References
- Fleming DC, Jackson KE. Crashworthy composite structures: aircraft & vehicle applications. Pennsylvania: DESteach Publications, Incorporated; 2021; p. 1605956465.
- Lu G, Yu T. Energy absorption of structures and materials. New york: Elsevier; 2003; p. 1855738589.
- Ma J, Chai S, Chen Y. Geometric design, deformation mode, and energy absorption of patterned thin-walled structures. Mech Mater. 2022;168:104269.
- Safari H, Nahvi H, Esfahanian M. Improving automotive crashworthiness using advanced high strength steels. Int J Crashworthiness. 2018;23(6):645–659.
- Yu Z, Liu X, Wang J, et al. Shock absorber with inward-folding composite tube and its application in legged landing gear. Int J Crashworthiness. 2020;26(4):388–403. doi: 10.1080/13588265.2020.1718463.
- Zhou H, Wang Z. Application of foldcore sandwich structures in helicopter subfloor energy absorption structure. IOP Conf Ser: Mater Sci Eng. 2017;248(1):012033. doi: 10.1088/1757-899X/248/1/012033.
- Yang X, Ma J, Wen D, et al. Crashworthy design and energy absorption mechanisms for helicopter structures: a systematic literature review. Progr Aerospace Sci. 2020;114:100618.
- Peng Y, Deng W, Xu P, et al. Study on the collision performance of a composite energy-absorbing structure for subway vehicles. Thin-Walled Struct. 2015;94:663–672.
- Xie S, Zhou H. Impact characteristics of a composite energy absorbing bearing structure for railway vehicles. Compos Part B Eng. 2014;67:455–463.
- Belingardi G, Cavatorta M, Duella R. Material characterization of a composite–foam sandwich for the front structure of a high speed train. Compos Struct. 2003;61(1–2):13–25.
- Zhou J, Jia S, Qian J, et al. Improving the buffer energy absorption characteristics of movable lander-numerical and experimental studies. Materials. 2020;13(15):3340.
- Ling C, Ivens J, Cardiff P, et al. Deformation response of EPS foam under combined compression-shear loading. Part I: Exper Design and Quasi-Static Tests. 2018;144:480–489.
- Li Z, Yu J, Guo L. Deformation and energy absorption of aluminum foam-filled tubes subjected to oblique loading. Int J Mech Sci. 2012;54(1):48–56.
- Azarakhsh S, Ghamarian A. Collapse behavior of thin-walled conical tube clamped at both ends subjected to axial and oblique loads. Thin-Walled Struct. 2017;112:1–11. doi: 10.1016/j.tws.2016.11.020.
- Reyes A, Langseth M, Hopperstad OS. Crashworthiness of aluminum extrusions subjected to oblique loading: experiments and numerical analyses. Int J Mech Sci. 2002;44(9):1965–1984. doi: 10.1016/S0020-7403(02)00050-4.
- Reyes A, Hopperstad OS, Langseth M. Aluminum foam-filled extrusions subjected to oblique loading: experimental and numerical study. Mater Res Express. 2004;41(5–6):1645–1675.
- Hou B, Wang Y, Sun T, et al. On the quasi-static and impact responses of aluminum honeycomb under combined shear-compression. Int J Impact Engin. 2019;131:190–199.
- Ming S, Song Z, Li T, et al. The energy absorption of thin-walled tubes designed by origami approach applied to the ends. Mater Des. 2020;192:108725. doi: 10.1016/j.matdes.2020.108725.
- Ming S, Song Z, Zhou C, et al. The energy absorption of long origami-ending tubes with geometrical imperfections. Thin-Walled Struct. 2021;161:107415. doi: 10.1016/j.tws.2020.107415.
- Magliaro J, Altenhof W. Mechanical performance and crashworthiness of plates and extrusions subjected to cutting: an overview. Thin-Walled Struct. 2020;148:106612.
- Hwang Y-H, Han J-H. Energy absorption optimisation of an origami-shaped crash box under axial loading. Int J Crashworthiness. 2023:1–10.
- Garrett D, You Z, Gattas JM. Curved crease tube structures as an energy absorbing crash box. Volume 5B: 40th Mechanisms and Robotics Conference. 2016;50169:V05BT07A017. doi: 10.1115/DETC2016-59784.
- Yang K, Xu S, Shen J, et al. Energy absorption of thin-walled tubes with pre-folded origami patterns. Numer Simulation and Exper Verification. 2016;103:33–44.
- Abramowicz W, Jones N. Dynamic axial crushing of square tubes. Int J Crashworthiness. 1984;2(2):179–208.
- Yao S, Zhu H, Liu M, et al. Energy absorption of origami tubes with polygonal cross-sections. Thin-Walled Struct. 2020;157:107013. doi: 10.1016/j.tws.2020.107013.
- Söderberg A, Sellgren U. Modelling of strain hardening and strain rate hardening of dual phase steels in finite element analysis of energy-absorbing components. NAFEMS World Congress. 2005;(69):1–12.