Workshop digitalisation and its effect on manufacturing operations management: a new analysis method from a data quality perspective

References

• Adeyemi, B., A. Ogbeyemi, and W. Zhang. 2021. “Combining Simple Motion Measurement, Lean Analysis Technique and Historical Data Review for Countering Negative Labor Cost Variance: A Case Study.” International Journal of Engineering Business Management 13. https://doi.org/10.1177/18479790211023617.
   Web of Science ®Google Scholar
• Almström, P., and M. Winroth. 2010. “Why Is There a Mismatch Between Operation Times in the Planning Systems and the Times in Reality.” International Conference on Advances in Production Management Systems (APMS) 2010, Cernobbio, Italy.
   Google Scholar
• Amadori, A., M. Altendeitering, and B. Otto. 2020. “Challenges of Data Management in Industry 4.0: A Single Case Study of the Material Retrieval Process.” The 23rd International Conference on Business Information Systems (BIS) 2020, Colorado Springs, CO, USA.
   Google Scholar
• Arshad, M., C. K. Yu, A. Qadir, W. Ahmad, and M. Rafique. 2022. “The Impact of Big Data Analytics on Organizational Sustainability: The Influencing Factors of Autonomous Research and Development and Absorptive Capacity.” International Journal of Engineering Business Management 14. https://doi.org/10.1177/18479790221141537.
   Web of Science ®Google Scholar
• Batini, C., C. Cappiello, C. Francalanci, and A. Maurino. 2009. “Methodologies for Data Quality Assessment and Improvement.” ACM Computing Surveys 41 (3): 629–667. https://doi.org/10.1145/1541880.1541883.
   Web of Science ®Google Scholar
• Batini, C., and M. Scannapieco. 2016. Data and Information Quality. Cham, Switzerland: Springer International Publishing.
   Google Scholar
• Bega, M., P. Sapel, F. Ercan, T. Schramm, M. Spitz, B. Kuhlenkötter, and C. Hopmann. 2023. “Extension of Value Stream Mapping 4.0 for Comprehensive Identification of Data and Information Flows within the Manufacturing Domain.” Production Engineering 17 (6): 915–927. https://doi.org/10.1007/s11740-023-01207-5.
   Google Scholar
• Bi, Z., C. W. J. Zhang, C. Wu, and L. Li. 2022. “New Digital Triad (DT-II) Concept for Lifecycle Information Integration of Sustainable Manufacturing Systems.” Journal of Industrial Information Integration 26. https://doi.org/10.1016/j.jii.2021.100316.
   Web of Science ®Google Scholar
• Buer, S.-V., G. I. Fragapane, and J. O. Strandhagen. 2018. “The Data-Driven Process Improvement Cycle: Using Digitalization for Continuous Improvement.” IFAC-Papersonline 51 (11): 1035–1040. https://doi.org/10.1016/j.ifacol.2018.08.471.
   Google Scholar
• Buer, S.-V., J. Wessel Strandhagen, M. Semini, and J. Ola Strandhagen. 2021. “The Digitalization of Manufacturing: Investigating the Impact of Production Environment and Company Size.” Journal of Manufacturing Technology Management 32 (3): 621–645. https://doi.org/10.1108/jmtm-05-2019-0174.
   Web of Science ®Google Scholar
• Busert, T., and A. Fay. 2021. “Information Quality Focused Value Stream Mapping for the Coordination and Control of Production Processes.” International Journal of Production Research 59 (15): 4559–4578. https://doi.org/10.1080/00207543.2020.1766720.
   Web of Science ®Google Scholar
• Cai, M., Y. Lin, B. Han, C. Liu, and W. Zhang. 2017. “On a Simple and Efficient Approach to Probability Distribution Function Aggregation.” IEEE Transactions on Systems, Man, and Cybernetics: Systems 47 (9): 2444–2453. https://doi.org/10.1109/tsmc.2016.2531647.
   Web of Science ®Google Scholar
• Cao, L., and H. Zhu. 2013. “Normal Accidents: Data Quality Problems in ERP-Enabled Manufacturing.” Journal of Data and Information Quality 4 (3): 1–26. https://doi.org/10.1145/2458517.2458519.
   Google Scholar
• Chu, X., I. F. Ilyas, and P. Papotti. 2013. “Discovering Denial Constraints.” Proceedings of the VLDB Endowment 6 (13): 1498–1509. https://doi.org/10.14778/2536258.2536262.
   Google Scholar
• Cichy, C., and S. Rass. 2019. “An Overview of Data Quality Frameworks.” Institute of Electrical and Electronics Engineers Access 7:24634–24648. https://doi.org/10.1109/access.2019.2899751.
   Google Scholar
• Ebaid, A. 2019. “A Systems Approach to Rule-Based Data Cleaning.” Doctoral dissertation, Purdue University.
   Google Scholar
• Ehrlinger, L., and W. Woss. 2022. “A Survey of Data Quality Measurement and Monitoring Tools.” Frontiers in Big Data 5:850611. https://doi.org/10.3389/fdata.2022.850611.
   PubMedGoogle Scholar
• English, L. P. 1999. Improving Data Warehouse and Business Information Quality: Methods for Reducing Costs and Increasing Profits. New York: Wiley.
   Google Scholar
• Gao, Z.-Y., J.-M. Gao, F.-M. Chen, and G. U. Lin. 2009. “Estimation Method for Manufacturing Information Quality Based on Material Constraint Relationship.” Computer Integrated Manufacturing System 15 (1): 166–172.
   Google Scholar
• Ge, M., M. Helfert, and D. Jannach. 2011. “Information Quality Assessment: Validating Measurement Dimensions And Processes.” The 19th European Conference on Information Systems (ECIS) 2011, Helsinki, Finland.
   Google Scholar
• Goti, A., A. de la Calle, M. Gil, A. Errasti, P. Bom, and P. García-Bringas. 2018. “Development and Application of an Assessment Complement for Production System Audits Based on Data Quality, it Infrastructure, and Sustainability.” Sustainability 10 (12). https://doi.org/10.3390/su10124679.
   Google Scholar
• Günther, L. C., E. Colangelo, H. H. Wiendahl, and C. Bauer. 2019. “Data Quality Assessment for Improved Decision-Making a Methodology for Small and Medium-Sized Enterprises.” Procedia Manufacturing 29:583–591. https://doi.org/10.1016/j.promfg.2019.02.114.
   Google Scholar
• Haug, A. 2021. “Understanding the differences across data quality classifications: a literature review and guidelines for future research.” Industrial Management & Data Systems 121 (12): 2651–2671. https://doi.org/10.1108/imds-12-2020-0756.
   Web of Science ®Google Scholar
• Hevner, A., and S. Chatterjee. 2010. “Design Science Research in Information Systems.“ Design Research in Information Systems: Theory and Practice, 9–22. New York: Springer.
   Google Scholar
• Hevner, A. R., S. T. March, J. Park, and S. Ram. 2004. “Design Science in Information Systems Research.” MIS Quarterly 28 (1): 75–105. https://doi.org/10.1007/978-1-4419-5653-8_2.
   Web of Science ®Google Scholar
• Houitte, D. R., T. Boukherroub, D. Ameyed, and A. Moise. 2023. “Data Quality Challenges in Dashboard Development in Industry 4.0 Context: An Engineering-To-Order Manufacturing Case Study.” The CIGI Qualita MOSIM : Propulser la performance – Interconnectivité et collaboration dans un contexte d’intelligence artificielle, Trois-Rivières, QC, Canada.
   Google Scholar
• Jaskó, S., A. Skrop, T. Holczinger, T. Chován, and J. Abonyi. 2020. “Development of Manufacturing Execution Systems in Accordance with Industry 4.0 Requirements: A Review of Standard- and Ontology-Based Methodologies and Tools.” Computers in Industry 123. https://doi.org/10.1016/j.compind.2020.103300.
   Web of Science ®Google Scholar
• Katz-Haas, R., and Y. W. Lee. 2002. “Understanding Hidden Interdependencies Between Information and Organizational Processes in Practice.” The 7th International Conference on Information Quality (ICIQ) 2002, Cambridge, MA, USA.
   Google Scholar
• Król, D., and T. Czarnecki. 2021. “Testing for Data Quality Assessment: A Case Study from the Industry 4.0 Perspective.” The 13th International Conference on International Conference on Computational Collective Intelligence (ICCCI) 2021, Kallithea, Rhodes, Greece, 73–85.
   Google Scholar
• Lee, Y. W., D. M. Strong, B. K. Kahn, and R. Y. Wang. 2002. “AIMQ: A Methodology for Information Quality Assessment.” Information & Management 40 (2): 133–146. https://doi.org/10.1016/S0378-7206(02)00043-5.
   Web of Science ®Google Scholar
• Lewin, M., S. Voigtländer, and A. Fay. 2017. “Method for Process Modelling and Analysis with Regard to the Requirements of Industry 4.0: An Extension of the Value Stream Method.” the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China.
   Google Scholar
• Lindström, V., F. Persson, A. Pravin Chennai Viswanathan, and M. Rajendran. 2023. “Data Quality Issues in Production Planning and Control – Linkages to Smart PPC.” Computers in Industry 147. https://doi.org/10.1016/j.compind.2023.103871.
   Web of Science ®Google Scholar
• Li, L., T. Peng, and J. Kennedy. 2014. “A Rule Based Taxonomy of Dirty Data.” GSTF Journal on Computing (JoC) 1 (2). https://doi.org/10.5176/978-981-08-6308-1_d-035.
   Google Scholar
• Liu, C., G. Peng, Y. Kong, S. Li, and S. Chen. 2021. “Data Quality Affecting Big Data Analytics in Smart Factories: Research Themes, Issues and Methods.” Symmetry 13:8. https://doi.org/10.3390/sym13081440.
   Google Scholar
• Loshin, D. 2001. Enterprise Knowledge Management: The Data Quality Approach. San Francisco, CA, USA: Morgan Kaufmann.
   Google Scholar
• Madnick, S. E., R. Y. Wang, Y. W. Lee, and H. Zhu. 2009. “Overview and Framework for Data and Information Quality Research.” Journal of Data and Information Quality 1 (1): 1–22. https://doi.org/10.1145/1515693.1516680.
   Google Scholar
• Magnus, C. S. 2023. “Smart Factory Mapping and Design: Methodological Approaches.” Production Engineering 17 (5): 753–762. https://doi.org/10.1007/s11740-023-01193-8.
   Google Scholar
• Mantravadi, S., and C. Møller. 2019. “An Overview of Next-Generation Manufacturing Execution Systems: How Important Is MES for Industry 4.0?” Procedia Manufacturing 30:588–595. https://doi.org/10.1016/j.promfg.2019.02.083.
   Google Scholar
• Martin, N. L., A. Dér, C. Herrmann, and S. Thiede. 2020. “Assessment of Smart Manufacturing Solutions Based on Extended Value Stream Mapping.” Procedia CIRP 93:371–376. https://doi.org/10.1016/j.procir.2020.04.019.
   Google Scholar
• Mattioli, J., P.-O. Robic, and E. Jesson. 2022. “Information Quality: The Cornerstone for AI-Based Industry 4.0.” Procedia Computer Science 201:453–460. https://doi.org/10.1016/j.procs.2022.03.059.
   Google Scholar
• Meudt, T., J. Metternich, and E. Abele. 2017. “Value Stream Mapping 4.0: Holistic Examination of Value Stream and Information Logistics in Production.” CIRP Annals 66 (1): 413–416. https://doi.org/10.1016/j.cirp.2017.04.005.
   Web of Science ®Google Scholar
• Molenda, P., A. Jugenheimer, C. Haefner, O. Oechsle, and R. Karat. 2019. “Methodology for the Visualization, Analysis and Assessment of Information Processes in Manufacturing Companies.” Procedia CIRP 84:5–10. https://doi.org/10.1016/j.procir.2019.04.291.
   Google Scholar
• Muehlbauer, K., M. Wuennenberg, S. Meissner, and J. Fottner. 2022. “Data Driven Logistics-Oriented Value Stream Mapping 4.0: A Guideline for Practitioners.” IFAC-Papersonline 55 (16): 364–369. https://doi.org/10.1016/j.ifacol.2022.09.051.
   Google Scholar
• Ogbeyemi, A., W. Lin, F. Zhang, and W. Zhang. 2021. “Human Factors Among Workers in a Small Manufacturing Enterprise: A Case Study.” Enterprise Information Systems 15 (6): 888–908. https://doi.org/10.1080/17517575.2020.1829076.
   Web of Science ®Google Scholar
• Peffers, K., T. Tuunanen, M. A. Rothenberger, and S. Chatterjee. 2007. “A Design Science Research Methodology for Information Systems Research.” Journal of Management Information Systems 24 (3): 45–77. https://doi.org/10.2753/mis0742-1222240302.
   Web of Science ®Google Scholar
• Pipino, L. L., Y. W. Lee, and R. Y. Wang. 2002. “Data Quality Assessment.” Communications of the ACM 45 (4): 211–218. https://doi.org/10.1145/505248.506010.
   Google Scholar
• Pschybilla, T., and A. Homann. 2020. “Evaluation of End-To-End Process and Information Flow Analyses Through Digital Transformation in Mechanical Engineering.” Procedia CIRP 93:298–303. https://doi.org/10.1016/j.procir.2020.04.070.
   Google Scholar
• Rathore, M., S. A. S. Mazhar, D. Shukla, E. Bentafat, and S. Bakiras. 2021. “The Role of AI, Machine Learning, and Big Data in Digital Twinning: A Systematic Literature Review, Challenges, and Opportunities.” Institute of Electrical and Electronics Engineers Access 9:32030–32052. https://doi.org/10.1109/access.2021.3060863.
   Google Scholar
• Redman, T. C. 2005. “Measuring Data Accuracy: A Framework and Review.” Information Quality, 21–36. New York: Routledge.
   Google Scholar
• Reuter, C., and F. Brambring. 2016. “Improving Data Consistency in Production Control.” Procedia CIRP 41:51–56. https://doi.org/10.1016/j.procir.2015.12.116.
   Google Scholar
• Reuter, C., F. Brambring, J. Weirich, and A. Kleines. 2016. “Improving Data Consistency in Production Control by Adaptation of Data Mining Algorithms.” Procedia CIRP 56:545–550. https://doi.org/10.1016/j.procir.2016.10.107.
   Google Scholar
• Roh, P., A. Kunz, and K. Wegener. 2019. “Information Stream Mapping: Mapping, Analysing and Improving the Efficiency of Information Streams in Manufacturing Value Streams.” CIRP Journal of Manufacturing Science and Technology 25:1–13. https://doi.org/10.1016/j.cirpj.2019.04.004.
   Web of Science ®Google Scholar
• Ross, K. A., D. Srivastava, P. J. Stuckey, and S. Sudarshan. 1998. “Foundations of Aggregation Constraints.” Theoretical Computer Science 193 (1): 149–179. https://doi.org/10.1016/S0304-3975(97)00011-X.
   Web of Science ®Google Scholar
• Rother, M., and J. Shook. 2003. Learning to See: Value Stream Mapping to Add Value and Eliminate Muda. Brookline, MA, USA: Lean enterprise institute.
   Google Scholar
• Schuh, G., E. Rebentisch, M. Riesener, T. Ipers, C. Tönnes, and M. H. Jank. 2019. “Data Quality Program Management for Digital Shadows of Products.” Procedia CIRP 86:43–48. https://doi.org/10.1016/j.procir.2020.01.027.
   Google Scholar
• Serra, F., V. Peralta, A. Marotta, and P. Marcel. 2022. “Use of Context in Data Quality Management a Systematic Literature Review.” arXiv Preprint arXiv 2204 (10655): 1–40. https://doi.org/10.48550/arXiv.2204.10655.
   Google Scholar
• Shankaranarayanan, G., R. Y. Wang, and M. Ziad. 2000. “IP-MAP: Representing the Manufacture of an Information Product.” The 5th International Conference on Information Quality (ICIQ) 2000, Cambridge, MA, USA.
   Google Scholar
• Shinohara, A. C., E. H. D. R. da Silva, E. P. de Lima, F. Deschamps, and S. E. G. da Costa. 2017. “Critical Success Factors for Digital Manufacturing Implementation in the Context of Industry 4.0.” the IIE Annual Conference, Pittsburgh, PA, USA.
   Google Scholar
• Shojaeinasab, A., T. Charter, M. Jalayer, M. Khadivi, O. Ogunfowora, N. Raiyani, M. Yaghoubi, and H. Najjaran. 2022. “Intelligent Manufacturing Execution Systems: A Systematic Review.” Journal of Manufacturing Systems 62:503–522. https://doi.org/10.1016/j.jmsy.2022.01.004.
   Web of Science ®Google Scholar
• Sun, M., Z. Cai, and N. Zhao. 2023. “Design of Intelligent Manufacturing System Based on Digital Twin for Smart Shop Floors.” International Journal of Computer Integrated Manufacturing 36 (4): 542–566. https://doi.org/10.1080/0951192x.2022.2128212.
   Web of Science ®Google Scholar
• Timmerman, Y., and A. Bronselaer. 2019. “Measuring Data Quality in Information Systems Research.” Decision Support Systems 126. https://doi.org/10.1016/j.dss.2019.113138.
   Web of Science ®Google Scholar
• Tokola, H., C. Gröger, E. Järvenpää, and E. Niemi. 2016. “Designing Manufacturing Dashboards on the Basis of a Key Performance Indicator Survey.” Procedia CIRP 57:619–624. https://doi.org/10.1016/j.procir.2016.11.107.
   Google Scholar
• Wang, R. Y. 1998. “A Product Perspective on Total Data Quality Management.” Communications of the ACM 41 (2): 58–65. https://doi.org/10.1145/269012.269022.
   Web of Science ®Google Scholar
• Wang, T.-Y., and H.-C. Pan. 2011. “Improving the OEE and UPH Data Quality by Automated Data Collection for the Semiconductor Assembly Industry.” Expert Systems with Applications 38 (5): 5764–5773. https://doi.org/10.1016/j.eswa.2010.10.056.
   Web of Science ®Google Scholar
• Wang, R. Y., and D. M. Strong. 1996. “Beyond Accuracy: What Data Quality Means to Data Consumers.” Journal of Management Information Systems 12 (4): 5–34. https://doi.org/10.1080/07421222.1996.11518099.
   Google Scholar
• Wang, K. Q., S. R. Tong, L. Roucoules, and B. Eynard. 2008. “Analysis of Data Quality and Information Quality Problems in Digital Manufacturing.” The 2008 4th IEEE International Conference on Management of Innovation and Technology, Bangkok, Thailand.
   Google Scholar
• Williams, D., and H. Tang. 2020. “Data Quality Management for Industry 4.0: A Survey.” Software Quality Professional 22 (2): 26–35.
   Google Scholar
• Woodall, P., A. Koronios, J. Gao, A. K. Parlikad, and E. George. 2012. “An Investigation into Data Quality Root Cause Analysis.” The 17th International Conference on Information Quality (ICIQ) 2012, Paris, France.
   Google Scholar
• Zhang, W. J., and J. W. Wang. 2016. “Design Theory and Methodology for Enterprise Systems.” Enterprise Information Systems 10 (3): 245–248. https://doi.org/10.1080/17517575.2015.1080860.
   Web of Science ®Google Scholar
• Zhang, W. J., J. W. Wang, and Y. Lin. 2019. “Integrated Design and Operation Management for Enterprise Systems.” Enterprise Information Systems 13 (4): 424–429. https://doi.org/10.1080/17517575.2019.1597169.
   Web of Science ®Google Scholar
• Zong, W., F. Wu, and P. P. Feng. 2019. “Improving Data Quality During ERP Implementation Based on Information Product Map.” Enterprise Information Systems 13 (9): 1275–1291. https://doi.org/10.1080/17517575.2019.1644669.
   Web of Science ®Google Scholar