Structured mesh material with gradient surface wettability for high-power-density proton exchange membrane fuel cells

References

• Bao, Z., B. Xie, W. Li, S. Zhong, L. Fan, C. Tongsh, F. Gao, Q. Du, M. Benbouzid, K. Jiao, et al. 2023. High-consistency proton exchange membrane fuel cells enabled by oxygen-electron mixed-pathway electrodes via digitalization design. Science Bulletin 68(3):266–75. doi:10.1016/j.scib.2023.01.034.
   PubMed Web of Science ®Google Scholar
• Chen, F., S. Chen, A. Wang, M. Wang, L. Guo, and Z. Wei. 2023. Blocking the sulfonate group in nafion to unlock platinum’s activity in membrane electrode assemblies. Nature Catalysis 6 (5):392–401. doi:10.1038/s41929-023-00949-w.
   Web of Science ®Google Scholar
• El-Kharouf, A., T. J. Mason, D. J. L. Brett, and B. G. Pollet. 2012. Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells. Journal of Power Sources 218:393–404. doi:10.1016/j.jpowsour.2012.06.099.
   Web of Science ®Google Scholar
• Fan, J., M. Chen, Z. Zhao, Z. Zhang, S. Ye, S. Xu, H. Wang, and H. Li. 2021. Bridging the gap between highly active oxygen reduction reaction catalysts and effective catalyst layers for proton exchange membrane fuel cells. Nature Energy 6 (5):475–86. doi:10.1038/s41560-021-00824-7.
   Web of Science ®Google Scholar
• Huo, W., B. Xie, S. Wu, Wu L, Zhang G, Zhang H, Qin Z, Zhu Y, Wang R, Jiao K. 2023. Full-scale multiphase simulation of automobile PEM fuel cells with different flow field configurations. International Journal of Green Energy 21(1):1–16. doi:10.1080/15435075.2023.2194978.
   Web of Science ®Google Scholar
• Islam, M. N., A. B. Mansoor Basha, V. O. Kollath, A. P. Soleymani, J. Jankovic, and K. Karan. 2022. Designing fuel cell catalyst support for superior catalytic activity and low mass-transport resistance. Nature Communications 13 (1):6157. doi:10.1038/s41467-022-33892-8.
   PubMed Web of Science ®Google Scholar
• Jiao, K., J. Xuan, Q. Du, Z. Bao, B. Xie, B. Wang, Y. Zhao, L. Fan, H. Wang, Z. Hou, et al. 2021. Designing the next generation of proton-exchange membrane fuel cells. Nature 595(7867):361–69. doi:10.1038/s41586-021-03482-7.
   PubMed Web of Science ®Google Scholar
• Kerkoub, Y., A. Benzaoui, F. Haddad, and Y. K. Ziari. 2018. Channel to rib width ratio influence with various flow field designs on performance of PEM fuel cell. Energy Conversion and Management 174:260–75. doi:10.1016/j.enconman.2018.08.041.
   Web of Science ®Google Scholar
• Li, Z., F. Bai, P. He, Z. Zhang, and W.-Q. Tao. 2023. Three-dimensional performance simulation of PEMFC of metal foam flow plate reconstructed with improved full morphology. International Journal of Hydrogen Energy 48 (71):27778–89. doi:10.1016/j.ijhydene.2023.03.334.
   Web of Science ®Google Scholar
• Liu, X., Y. Li, J. Xue, W. Zhu, J. Zhang, Y. Yin, Y. Qin, K. Jiao, Q. Du, B. Cheng, et al. 2019. Magnetic field alignment of stable proton-conducting channels in an electrolyte membrane. Nature Communications 10(1):842. doi:10.1038/s41467-019-08622-2.
   PubMedGoogle Scholar
• Meng, X., H. Ren, J. Hao, and Z. Shao. 2022. Design and experimental research of a novel droplet flow field in proton exchange membrane fuel cell. Chemical Engineering Journal 450:138276. doi:10.1016/j.cej.2022.138276.
   Web of Science ®Google Scholar
• Ning, F., Z. Chai, X. Dan, P. Liu, Q. Wen, S. Pan, C. He, Y. Li, H. Jin, W. Li, et al. 2023. Integrated gas diffusion electrode with high conductivity obtained by skin electroplating for high specific power density fuel cell. Small Methods 7(2):2201256. doi:10.1002/smtd.202201256.
   Web of Science ®Google Scholar
• Ozden, A., S. Shahgaldi, X. Li, and F. Hamdullahpur. 2019. A review of gas diffusion layers for proton exchange membrane fuel cells—With a focus on characteristics, characterization techniques, materials and designs. Progress in Energy and Combustion Science 74:50–102. doi:10.1016/j.pecs.2019.05.002.
   Web of Science ®Google Scholar
• Park, C. H., S. Y. Lee, D. S. Hwang, D. W. Shin, D. H. Cho, K. H. Lee, T.-W. Kim, T.-W. Kim, M. Lee, D.-S. Kim, et al. 2016. Nanocrack-regulated self-humidifying membranes. Nature 532(7600):480–83. doi:10.1038/nature17634.
   PubMed Web of Science ®Google Scholar
• Park, J. E., J. Lim, M. S. Lim, S. Kim, O.-H. Kim, D. W. Lee, J. H. Lee, Y.-H. Cho, and Y.-E. Sung. 2019. Gas diffusion layer/flow-field unified membrane-electrode assembly in fuel cell using graphene foam. Electrochimica Acta 323:134808. doi:10.1016/j.electacta.2019.134808.
   Web of Science ®Google Scholar
• Qin, Z., W. Huo, Z. Bao, C. Tongsh, B. Wang, Q. Du, and K. Jiao. 2023. Alternating flow field design improves the performance of proton exchange membrane fuel cells. Advanced Science 10 (4):2205305. doi:10.1002/advs.202205305.
   Web of Science ®Google Scholar
• Tanaka, S., K. Nagumo, M. Yamamoto, H. Chiba, K. Yoshida, and R. Okano. 2020. Fuel cell system for honda CLARITY fuel cell. eTransportation 3:100046. doi:10.1016/j.etran.2020.100046.
   Google Scholar
• Tanaka, S., and T. Shudo. 2014. Corrugated mesh flow channel and novel microporous layers for reducing flooding and resistance in gas diffusion layer-less polymer electrolyte fuel cells. Journal of Power Sources 268:183–93. doi:10.1016/j.jpowsour.2014.04.159.
   Web of Science ®Google Scholar
• Tanaka, S., and T. Shudo. 2015. Experimental and numerical modeling study of the electrical resistance of gas diffusion layer-less polymer electrolyte membrane fuel cells. Journal of Power Sources 278:382–95. doi:10.1016/j.jpowsour.2014.12.077.
   Web of Science ®Google Scholar
• Tongsh, C., S. Wu, K. Jiao, W. Huo, Q. Du, J. W. Park, J. Xuan, H. Wang, N. P. Brandon, M. D. Guiver, et al. 2024. Fuel cell stack redesign and component integration radically increase power density. Joule 8(1):1–18. doi:10.1016/j.joule.2023.12.003.
   Web of Science ®Google Scholar
• Toshihiko, Y., and K. Koichi. 2015. Toyota MIRAI fuel cell vehicle and progress toward a future hydrogen society. The Electrochemical Society Interface 24 (2):45–49. doi:10.1149/2.F03152if.
   Google Scholar
• Wang, G., F. Huang, Y. Yu, S. Wen, and Z. Tu. 2018. Degradation behavior of a proton exchange membrane fuel cell stack under dynamic cycles between idling and rated condition. International Journal of Hydrogen Energy 43 (9):4471–81. doi:10.1016/j.ijhydene.2018.01.020.
   Web of Science ®Google Scholar
• Wang, Y., Y. Pang, H. Xu, A. Martinez, and K. S. Chen. 2022. PEM fuel cell and electrolysis cell technologies and hydrogen infrastructure development – a review. Energy & Environmental Science 15 (6):2288–328. doi:10.1039/D2EE00790H.
   Web of Science ®Google Scholar
• Wang, X., Y. Qin, S. Wu, X. Shangguan, J. Zhang, and Y. Yin. 2020. Numerical and experimental investigation of baffle plate arrangement on proton exchange membrane fuel cell performance. Journal of Power Sources 457:228034. doi:10.1016/j.jpowsour.2020.228034.
   Web of Science ®Google Scholar
• Wang, Y., D. F. Ruiz Diaz, K. S. Chen, Z. Wang, and X. C. Adroher. 2019. Materials, technological status, and fundamentals of PEM fuel cells – a review. Materials Today 32:178–203. doi:10.1016/j.mattod.2019.06.005.
   Web of Science ®Google Scholar
• Wu, L., G. Zhang, X. Shi, Z. Pan, B. Xie, W. Huo, K. Jiao, and L. An. 2024. All-scale investigation of a commercial proton exchange membrane fuel cell with partially narrow channels. Journal of Power Sources 589:233779. doi:10.1016/j.jpowsour.2023.233779.
   Web of Science ®Google Scholar
• Xie, B., H. Zhang, W. Huo, R. Wang, Y. Zhu, L. Wu, G. Zhang, M. Ni, and K. Jiao. 2023. Large-scale three-dimensional simulation of proton exchange membrane fuel cell considering detailed water transition mechanism. Applied Energy 331:120469. doi:10.1016/j.apenergy.2022.120469.
   Web of Science ®Google Scholar
• Yoshizumi, T., H. Kubo, M. Okumura. 2021. Development of high-performance FC stack for the new MIRAI. SAE Technical Paper Series. p. 2021-01-0740.
   Google Scholar
• Zhang, G., Z. Qu, W.-Q. Tao, Y. Mu, K. Jiao, H. Xu, and Y. Wang. 2024. Advancing next-generation proton-exchange membrane fuel cell development in multi-physics transfer. Joule 8 (1):45–63. doi:10.1016/j.joule.2023.11.015.
   Google Scholar
• Zhang, G., Z. Qu, W.-Q. Tao, X. Wang, L. Wu, S. Wu, X. Xie, C. Tongsh, W. Huo, Z. Bao, et al. 2023. Porous flow field for next-generation proton exchange membrane fuel cells: Materials, characterization, design, and challenges. Chemical Reviews 123(3):989–1039. doi:10.1021/acs.chemrev.2c00539.
   PubMedGoogle Scholar
• Zhang, G., Z. Qu, and Y. Wang. 2022. Full-scale three-dimensional simulation of air-cooled proton exchange membrane fuel cell stack: Temperature spatial variation and comprehensive validation. Energy Conversion and Management 270:116211. doi:10.1016/j.enconman.2022.116211.
   Web of Science ®Google Scholar
• Zhang, G., L. Wu, C. Tongsh, Z. Qu, S. Wu, B. Xie, W. Huo, Q. Du, H. Wang, L. An, et al. 2023. Structure design for ultrahigh power density proton exchange membrane fuel cell. Small Methods 7(3):2201537. doi:10.1002/smtd.202201537.
   Web of Science ®Google Scholar
• Zhang, G., J. Wu, Y. Wang, Y. Yin, and K. Jiao. 2020. Investigation of current density spatial distribution in PEM fuel cells using a comprehensively validated multi-phase non-isothermal model. International Journal of Heat and Mass Transfer 150:119294. doi:10.1016/j.ijheatmasstransfer.2019.119294.
   Web of Science ®Google Scholar
• Zhang, G., B. Xie, Z. Bao, Z. Niu, and K. Jiao. 2018. Multi-phase simulation of proton exchange membrane fuel cell with 3D fine mesh flow field. International Journal of Energy Research 42 (15):4697–709. doi:10.1002/er.4215.
   Web of Science ®Google Scholar
• Zhang, G., H. Yuan, Y. Wang, and K. Jiao. 2019. Three-dimensional simulation of a new cooling strategy for proton exchange membrane fuel cell stack using a non-isothermal multiphase model. Applied Energy 255:113865. doi:10.1016/j.apenergy.2019.113865.
   Web of Science ®Google Scholar