Evaluating the corrosion and tribological performance of nanostructured CrN/TiN and TiN/CrN configurations applied on 410 stainless steel

References

• G.A. Rodríguez-BRavo, M. Vite-Torres, and J.G. Godínez Salcedo, Analysis on the corrosion rate changes of Aisi 410 stainless steel submitted to abrasion-corrosion in simulated marine conditions. Proc. Eng. Sci. 1(1) (2019), pp. 90–97. doi: 10.24874/pes01.01.012.
   Google Scholar
• R.T. Loto, Study of the corrosion behaviour of S32101 duplex and 410 martensitic stainless steel for application in oil refinery distillation systems. J. Mater. Res. Technol 6(3) (2017), pp. 203–212. doi: 10.1016/j.jmrt.2016.11.001.
   Google Scholar
• T.S. De Oliveira, E.S. Silva, S.F. Rodrigues, C.C.F. Nascimento, V.S. Leala, and G.S. Reis, Softening mechanisms of the AISI 410 martensitic stainless steel under hot torsion simulation. Mater. Res 20(2) (2017), pp. 395–406. doi: 10.1590/1980-5373-MR-2016-0795.
   Web of Science ®Google Scholar
• A. Pramanik and A.K. Basak, Stainless Steel Microstructure, Mechanical Properties and Methods of Application, Nova Science Publishers, New York, 2015.
   Google Scholar
• Y. Dvirnyk, D. Pavlenko, and R. Przysowa, Determination of serviceability limits of a turboshaft engine by the criterion of blade natural frequency and stall margin. Aerospace 304 (2019), pp. 03004. doi: 10.1051/matecconf/201930403004.
   Google Scholar
• L.E. Geambazu, I. Voiculescu, C.A. Manea, and R.V. Bololoi, Economic efficiency of high-entropy alloy corrosion-resistant coatings designed for geothermal turbine blades: a case study. Appl. Sci. 12(14) (2022). doi: 10.3390/app12147196.
   Google Scholar
• P. Fördös and J. Čerňan, Analysis of the impact of hard pvd coatings on the abrasion resistance of the compressor blades. Adv Mil Technol. 15(1) (2020), pp. 85–95. doi: 10.3849/aimt.01333.
   Google Scholar
• N. Bharadishettar, K.U. Bhat, and D.B. Panemangalore, Coating technologies for copper based antimicrobial active surfaces: a perspective review. Metals 11(5) (2021). doi: 10.3390/met11050711.
   Web of Science ®Google Scholar
• B. Fotovvati, N. Namdari, and A. Dehghanghadikolaei, On coating techniques for surface protection: a review. J. Manuf. Mater. Process 3(1) (2019). doi: 10.3390/jmmp3010028.
   Google Scholar
• Z.A. Fazel, H. Elmkhah, A. Fattah-Alhosseini, K. Babaei, and M. Meghdari, Comparing electrochemical behavior of applied CrN/TiN nanoscale multilayer and TiN single-layer coatings deposited by CAE-PVD method. J. Asian Ceram. Soc 8(2) (2020), pp. 510–518. doi: 10.1080/21870764.2020.1756065.
   Web of Science ®Google Scholar
• G. Faghani, S.M. Rabiee, S. Nourouzi, and H. Elmkhah, Self-cleaning properties of TiN/CrN nanoscale multi-layer deposited on surgical 420C stainless steel. Journal of Nanostructures 9(4) (2019), pp. 702–711. doi: 10.22052/JNS.2019.04.012.
   Web of Science ®Google Scholar
• K. Khlifi and A. Ben Cheikh Larbi, Investigation of adhesion of PVD coatings using various approaches. Surf. Eng 29(7) (2013), pp. 555–560. doi: 10.1179/1743294413Y.0000000150.
   Web of Science ®Google Scholar
• F. Lin, Y. Xia, and X. Feng, Conductive and tribological properties of TiN-Ag composite coatings under grease lubrication. Friction 9(4) (2021), pp. 774–788. doi: 10.1007/s40544-020-0373-4.
   Web of Science ®Google Scholar
• A. Agüero, M. Juez-Lorenzo, P.E. Hovsepian, A.P. Ehiasarian, Y.P. Purandare, and R. Muelas, Long-term behaviour of Nb and Cr nitrides nanostructured coatings under steam at 650 °C. Mechanistic considerations. J. Alloys Compd 739 (2018), pp. 549–558. doi: 10.1016/j.jallcom.2017.12.288.
   Web of Science ®Google Scholar
• Y. Liu, S. Yu, Q. Shi, X. Ge, and W. Wang, Multilayer coatings for tribology: a mini review. Nanomaterials 12(9) (2022). doi: 10.3390/nano12091388.
   Web of Science ®Google Scholar
• W. Ernst, J. Neidhardt, H. Willmann, B. Sartory, P.H. Mayrhofer, and C. Mitterer, Thermal decomposition routes of CrN hard coatings synthesized by reactive arc evaporation and magnetron sputtering. Thin Solid Films 517(2) (2008), pp. 568–574. doi: 10.1016/j.tsf.2008.06.086.
   Web of Science ®Google Scholar
• A. Pogrebnjak, K. Smyrnova, and O. Bondar, Nanocomposite multilayer binary nitride coatings based on transition and refractory metals: structure and properties. Coatings 9(3) (2019). doi: 10.3390/coatings9030155.
   Web of Science ®Google Scholar
• V.S. Pahade, P.S. Chavan, and V.P. Baisane, A review paper on vapour deposition coating,” Int. J. Eng. Appl. Sci 3(6) (2016), pp. 75–78. [Online]. Available: www.ijeas.org.
   Google Scholar
• E. Lotfi-khojasteh, M. Sahebazamani, H. Elmkhah, M. Nouri, O. Imantalab, and A. Fattah-alhosseini, A study of the electrochemical and tribological properties of TiN/CrN nano-layer coating deposited on carburized-H13 hot-work steel by Arc-PVD technique. J. Asian Ceram. Soc 9(1) (2021), pp. 247–259. doi: 10.1080/21870764.2020.1863577.
   Web of Science ®Google Scholar
• Q. Yang, L.R. Zhao, and P. Patnaik, Erosion performance, corrosion characteristics and hydrophobicity of nanolayered and multilayered metal nitride coatings. Surf. Coat. Technol. 375 (2019), pp. 763–772. doi: 10.1016/j.surfcoat.2019.07.074.
   Web of Science ®Google Scholar
• L. Kolaklieva, S. Rabadzhiyska, R. Kakanakov, V. Chitanov, T. Cholakova, V. Rupetchov, and G. Mishev, Evaluation of the mechanical and tribological properties of multilayer CrN/TiN films deposited at low temperatures, in Proceedings of the International Conference on Microelectronics, ICM, L. Anguera S.C. Satapathy, V. Bhateja and K.V.N. Sunitha, eds., Springer, Sigapore, 2017, pp. 187–190. doi: 10.1109/MIEL.2017.8190099.
   Google Scholar
• H. Olia, R. Ebrahimi-Kahrizsangi, F. Ashrafizadeh, and I. Ebrahimzadeh, Comparative study of corrosion and corrosion-wear behavior of TiN and CrN coatings on UNS S17400 stainless steel. Corros. Rev 36(4) (2018), pp. 403–412. doi: 10.1515/corrrev-2017-0130.
   Web of Science ®Google Scholar
• G. Faghani, S.M. Rabiee, S. Nourouzi, and H. Elmkhah, Corrosion behavior of TiN/CrN nanoscale multi-layered coating in ringer’s solution. Int. J. Eng. Trans. B Appl 33(2) (2020), pp. 329–336. doi: 10.5829/IJE.2020.33.02B.18.
   Web of Science ®Google Scholar
• M. Forouzanmehr, K. Reza Kashyzadeh, A. Borjali, A. Ivanov, M. Jafarnode, T.H. Gan, B. Wang, and M. Chizari, Detection and analysis of corrosion and contact resistance faults of TiN and CrN coatings on 410 stainless steel as bipolar plates in PEM fuel cells. Sensors 22(3) (2022). doi: 10.3390/s22030750.
   PubMed Web of Science ®Google Scholar
• S.G. Croll, Surface roughness profile and its effect on coating adhesion and corrosion protection: a review. Prog. Org. Coatings 148 (2020), doi: 10.1016/j.porgcoat.2020.105847.
   Web of Science ®Google Scholar
• A.S. Toloei, V. Stoilov, and D.O. Northwood, The effect of different surface topographies on the corrosion behaviour of nickel. WIT Trans. Eng. Sci. 77 (2013), pp. 193–204. doi: 10.2495/MC130171.
   Google Scholar
• M. Hanief and M.F. Wani, Effect of surface roughness on wear rate during running-in of En31-steel: model and experimental validation. Mater. Lett 176 (2016), pp. 91–93. doi: 10.1016/j.matlet.2016.04.087.
   Web of Science ®Google Scholar
• N.S. Mansoor, A. Fattah-alhosseini, H. Elmkhah, and A. Shishehian, Electrochemical behavior of TiN, CrN and TiN/CrN nanostructured coatings on the nickel-chromium alloy used in dental fixed prosthesis. J. Asian Ceram. Soc 8(3) (2020), pp. 694–710. doi: 10.1080/21870764.2020.1776915.
   Web of Science ®Google Scholar
• Z. Zhang, J. Chen, G. He, and G. Yang, Fatigue and mechanical behavior of Ti-6Al-4V alloy with CrN and TiN coating deposited by magnetic filtered cathodic vacuum arc process. Coatings 9(10) (2019), pp. 1–13. doi: 10.3390/COATINGS9100689.
   Web of Science ®Google Scholar
• R. Hahn, M. Bartosik, R. Soler, C. Kirchlechner, G. Dehm, and P.H. Mayrhofer, Superlattice effect for enhanced fracture toughness of hard coatings. Scr. Mater 124 (2016), pp. 67–70. doi: 10.1016/j.scriptamat.2016.06.030.
   Web of Science ®Google Scholar
• C.H. Hsu, C.K. Lin, K.H. Huang, and K.L. Ou, Improvement on hardness and corrosion resistance of ferritic stainless steel via PVD-(Ti,Cr)N coatings. Surf. Coatings Technol 231 (2013), pp. 380–384. doi: 10.1016/j.surfcoat.2012.05.095.
   Web of Science ®Google Scholar
• P.E. Hovsepian, A.A. Sugumaran, Y. Purandare, and A.P. Ehiasarian, Corrosion behaviour of post-deposition polished droplets- embedded arc evaporated and droplets-free HIPIMS / DCMS coatings. Corros. -Houst. Tx (2017), pp. 685–693. doi: 10.5006/2064.
   Google Scholar
• B.D. Beake, V.M. Vishnyakov, and A.J. Harris, Nano-scratch testing of (Ti,Fe)Nx thin films on silicon. Surf. Coat. Technol. 309 (2017), pp. 671–679. doi: 10.1016/j.surfcoat.2016.11.024.
   Web of Science ®Google Scholar
• A.M. Kenneth Holmberg, Coatings Tribology Properties, Mechanisms, Techniques and Applications in Surface, Elsevier, Oxford, 2009.
   Google Scholar
• Y. Feng, J. Cheng, D. Liu, and X. Liang, Effects of Cr and Nb additions on sliding wear behaviors of the FePSiB coatings. Coatings 8(12) (2018). doi: 10.3390/COATINGS8120463.
   Web of Science ®Google Scholar
• G. Faghani, S.M. Rabiee, S. Nourouzi, and H. Elmkhah, Nanoscale multi-layer thin film fabricated by Cathodic Arc Evaporation (CAE) method. J. Superhard Mater 42(2) (2020), pp. 78–89. doi: 10.3103/S1063457620020057.
   Web of Science ®Google Scholar
• X. Huang, T. Junguo, Z. Tengfei, M. Jinjun, G. Zecui, Z. Xing, and W. Qimin, Deposition and anti-wear/corrosion properties of nano-multilayer TiN/CrN films on titanium alloy. Cailiao Daobao/Materials Reports 35(4) (2021), pp. 04139–04143. doi: 10.11896/cldb.19070256.
   Google Scholar
• J. Guo, H. Wang, F. Meng, X. Liu, and F. Huang, Tuning the H/E* ratio and E* of AlN coatings by copper addition. Surf. Coat. Technol. 228 (2013), pp. 68–75. doi: 10.1016/j.surfcoat.2013.04.008.
   Web of Science ®Google Scholar
• W.Y. Lee, Y.J. Jang, T. Tokoroyama, M. Murashima, and N. Umehara, Effect of defects on wear behavior in ta-C coating prepared by filtered cathodic vacuum arc deposition. Diamond Relat. Mater. 105 (2020). doi: 10.1016/j.diamond.2020.107789.
   Web of Science ®Google Scholar
• J. Wang, Y. Wu, Y. Cao, G. Li, and Y. Liao, Influence of surface roughness on contact angle hysteresis and spreading work. Colloid Polym. Sci. 298(8) (2020), pp. 1107–1112. doi: 10.1007/s00396-020-04680-x.
   Web of Science ®Google Scholar
• L. Cao, Superhydrophobic surface design fabrication and application, Ph.D. Thesis, University of Pittsburgh, 2010.
   Google Scholar
• N.S. Mansoor, A. Fattah-Alhosseini, H. Elmkhah, and A. Shishehian, Comparison of the mechanical properties and electrochemical behavior of TiN and CrN single-layer and CrN/TiN multi-layer coatings deposited by PVD method on a dental alloy. Mater. Res. Express 6(12) (2019). doi: 10.1088/2053-1591/ab640d.
   Google Scholar
• M. Noori, M. Atapour, F. Ashrafizadeh, H. Elmkhah, G.G. di Confiengo, S. Ferraris, S. Perero, M. Cardu, and S. Spriano, Nanostructured multilayer CAE-PVD coatings based on transition metal nitrides on Ti6Al4V alloy for biomedical applications. Ceram. Int. 49(14) (2023), Techna Group S.r.l.
   Web of Science ®Google Scholar
• J. Lou, Z. Gao, J. Zhang, H. He, and X. Wang, Comparative investigation on corrosion resistance of stainless steels coated with titanium nitride, nitrogen titanium carbide and titanium-diamond-like carbon films. Coatings 11(12) (2021). doi: 10.3390/coatings11121543.
   Web of Science ®Google Scholar