ®Google Scholar
• CSA, C. 2001. “CSA S16-01.” In Limit States Design of Steel Structures, Canadian Standards Association. Willowdale, Ontario, Canada.
   Google Scholar
• Dalal, S. P., and P. Dalal. 2021. ”Strength, Deformation and Fragility assessment of Reinforced Concrete Moment Resisting frame designed by Force Based Design and the Performance Based Plastic Design method for Seismic loads.”Structures 29: 1154–1164. https://doi.org/10.1016/j.istruc.2020.11.029.
   Web of Science ®Google Scholar
• Dasgupta, P., S. C. Goel, G. Parra-Montesinos, and T. C. Tsai (2004, August). Performance-Based Seismic Design and Behavior of a Composite Buckling Restrained Braced Frame. In Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, BC, 1–6).
   Google Scholar
• Elgaaly, M. 1998. “Thin Steel Plate Shear Walls Behavior and Analysis.” Thin-Walled Structures 32 (1): 151–180. https://doi.org/10.1016/S0263-8231(98)00031-7.
   Web of Science ®Google Scholar
• Fajfar, P., and H. Krawinkler (2004, June). Performance-Based Seismic Design Concepts and Implementation. In Proceedings of the International Workshop, Bled, Slovenia 28: 2004–2005.‏
   Google Scholar
• FEMA. 2006. Improvement of Nonlinear Static Seismic Analysis Procedures. FEMA 440. Washington D.C., USA: Federal Emergency Management Agency.
   Google Scholar
• Gorji, M. S., and J. R. Cheng. 2018. “Plastic Analysis and Performance-Based Design of Coupled Steel Plate Shear Walls.” Engineering Structures 166:472–484. https://doi.org/10.1016/j.engstruct.2018.03.048.
   Web of Science ®Google Scholar
• Habashi, H. R., and M. M. Alinia. 2010. “Characteristics of the Wall–Frame Interaction in Steel Plate Shear Walls.” Journal of Constructional Steel Research 66 (2): 150–158. https://doi.org/10.1016/j.jcsr.2009.09.004.
   Web of Science ®Google Scholar
• Krawinkler, H. E. L. M. U. T., and A. A. Nassar. 1992. ”Seismic Design Based on Ductility and Cumulative Damage Demands and Capacities. “ Nonlinear Seismic Analysis and Design of Reinforced Concrete Buildings, 23–39.
   Google Scholar
• Lee, S. S., and S. C. Goel (2001). Performance-Based Design of Steel Moment Frames Using Target Drift and Yield Mechanism, Research Report No. UMCEE 01–17, Dept of Civil and Environmental Engineering, University of Michigan, Ann Arbor, USA.
   Google Scholar
• Leelataviwat, S., S. C. Goel, and B. Stojadinovic′. 1999. “Toward Performance-Based Seismic Design of Structures.” Earthquake Spectra 15 (3): 435–461. https://doi.org/10.1193/1.1586052.
   Google Scholar
• Liao, W. C., and S. C. Goel. 2014. “Performance-Based Seismic Design of RC SMF Using Target Drift and Yield Mechanism as Performance Criteria.” Advances in Structural Engineering 17 (4): 529–542. https://doi.org/10.1260/1369-4332.17.4.529.
   Web of Science ®Google Scholar
• McKenna, F., G. L. Fenves, B. Jeremic, and M. Scott (2015). Open System for Earthquake Engineering Simulation, 2000. http://opensees.berkeley.edu.May2008.
   Google Scholar
• Meghdadaian, M., and M. Ghalehnovi. 2019. “Improving Seismic Performance of Composite Steel Plate Shear Walls Containing Openings.” Journal of Building Engineering 21: 336–342.‏ https://doi.org/10.1016/j.jobe.2018.11.001.
   Web of Science ®Google Scholar
• Mehmandousti, A. M. A., and A. Jalaeefar. 2023. ”Effect of Seismic Sequences on Behavior of Mid-Rise Steel Moment-Resisting Frames Equipped with Fluid Viscous Dampers.“ Structures 54: 657–668. http://doi.org/10.1016/j.istruc.2023.05.108.
   Web of Science ®Google Scholar
• Merter, O., and T. Ucar. 2017. “Energy-Based Design Base Shear for RC Frames Considering Global Failure Mechanism and Reduced Hysteretic Behavior.” Structural Engineering and Mechanics 63 (1): 23–35.‏.
   Web of Science ®Google Scholar
• Merter, O., and T. Ucar. 2021. “An Energy-Based Approach to Determine the Yield Force Coefficient of RC Frame Structures.” Earthquakes and Structures 21 (1): 43–55.‏.
   Web of Science ®Google Scholar
• Miranda, E., and V. V. Bertero. 1994. “Evaluation of Strength Reduction Factors for Earthquake-Resistant Design.” Earthquake Spectra 10 (2): 357–379. https://doi.org/10.1193/1.1585778.
   Google Scholar
• Moradnezhad, B., M. Oghabi, M. TahamouliRoudsari, and M. Movahednia. 2022. ”A Novel Practical Truss-Based Approach for Evaluation the Non-Linear Behavior of Steel Plate Shear Walls.” Structures 40: 370–385. http://doi.org/10.1016/j.istruc.2022.03.076.
   Web of Science ®Google Scholar
• Munesi, A., M. Gholhaki, M. K. Sharbatdar, and V. Pachideh. 2023. “Study on the gap width between the steel plate and concrete panels on behavior of the buckling‐restrained steel plate shear walls.” Structural Concrete 24 (5): 5872–5886. https://doi.org/10.1002/suco.202200879.
   Web of Science ®Google Scholar
• Newmark, N. M., and W. J. Hall. 1982. Earthquake Spectra and Design. USA: Earthquake Engineering Research Institute.
   Google Scholar
• Sabouri-Ghomi, S., C. E. Ventura, and M. H. Kharrazi. 2005. “Shear Analysis and Design of Ductile Steel Plate Walls.” Journal of Structural Engineering 131 (6): 878–889. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:6(878).
   Web of Science ®Google Scholar
• Sahoo, D. R., and S. H. Chao. 2010. “Performance-Based Plastic Design Method for Buckling-Restrained Braced Frames.” Engineering Structures 32 (9): 2950–2958. https://doi.org/10.1016/j.engstruct.2010.05.014.
   Web of Science ®Google Scholar
• Shekastehband, B., A. A. Azaraxsh, H. Showkati, and A. Pavir. 2017. “Behavior of Semi-Supported Steel Shear Walls: Experimental and Numerical Simulations.” Engineering Structures 135: 161–176. https://doi.org/10.1016/j.engstruct.2017.01.004.
   Web of Science ®Google Scholar
• Stafford Smith, B., and A. Coull. 1991. Tall Building Structures: Analysis and Design. New York: Wiley.
   Google Scholar
• Thorburn, L. J., G. L. Kulak, and C. J. Montgomery. 1983. Analysis and Design of Steel Shear Wall system. Structural Engineering Rep. No. 107. Alberta, Canada: Dept. of Civil Engineering, Univ. of Alberta.
   Google Scholar
• Uang, C. M. 1991. “Establishing R (Or R W) and C D Factors for Building Seismic Provisions.” Journal of Structural Engineering 117 (1): 19–28. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:1(19).
   Web of Science ®Google Scholar
• Uang, C. M., and A. Maarouf. 1994. “Deflection Amplification Factor for Seismic Design Provisions.” Journal of Structural Engineering 120 (8): 2423–2436. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2423).
   Web of Science ®Google Scholar
• Ucar, T., and O. Merter. 2018. “Derivation of Energy-Based Base Shear Force Coefficient Considering Hysteretic Behavior and P-Delta Effects.” Earthquake Engineering and Engineering Vibration 17 (1): 149–163. https://doi.org/10.1007/s11803-018-0431-3.
   Web of Science ®Google Scholar
• Ucar, T., and O. Merter. 2021. “Derivation of Yield Force Coefficient for RC Frames Considering Energy Balance and P-Delta Effects.” Structural Engineering and Mechanics 79 (4): 429–439.‏
   Web of Science ®Google Scholar