Effects of axial distance on flow behaviours of continuous jet impinging on a flat surface using a finite confined nozzle

References

• Poreh M, Tsuei YG, Cermak JE. Investigation of a turbulent radial wall jet. 1967;34(2):457–463.
   Google Scholar
• Masip Y, Campo A, Nunez SM. Experimental analysis of the thermal performance on electronic cooling by a combination of cross-flow and an impinging air jet. Appl Thermal Eng. 2020;167:114779.
   Web of Science ®Google Scholar
• Chakroun W, Abdel-Rahman A, Al-Fahed S. Heat transfer augmentation for air jet impinged on a rough surface. Appl Thermal Eng. 1998;18(12):1225–1241.
   Web of Science ®Google Scholar
• Ahmed ZU, Al-Abdeli YM, Guzzomi FG. Impingement pressure characteristics of swirling and non-swirling turbulent jets. Exp Thermal Fluid Sci. 2015;68:722–732.
   Web of Science ®Google Scholar
• Ekkad SV, Singh P. A modern review on jet impingement heat transfer methods. J Heat Transfer. 2021;143(6):064001.
   Web of Science ®Google Scholar
• S Grenson P, Léon O, Reulet P, et al. Investigation of an impinging heated jet for a small nozzle-to-plate distance and high Reynolds number: an extensive experimental approach. Int J Heat Mass Transfer. 2016;102:801–815.
   Web of Science ®Google Scholar
• Mohammadpour J, Lee A. Investigation of nanoparticle effects on jet impingement heat transfer: a review. J Mol Liquids. 2020;316:113819.
   Web of Science ®Google Scholar
• Hadipour A, Zargarabadi MR. Heat transfer and flow characteristics of impinging jet on a concave surface at small nozzle to surface distances. Appl Thermal Eng. 2018;138:534–541.
   Web of Science ®Google Scholar
• Barewar SD, Joshi M, Sharma PO, et al. Optimization of jet impingement heat transfer: A review on advanced techniques and parameters. Thermal Sci Eng Progr. 2023;39:101697.
   Google Scholar
• Huang Y, Miao J, Niu Z, et al. Experimental investigation on heat transfer and pressure drop characteristics of confined jet impingement boiling on hybrid-structured surface. Appl Thermal Eng. 2023;218:119320.
   Web of Science ®Google Scholar
• Landreth CC, Adrian RJ. Impingement of a low Reynolds number turbulent circular jet onto a flat plate at normal incidence. Exp Fluids. 1990;9(1–2):74–84.
   Web of Science ®Google Scholar
• Lytle D, Webb B. Air jet impingement heat transfer at low nozzle-plate spacings. Int J Heat Mass Transfer. 1994;37(12):1687–1697.
   Web of Science ®Google Scholar
• Kristiawan M, Sodjavi K, Montagné B, et al. Mass transfer and shear rate on a wall normal to an impinging circular jet. Chem Eng Sci. 2015;132:32–45.
   Web of Science ®Google Scholar
• Wang X, Niu G, Yuan S, et al. Experimental investigation on the mean flow field and impact force of a semi-confined round impinging jet. Fluid Dyn Res. 2015;47(2):025501.
   Web of Science ®Google Scholar
• Schuhler E, Lecordier B, Yon J, et al. Experimental investigation of a low Reynolds number flame jet impinging flat plates. Int J Heat Mass Transfer. 2020;156:119856.
   Web of Science ®Google Scholar
• Viskanta R. Heat transfer to impinging isothermal gas and flame jets. Exp Thermal Fluid Sci. 1993;6(2):111–134.
   Web of Science ®Google Scholar
• Van der Meer TH. Stagnation point heat transfer from turbulent low Reynolds number jets and flame jets. Exp Thermal Fluid Sci. 1991;4(1):115–126.
   Web of Science ®Google Scholar
• Barbosa FV, Teixiera SF, Teixeira JC. 2D PIV analysis of the flow dynamics of multiple jets impinging on a complex moving plate. Int J Heat Mass Transfer. 2022;188:122600.
   Web of Science ®Google Scholar
• Hussain A, Ramjee V. Effects of the axisymmetric contraction shape on incompressible turbulent flow. J Fluids Eng. 1976;98(1):58–68.
   Web of Science ®Google Scholar
• Mei R. Velocity fidelity of flow tracer particles. Exp Fluids. 1996;22(1):1–13.
   Web of Science ®Google Scholar
• Filippa L, Freire L, Trento A, et al. Laboratory evaluation of two LISST-25X using river sediments. Sedimentary Geol. 2011;238(3–4):268–276.
   Web of Science ®Google Scholar
• Flagan RC, Seinfeld JH. Fundamentals of air pollution engineering. Englewood Cliffs, NJ: Prentice Hall; 1988.
   Google Scholar
• Boillot A, Prasad A. Optimization procedure for pulse separation in cross-correlation PIV. Exp Fluids. 1996;21(2):87–93.
   Web of Science ®Google Scholar
• Lin J-C, Ozgoren M, Rockwell D. Space–time development of the onset of a shallow-water vortex. J Fluid Mech. 2003;485:33–66.
   Web of Science ®Google Scholar
• Ozgoren M, Okbaz A, Dogan S, et al. Investigation of flow characteristics around a sphere placed in a boundary layer over a flat plate. Exp Thermal Fluid Sci. 2013;44:62–74.
   Web of Science ®Google Scholar
• Kilavuz A, Ozgoren M, Kavurmacioglu L, et al. Flow characteristics comparison of PIV and numerical prediction results for an unmanned underwater vehicle positioned close to the free surface. Appl Ocean Res. 2022;129:103399.
   Web of Science ®Google Scholar
• Babayigit O, Ozgoren M, Aksoy MH, et al. Experimental and CFD investigation of a multistage centrifugal pump including leakages and balance holes. Desalin Water Treat. 2017;67(3):28–40.
   Google Scholar
• Westerweel J. Fundamentals of digital particle image velocimetry. Measure Sci Technol. 1997;8(12):1379.
   Web of Science ®Google Scholar
• Oweis GF, Ceccio SL. Instantaneous and time-averaged flow fields of multiple vortices in the tip region of a ducted propulsor. Exp Fluids. 2005;38:615–636.
   Web of Science ®Google Scholar
• Steele W, Taylor R, Burrell R, et al. Use of previous experience to estimate precision uncertainty of small sample experiments. AIAA J. 1993;31(10):1891–1896.
   Google Scholar
• Luff J, Drouillard T, Rompage A, et al. Experimental uncertainties associated with particle image velocimetry (PIV) based vorticity algorithms. Exp Fluids. 1999;26(1):36–54.
   Web of Science ®Google Scholar
• Shademan M, Balachandar R, Roussinova V, et al. Round impinging jets with relatively large stand-off distance. Phys Fluids. 2016;28(7):075107.
   Web of Science ®Google Scholar
• Hadžiabdić M, Hanjalić K. Vortical structures and heat transfer in a round impinging jet. J Fluid Mech. 2008;596:221–260.
   Web of Science ®Google Scholar
• El Hassan M, Assoum HH, Sobolik V, et al. Experimental investigation of the wall shear stress and the vortex dynamics in a circular impinging jet. Exp Fluids. 2012;52:1475–1489.
   Web of Science ®Google Scholar
• Van Hout R, Rinsky V, Grobman Y. Experimental study of a round jet impinging on a flat surface: flow field and vortex characteristics in the wall jet. Int J Heat Fluid Flow. 2018;70:41–58.
   Web of Science ®Google Scholar
• Kiya M, Ohyama M, Hunt J. Vortex pairs and rings interacting with shear-layer vortices. J Fluid Mech. 1986;172:1–15.
   Web of Science ®Google Scholar
• Knowles K, Myszko M. Turbulence measurements in radial wall-jets. Exp Thermal Fluid Sci. 1998;17(1–2):71–78.
   Web of Science ®Google Scholar
• Didden N, Ho C-M. Unsteady separation in a boundary layer produced by an impinging jet. J Fluid Mech. 1985;160:235–256.
   Web of Science ®Google Scholar
• Hall JW, Ewing D. On the dynamics of the large-scale structures in round impinging jets. J Fluid Mechan. 2006;555:439–458.
   Web of Science ®Google Scholar