References
- Amiri Delouei, A., H. Sajjadi, and G. Ahmadi. 2022. “Ultrasonic Vibration Technology to Improve the Thermal Performance of CPU Water-Cooling Systems: Experimental Investigation.” Water 14 (24): 4000. https://doi.org/10.3390/w14244000.
- Amiri Delouei, A., H. Sajjadi, M. Atashafrooz, M. Hesari, and M. B. Hamida. 2022. “Louvered Fin-And-Flat Tube Compact Heat Exchanger Under Ultrasonic Excitation.” Fire 6 (1): 13. https://doi.org/10.3390/fire6010013.
- ASHRAE. 2016. Air Cooling and Dehumidifying Coils in HVAC Systems and Equipment, M.S. Owen Editor.: Tullie Circle, N.E., Atlanta: W. Stephen Comstock.
- Bejan, A., and A. D. Kraus. 2003. Heat Transfer Handbook. Vol. 1. Hoboken, New Jersey: John Wiley & Sons.
- Bergman, T. L. 2011. Fundamentals of Heat and Mass Transfer. United States of America: John Wiley & Sons.
- Chengqin, R., and Y. Hongxing. 2006. “An Analytical Model for the Heat and Mass Transfer Processes in Indirect Evaporative Cooling with Parallel/Counter Flow Configurations.” International Journal of Heat and Mass Transfer 49 (3–4): 617–627. https://doi.org/10.1016/j.ijheatmasstransfer.2005.08.019.
- Cui, X., K. J. Chua, M. R. Islam, and W. M. Yang. 2014. “Fundamental Formulation of a Modified LMTD Method to Study Indirect Evaporative Heat Exchangers.” Energy Conversion and Management 88:372–381. https://doi.org/10.1016/j.enconman.2014.08.056.
- Delouei, A. A., M. Atashafrooz, H. Sajjadi, and S. Karimnejad. 2022. “The Thermal Effects of Multi-Walled Carbon Nanotube Concentration on an Ultrasonic Vibrating Finned Tube Heat Exchanger.” International Communications in Heat and Mass Transfer 135:106098. https://doi.org/10.1016/j.icheatmasstransfer.2022.106098.
- Delouei, A. A., H. Naeimi, H. Sajjadi, N. Atashafrooz, M. Imanparast, and Ali J. Chamkha. 2024. “An Active Approach to Heat Transfer Enhancement in Indirect Heaters of City Gate Stations: An Experimental Modeling.” Applied Thermal Engineering 237:121795. https://doi.org/10.1016/j.applthermaleng.2023.121795.
- Delouei, A. A., H. Sajjadi, and G. Ahmadi. 2023. “The Effect of Piezoelectric Transducer Location on Heat Transfer Enhancement of an Ultrasonic-Assisted Liquid-Cooled CPU Radiator.” Iranian Journal of Science and Technology Transactions of Mechanical Engineering 1–14. https://doi.org/10.1007/s40997-023-00667-5.
- Erens, P., and A. Dreyer. 1993. “Modelling of Indirect Evaporative Air Coolers.” International Journal of Heat and Mass Transfer 36 (1): 17–26. https://doi.org/10.1016/0017-9310(93)80062-Y.
- Esfandyari, M., A. A. Delouei, and A. Jalai. 2023. “Optimization of Ultrasonic-Excited Double-Pipe Heat Exchanger with Machine Learning and PSO.” International Communications in Heat and Mass Transfer 147:106985. https://doi.org/10.1016/j.icheatmasstransfer.2023.106985.
- Hasan, A. 2012. “Going Below the Wet-Bulb Temperature by Indirect Evaporative Cooling: Analysis Using a Modified ε-NTU Method.” Applied Energy 89 (1): 237–245. https://doi.org/10.1016/j.apenergy.2011.07.005.
- Hedeshi, M., A. Jalali, A. Arabkoohsar, and A. Amiri Delouei. 2023. “Nanofluid as the Working Fluid of an Ultrasonic-Assisted Double-Pipe Counter-Flow Heat Exchanger.” Journal of Thermal Analysis and Calorimetry 148 (16): 1–13. https://doi.org/10.1007/s10973-023-12102-7.
- Holman, J. P. 2010. Heat Transfer. USA: McGraw Hill Higher Education.
- Liu, Z., W. Allen, and M. Modera. 2013. “Simplified Thermal Modeling of Indirect Evaporative Heat Exchangers.” HvaC&R Research 19 (3): 257–267. https://doi.org/10.1080/10789669.2013.763653.
- Ma, R., et al. 2021. “Systematic Method for the Energy-Saving Potential Calculation of Air-Conditioning Systems via Data Mining.” Part I: Methodology Energies 14 (1): 81. https://doi.org/10.3390/en14010081.
- Maclaine-Cross, I., and P. Banks. 1981. “A General Theory of Wet Surface Heat Exchangers and Its Application to Regenerative Evaporative Cooling.” Journal of Heat Transfer 103 (3): 579–585. https://doi.org/10.1115/1.3244505.
- Mansour, M. K., and M. Hassab. 2016. “Novel Approach of Thermal Modeling of Partially Dry–Wet Chilled Water Cooling Coil Under Unit and Nonunit Lewis Number Conditions.” Numerical Heat Transfer, Part B: Fundamentals 70 (2): 164–181. https://doi.org/10.1080/10407790.2016.1177394.
- Nuntaphan, A., T. Kiatsiriroat, and C.-C. Wang. 2005. “Heat Transfer and Friction Characteristics of Crimped Spiral Finned Heat Exchangers with Dehumidification.” Applied Thermal Engineering 25 (2–3): 327–340. https://doi.org/10.1016/j.applthermaleng.2004.05.014.
- Pirompugd, W., and S. Wongwises. 2017. “Actual Dry-Bulb Temperature and Equivalent Dry-Bulb Temperature Methods for Wavy Fin-And-Tube Heat Exchangers with Dehumidification.” International Journal of Heat and Mass Transfer 106:675–685. https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.052.
- Ranganayakulu, C., and K. N. Seetharamu. 2018. Compact Heat Exchangers: Analysis, Design and Optimization Using FEM and CFD Approach. USA: John Wiley & Sons.
- Stoitchkov, N., and G. Dimitrov. 1998. “Effectiveness of crossflow plate heat exchanger for indirect evaporative cooling: Efficacité des échangeurs thermiques à plaques, à courants croises pour refroidissement indirect évaporatif.” International Journal of Refrigeration 21 (6): 463–471. https://doi.org/10.1016/S0140-7007(98)00004-8.
- Sun, J., and A. Reddy. 2005. “Optimal Control of Building HvaC&R Systems Using Complete Simulation-Based Sequential Quadratic Programming (CSB-SQP). Building and Environment.” 40 (5): 657–669. https://doi.org/10.1016/j.buildenv.2004.08.011
- Wemhoff, A. 2010. “Application of Optimization Techniques on Lumped HVAC Models for Energy Conservation.” Energy and Buildings 42 (12): 2445–2451. https://doi.org/10.1016/j.enbuild.2010.08.024.
- West, A., and S. Sherif. 2001. “Optimization of multistage vapour compression systems using genetic algorithms. Part 1: Vapour compression system model.” International Journal of Energy Research 25 (9): 803–812. https://doi.org/10.1002/er.723.
- Xia, L., et al. 2009. “A Modified Logarithmic Mean Enthalpy Difference (LMED) Method for Evaluating the Total Heat Transfer Rate of a Wet Cooling Coil Under Both Unit and Non-Unit Lewis Factors.” International Journal of Thermal Sciences 48 (11): 2159–2164. https://doi.org/10.1016/j.ijthermalsci.2009.04.002.
- Xia, L., et al. 2010. “Analytical Solutions for Evaluating the Thermal Performances of Wet Air Cooling Coils Under Both Unit and Non-Unit Lewis Factors.” Energy Conversion and Management 51 (10): 2079–2086. https://doi.org/10.1016/j.enconman.2010.02.041.
- Yu, F., and K. Chan. 2008. “Optimization of Water-Cooled Chiller System with Load-Based Speed Control.” Applied Energy 85 (10): 931–950. https://doi.org/10.1016/j.apenergy.2008.02.008.
- Zainal, N. A., S.N. Sulaiman, M.A. Shamsudin, and I. Waini. 2017. “Numerical Simulation of Different Models of Heat Pipe Heat Exchanger Using AcuSolve.” In MATEC Web of Conferences, Taichung, Taiwan. EDP Sciences.