Optimization of the Si₃N₄ coating formation through plasma spraying on Inconel 738

References

• Pradhan D, Mahobia GS, Chattopadhyay K, et al. Effect of surface roughness on corrosion behavior of the superalloy IN718 in simulated marine environment. J Alloy Compd. 2018;740:250–263. doi:10.1016/j.jallcom.2018.01.042
   Web of Science ®Google Scholar
• Shankar R, Balasubramanian KR, Sivapirakasam SP. Hot corrosion behavior of nanostructured and conventional HVOF Cr3C2NiCrBSi coatings on superalloy. Mater Today Proc. 2021;46:9529–9536. doi:10.1016/j.matpr.2020.04.005
   Google Scholar
• Rapp RA. Hot corrosion of materials: a fluxing mechanism. Corros Sci. 2002;44:209–221.
   Web of Science ®Google Scholar
• Targhi VT, Omidvar H, Sharifianjazi F, et al. Hot corrosion behavior of aluminized and Si-modified aluminized coated IN-738LC produced by a novel hot-dip process. Surf Interfaces. 2020;21:100599. doi:10.1016/j.surfin.2020.100599
   Web of Science ®Google Scholar
• Zhang LN, Ojo OA. Corrosion behavior of wire arc additive manufactured Inconel 718 superalloy. J Alloy Compd. 2020;829:154455. doi:10.1016/j.jallcom.2020.154455
   Web of Science ®Google Scholar
• Moghaddam AO, Sudarikov M, Shaburova N, et al. High temperature oxidation resistance of W-containing high entropy alloys. J Alloy Compd. 2022;897:162733. doi:10.1016/j.jallcom.2021.162733
   Web of Science ®Google Scholar
• Chen L, Zhou Z, Tan Z, et al. High temperature oxidation behavior of Al0. 6CrFeCoNi and Al0. 6CrFeCoNiSi0. 3 high entropy alloys. J Alloy Compd. 2018;764:845–852. doi:10.1016/j.jallcom.2018.06.036
   Web of Science ®Google Scholar
• Zhao P, Li J, Zhang Y, et al. Wear and high-temperature oxidation resistances of AlNbTaZrx high-entropy alloys coatings fabricated Ti6Al4V by laser cladding. J Alloy Compd. 2021;862:158405. doi:10.1016/j.jallcom.2020.158405
   Web of Science ®Google Scholar
• Podchernyaeva IA, Panasyuk AD, Teplenko MA, et al. Protective coatings on heat-resistant nickel alloys. Powder Metall Met Ceram. 2000;39(9):434–444. doi:10.1023/A:1011358221085
   Web of Science ®Google Scholar
• Riley FL. Application of silicon nitride ceramics. In: H Mostaghaci, editor. Advanced ceramic materials, Key engineering materials. Zurich: Trans Tech Publ. Ltd.; 1996, 122/124, p 479–488.
   Google Scholar
• Usuba S, Heimann RB. Dense Si3N4 coatings with high friction coefficient deposited by high-velocity pulsed plasma spraying. J Therm Spray Technol. 2006;15(3):356–363. doi:10.1361/105996306X124356
   Web of Science ®Google Scholar
• Najafizadeh M, Ghasempour-Mouziraji M, Zhang D. Silicon diffusion in silicide coatings deposition by the pack cementation method on AISI D2 tool steel. Silicon. 2022;14:3349–3356. doi:10.1007/s12633-021-01057-9
   Web of Science ®Google Scholar
• Najafizadeh M, Hosseinzadeh M, Ghasempour-Mouziraji M, et al. Growth mechanism and kinetics of siliconizing of AISI D2 tool steel. Silicon. 2022;14:11395–11403. doi:10.1007/s12633-022-01871-9
   Web of Science ®Google Scholar
• Najafizadeh M, Ghasempour-Mouziraji M, Sadeghi B, et al. Characterization of Tribological and mechanical properties of the Si3N4 coating fabricated by duplex surface treatment of pack siliconizing and plasma Nitriding on AISI D2 tool steel. Metall Mater Trans A. 2021;52(11):4753–4766. doi:10.1007/s11661-021-06410-6
   Web of Science ®Google Scholar
• Hosseinzadeh M, Ghasempour-Mouziraji M. An analysis of tube drawing process used to produce squared sections from round tubes through FE simulation and response surface methodology. Int J Adv Manuf Technol. 2016;87(5-8):2179–2194. doi:10.1007/s00170-016-8532-5
   Web of Science ®Google Scholar
• Najafizadeh M, Ghasempour-Mouziraji M. Multi-objective optimization of process parameters in pack siliconizing on AISI D2 steel. Silicon. 2021;13(7):2233–2242. doi:10.1007/s12633-020-00735-4
   Web of Science ®Google Scholar
• Najafizadeh M, Hosseinzadeh M, Ghasempour-Mouziraji M, et al. Pack siliconizing optimization of AISI D2 tool steel. Silicon. 2022;14:10669–10679. doi:10.1007/s12633-022-01760-1
   Web of Science ®Google Scholar
• ASTM C633-1. (2008). Standard test method for adhesion or cohesion strength of thermal spray coatings, Reapproved.
   Google Scholar
• Van Tran CC, La DD. Synthesis of silicon nitride ceramic material using direct nitridation process. Int J Adv Eng Res Sci. 2018;5(8):101–105. doi:10.22161/ijaers.5.8.14
   Google Scholar
• Riley FL. Silicon nitrides: an overview. Sci Ceram. 2013;12:15–20.
   Google Scholar
• Fayomi J, Popoola API, Popoola OM, et al. Understanding the microstructural evolution, mechanical properties, and tribological behavior of AA8011-reinforced nano-Si3N4 for automobile application. Int J Adv Manuf Technol. 2020;111:53–62. doi:10.1007/s00170-020-06054-7
   Web of Science ®Google Scholar
• Kawaoka H, Adachi T, Sekino T, et al. Effect of α/β phase ratio on microstructure and mechanical properties of silicon nitride ceramics. J Mater Res. 2001;16(8):2264–2270. doi:10.1557/JMR.2001.0311
   Web of Science ®Google Scholar
• Sahab ARM, Saad NH, Kasolang S, et al. Impact of plasma spray variables parameters on mechanical and wear behaviour of plasma sprayed Al2O3 3% wt TiO2 coating in abrasion and erosion application. Procedia Eng. 2012;41:1689–1695. doi:10.1016/j.proeng.2012.07.369
   Google Scholar
• Xing Y-Z, Li X-H, Zhang Y, et al. Effect of spray parameters on the splashing of plasma-sprayed cast iron particles. J Wuhan Univ Technol-Mater Sci Ed. 2016;31:399–403. doi:10.1007/s11595-016-1382-z
   Web of Science ®Google Scholar
• Xing Y-Z, Liu Z, Wang G, et al. Effects of spray parameters on the adhesion between plasmas prayed cast iron splat and aluminium. Surf Coat Technol. 2017;315:1–8. doi:10.1016/j.surfcoat.2017.02.019
   Web of Science ®Google Scholar
• Li C-J, Yang G-J, Li C-X. Development of particle interface bonding in thermal spray coatings: a review. J Therm Spray Tech. 2013;22:192–206. doi:10.1007/s11666-012-9864-9
   Web of Science ®Google Scholar
• Najafizadeh M, Ghasempour-Mouziraji M, Hosseinzadeh M, et al. Optimization of biocorrosion resistance and mechanical properties of PM Ti–XAl–2Fe–3Cu alloys by response surface methodology. J Mater Sci. 2022;57:18669–18686. 10.1007/s10853-022-07768-7.
   Web of Science ®Google Scholar
• Taniuchi T, Adachi T, Kobayashi K. Chemical vaper deposition of Si3N4 onto metal substrate. Surf Coat Technol. 1991;49:13–17. doi:10.1016/0257-8972(91)90024-Q
   Web of Science ®Google Scholar
• Geng S, Wang F, Zhu S. High-Temperature oxidation behavior of sputtered IN 738 nanocrystalline coating. Oxid Met. 2002;57:231–243. doi:10.1023/A:1014870101143
   Web of Science ®Google Scholar