Experimental substantiation of the technology for manufacturing composite parts based on a viscous metal-polymer

References

• Abaydullin, B. 2008. “The Effect of Rheology and Activation Energy on the Criticality of Heat Transfer in a Laminar Flow of a Non-Newtonian Fluid in a Plane-Parallel Channel.” Fundamental Research 4: 104–105. https://www.elibrary.ru/ijmswz.
   Google Scholar
• Antsiferov, S., A. Karachevtseva, and L. Sivachenko. 2019. “Design and Product Design in NX CAD/CAM/CAE System Managed by Teamcenter PLM System.” Technical Aesthetics and Design Research 2 (2): 45–52. https://doi.org/10.34031/2687-0878-2019-1-2-45-52.
   Google Scholar
• Antsiferov, S., O. Lyutenko, E. Sychev, and L. Sivachenko. 2019. “Technical Aesthetics and Design Research.” Technical Aesthetics and Design Research 1 (4): 38–44. https://doi.org/10.34031/2687-0878-2019-1-4-38-44.
   Google Scholar
• Baurova, N. 2008. Diagnosis and repair of machines using polymer materials: monograph, 280. Moscow: Techpolygraphcenter. https://www.elibrary.ru/qnvwgb.
   Google Scholar
• Baurova, N., and V. Zorin. 2016. The Use of Polymer Composite Materials in the Production and Repair of Machines, 264. Moscow: Moscow Automobile and Highway State Technical University (MADI). https://www.elibrary.ru/vzegiz.
   Google Scholar
• Chepchurov, M., V. Minasova, and I. Maslova. 2018. “To the Question of the Contact Arrangement of Two Cylindrical Parts of the Technological Unit.” Repair, Recovery, Modernization 9 (9): 40–44. https://doi.org/10.31044/1684-2561-2018-0-9-40-44.
   Google Scholar
• Kablov, E., S. Kondrashov, and G. Yurkov. 2013. “Prospects for the Use of Carbon-Containing Nanoparticles in Binders for Polymer Composite Materials.” Russian Nanotechnologies 8 (3–4): 24–42. https://www.elibrary.ru/pxwtlj.
   Google Scholar
• Kipping, J., and T. Schüppstuh. 2023. “Load-Oriented Nonplanar Additive Manufacturing Method for Optimized Continuous Carbon Fiber Parts.” Materials 16 (3): 998–1005. https://doi.org/10.3390/ma16030998.
   PubMed Web of Science ®Google Scholar
• Lubimyi, N. S., A. A. Polshin, M. D. Gerasimov, A. A. Tikhonov, S. I. Antsiferov, B. S. Chetverikov, V. G. Ryazantsev, et al. 2022. “Justification of the Use of Composite Metal-Metal-Polymer Parts for Functional Structures.” Polymers (Basel) 14 (2): 14. https://doi.org/10.3390/polym14020352.
   Web of Science ®Google Scholar
• Lubimyi, N., V. Voronenko, A. Polshin, M. Gerasimov, S. Antsiferov, Kaan Öztürk Oğuz, B. Chetverikov, et al. 2022. “What Is the Economic Feasibility of Manufacturing a Metal-Metal- Polymer Composite Part Compared to Other Technologies?” Australian Journal of Mechanical Engineering 20: 1–12. https://doi.org/10.1080/14484846.2022.2094533.
   Google Scholar
• Matvienko, O. 2020. Mechanics of a Viscous Fluid, 244. Tomsk: Tomsk State University of Architecture and Civil Engineering. https://www.elibrary.ru/japsqi.
   Google Scholar
• Mazlan, M. A., M. A. Anas, N. A. N. Izmin, and A. H. Abdullah. 2023. “Effects of Infill Density, Wall Perimeter and Layer Height in Fabricating 3D Printing Products.” Materials 16 (2): 695–670. https://doi.org/10.3390/ma16020695.
   PubMed Web of Science ®Google Scholar
• Metal-polymer materials. “LEO.” Accessed January 23, 2023. http://leopolimer.ru/MetPolimer.htm.
   Google Scholar
• Pizhenkov, E., V. Podgorbunsky, and V. Roshchin. 2018. “Manufacture of Prefabricated Drill Heads Using SLM 3D Printing Technology.” In Breakthrough Scientific Research as an Engine of Science, Magnitogorsk, 132–137. Vol. 1. Ufa: Limited Liability Company “OMEGA SCIENCE”. https://www.elibrary.ru/voolgc.
   Google Scholar
• Potapov, A. 2016. “Laminar-Turbulent Transition During the Flow of Newtonian and Non-Newtonian Fluids in a Round Pipe.” Scientific and Technical Collection Vesti Gas Science 2 (26): 174–182. https://www.elibrary.ru/ykmxvj.
   Google Scholar
• Zorin, V., and N. Baurova. 2013. “Increasing the Resistance of Polymeric Materials Used in the Repair of Machines to the Effects of Cyclic Loads.” Construction Mechanization 4 (826): 25–27. https://www.elibrary.ru/pyuwfn.
   Google Scholar
• Zorin, V., and N. Baurova. 2013. “Repair of Heat-Loaded Elements of Machines and Equipment Using Filled Polymer Materials.” Repair. Recovery. Modernization 4: 16–18. https://www.elibrary.ru/pyeddp.
   Google Scholar
• Zorin, V., and M. Timchenko. 2018. “The Use of Additive Technologies in the Manufacture of Car Parts.” Truck 4: 16–17. https://www.elibrary.ru/xtgsst.
   Google Scholar