Feasibility of Najran rocks crushing waste as manufactured sand in the sustainable concrete industry in the Kingdom of Saudi Arabia

References

• Abd El Aal, A., G. M. Abdullah, S. T. Qadri, A. Z. Abotalib, and A. Othman. 2022. “Advances on Concrete Strength Properties After Adding Polypropylene Fibers from Health Personal Protective Equipment (PPE) of COVID-19: Implication on Waste Management and Sustainable Environment.” Physics and Chemistry of the Earth, Parts A/B/C 128:103260. https://doi.org/10.1016/j.pce.2022.103260.
   PubMed Web of Science ®Google Scholar
• Abd El Aal, A., G. Abdullah, A. E. Radwan, S. H. Ali, A. Wahid, N. Shoukat, M. Zakhera, and h. Moftah. 2023. “Experimental Study of the Influence of the Degree of Saturation on Physical and Mechanical Properties of Carbonate Rocks in the Jurassic Tuwaiq Mountain Formation (Saudi Arabia).” Geological Journal. https://doi.org/10.1002/gj.4830.
   Web of Science ®Google Scholar
• Ahn, N., and D. W. Fowler, 2001. “An Experimental Study on the Guidelines for Using Higher Contents of Aggregate Micro Fines in Portland Cement Concrete”. Austin, USA: International Centre for Aggregate Research. Research Report No. ICAR 102-1F.
   Google Scholar
• Amulya, G., A. A. B. Moghal, and A. Almajed. 2021. “A State-Of-The-Art Review on Suitability of Granite Dust as a Sustainable Additive for Geotechnical Applications.” Crystals 11 (12): 1526. https://doi.org/10.3390/cryst11121526.
   Web of Science ®Google Scholar
• Anh, L. H., F. C. Mihai, A. Belousova, R. Kucera, K. D. Oswald, W. Riedel, N. A. Sekar, and P. Schneider. 2023. “Life Cycle Assessment of River Sand and Aggregates Alternatives in Concrete.” Materials 16 (5): 2064. https://doi.org/10.3390/ma16052064.
   PubMed Web of Science ®Google Scholar
• Awasare, M. V., M. R. Mahatme, A. A. Patel, M. V. Thorwat, M. P. Patil, and M. Ab. 2019. “An Experimental Study on Effect of Replacing Natural Sand by Artificial Sand on Properties of Concrete.” International Research Journal of Engineering & Technology 6 (3): 6540–6546.
   Google Scholar
• Bahoria, B. V., D. K. Parbat, and P. B. Naganaik. 2013. “Replacement of Natural Sand in Concrete by Waste Products: A State of Art.” Journal of Environmental Research and Development 7 (4A): 1651.
   Google Scholar
• Baikerikar, A. 2014. “A Review on Green Concrete.” Journal of Emerging Technologies and Innovative Research 1 (6): 472–474.
   Google Scholar
• Bajad, M. N., and S. Sakhare. 2018. “Influence of Artificial Sand on the Properties of Concrete and Mortar.” International Journal of Civil Engineering and Technology 9 (1): 447–454.
   Google Scholar
• Benahsina, A., Y. El Haloui, Y. Taha, M. Elomari, and M. A. Bennouna. 2022. “Natural Sand Substitution by Copper Mine Waste Rocks for Concrete Manufacturing.” Journal of Building Engineering 47:103817. https://doi.org/10.1016/j.jobe.2021.103817.
   Web of Science ®Google Scholar
• Birch, W., and H. Datson2008. “Reducing the Environmental Effects of Aggregate Quarrying: Dust, Noise & Vibration”. Accessed November 5, 2021. https://miningandblasting.files.wordpress.com/2009/09/blast_dust_and_noise_control.pdf
   Google Scholar
• BS 1881-102:1983 Testing concrete, Method for determination of slump.
   Google Scholar
• BS 1881-116:1983 Testing concrete, Method for determination of compressive strength of concrete cubes.
   Google Scholar
• BS 1881-117:1983 Testing concrete, Method for determination of tensile splitting strength.
   Google Scholar
• BS 1881-118:1983 Testing concrete, Method for determination of flexural strength.
   Google Scholar
• BS 1881-203:1986 Testing concrete, Recommendations for measurement of velocity of ultrasonic pulses in concrete.
   Google Scholar
• BS 812-103.1:1985 Determination of particle size distribution – Sieve tests.
   Google Scholar
• BS 812 - 105.1:1989 Determination of particle shape. Flakiness index.
   Google Scholar
• BS 812- 109: 1990 Determination of moisture content.
   Google Scholar
• BS 812 - 2:1989 Determination of the bulk particle density.
   Google Scholar
• BS 882- 1992 (w/d 2004) Specification for aggregate from natural sources for concrete.
   Google Scholar
• BS EN 12620:2002+A1: 2008 Aggregate for concrete.
   Google Scholar
• Celik, T., and K. Marar. 1996. “Effects of Crushed Stone Dust on Some Properties of Concrete.” Cement and Concrete Research 26 (7): 1121–1130. https://doi.org/10.1016/0008-8846(96)00078-6.
   Web of Science ®Google Scholar
• Chitkeshwar, A. K., and P. L. Naktode. 2022. “Concrete with Rock Quarry Dust with Partial Replacement of Fine Aggregate.” Materials Today: Proceedings 62:6455–6459. https://doi.org/10.1016/j.matpr.2022.04.195.
   Google Scholar
• de Azevedo, Afonso Rangel Garces, M. T. Marvila, L. da Silva Barroso, E. B. Zanelato, J. Alexandre, G. de Castro Xavier, and S. N. Monteiro. 2019. “Effect of Granite Residue Incorporation on the Behavior of Mortar.” Materials 12 (9): 1449. MDPI, Published online 2019 May5. https://doi.org/10.3390/ma12091449.
   PubMed Web of Science ®Google Scholar
• Donza, H., O. Cabrera, and E. F. Irassar. 2002. “High-Strength Concrete with Different Fine Aggregate.” Cement and Concrete Research 32 (11): 1755–1761. https://doi.org/10.1016/S0008-8846(02)00860-8.
   Web of Science ®Google Scholar
• Febin, G. K., A. Abhirami, A. K. Vineetha, V. Manisha, R. Ramkrishnan, D. Sathyan, and K. M. Mini. 2019. “Strength and Durability Properties of Quarry Dust Powder Incorporated Concrete Blocks.” Construction and Building Materials 228:116793. https://doi.org/10.1016/j.conbuildmat.2019.116793.
   Web of Science ®Google Scholar
• Garg, C., and A. Jain. 2014. “Green Concrete: Efficient & Eco-Friendly Construction Materials.” International Journal for Research and Engineering Technology 2 (2): 259–264.
   Google Scholar
• Hameed, M. S., and A. S. S. Sekar. 2009. “Properties of Green Concrete Containing Quarry Rock Dust and Marble Sludge Powder as Fine Aggregate.” ARPN Journal of Engineering Applied Science 4 (4): 83–89.
   Google Scholar
• Harrison, D. J., D. Wilson, P. J. Henney, and J. M. Hudson 2000. “Crushed Rock Sand in South Wales: A Reconnaissance Survey”. Technical Report No: WF/00/003. British Geological Survey: Nottingham, UK, pp. 1–28.https://www.kafkagranite.com/quality-control-101-what-is-absorption.
   Google Scholar
• Hudson, B. 1997. “Manufactured Sand for Concrete”. In Proceedings of the 5th Annual ICAR Symposium, Austin, USA.
   Google Scholar
• Jackson, N. M., and R. H. Brown 1996. “Use of Higher Fines Contents in Portland Cement Concrete”. In Proceedings of the 4th Annual ICAR Symposium.
   Google Scholar
• Kala, Felix. 2013 May. “Effect of Granite Powder on Strength Properties of Concrete.” The International Journal of Engineering and Science 2 (12): 36–50.
   Google Scholar
• Kazmi, D., M. Serati, D. J. Williams, S. Qasim, and Y. P. Cheng. 2021. “The Potential Use of Crushed Waste Glass as a Sustainable Alternative to Natural and Manufactured Sand in Geotechnical Applications.” Journal of Cleaner Production 284:124762. https://doi.org/10.1016/j.jclepro.2020.124762.
   Web of Science ®Google Scholar
• Kenai, S., B. Menadi, A. Attar, and J. Khatib 2008. “Effect of Crushed Limestone Fines on Strength of Mortar and Durability of Concrete”. In Proceedings of International Conference on Construction and Building Technology 2008, Kuala Lumpur, Malaysia.
   Google Scholar
• Lai, M., K. Wu, X. Ou, M. Zeng, C. Li, and J. C. M. Ho. 2022. “Effect of Concrete Wet Packing Density on the Uni‐Axial Strength of Manufactured Sand CFST Columns.” Structural Concrete 23 (4): 2615–2629. https://doi.org/10.1002/suco.202100280.
   Web of Science ®Google Scholar
• Li, B., J. Wang, and M. Zhou. 2009. “Effect of Limestone Fines Content in Manufactured Sand on Durability of Low- and High-Strength Concretes.” Construction and Building Materials 23 (8): 2846–2850. https://doi.org/10.1016/j.conbuildmat.2009.02.033.
   Web of Science ®Google Scholar
• Li, B., M. Zhou, and J. Wang. 2011. “Effect of the Methylene Blue Value of Manufactured Sand on Performances of Concrete.” Journal of Advanced Concrete Technology 9 (2): 127–132. https://doi.org/10.3151/jact.9.127.
   Web of Science ®Google Scholar
• Lombi, E., R. E. Hamon, G. Wieshammer, M. J. McLaughlin, and S. P. McGrath. 2004. “Assessment of the Use of Industrial By‐Products to Remediate a Copper‐And Arsenic‐Contaminated Soil.” Journal of Environmental Quality 33 (3): 902–910. https://doi.org/10.2134/jeq2004.0902.
   PubMed Web of Science ®Google Scholar
• Makkar, H. P. S. ”Applications of the in vitro gas method in the evaluation of feed resources, and enhancement of nutritional value of tannin-rich tree/browse leaves and agro-industrial by-products[(AFRA - African Regional Co-operative Agreement for Research, Development and Training related to Nuclear Science and Technology)]”. IAEA.Proceedings of the final review meeting of an IAEA Technical Co-operation Regional AFRA Project, 169.
   Google Scholar
• Mane, K. M., D. K. Kulkarni, and A. A. Joshi. 2017. “Strength and workability of concrete with manufactured sand.” Int J Eng Res Technol 10 (1).
   Google Scholar
• Manning, D. 2004. “Exploitation and Use of Quarry Fines. Mineral Solutions Ltd”. Report No. 087/MIST2/DACM/01.
   Google Scholar
• Marek, C. R. 1992. Realistic Specifications for Manufactured Sand. In: Proceedings of Materials Performance. Atlanta, Georgia, pp. 245–260.
   Google Scholar
• Marek, C. R. 1995. Importance of Fine Aggregate Shape and Grading on Properties of Concrete. In Proceedings of the 3rd Annual ICAR Symposium, Austin, USA.
   Google Scholar
• Martins, G. C., E. S. Penido, I. F. S. Alvarenga, J. C. Teodoro, M. L. Bianchi, and L. R. G. Guilherme. 2018. “Amending Potential of Organic and Industrial By-Products Applied to Heavy Metal-Rich Mining Soils.” Ecotoxicology and Environmental Safety 162:581–590. https://doi.org/10.1016/j.ecoenv.2018.07.040.
   PubMed Web of Science ®Google Scholar
• Martins Pilegis, M., D. Gardner, and R. Lark. 2016. “An Investigation into the Use of Manufactured Sand as a 100% Replacement for Fine Aggregate in Concrete.” Materials 9 (6): 440. https://doi.org/10.3390/ma9060440.
   PubMed Web of Science ®Google Scholar
• Needhidasan, S., B. Ramesh, and S. Prabu. 2020. “Experimental Study on Use of E-Waste Plastics as Coarse Aggregate in Concrete with Manufactured Sand.” Materials Today: Proceedings 22:715–721. https://doi.org/10.1016/j.matpr.2019.10.006.
   Google Scholar
• Neville, A. M., and J. J. Brooks, 2010, “Concrete Technology”, 2nd edition, British Library.
   Google Scholar
• Newman, J., and B. S. Choo, eds. 2003. Advanced Concrete Technology. Amsterdam: Elsevier.
   Google Scholar
• Nicholson, P. G. 2014. Soil Improvement and Ground Modification Methods. Butterworth-Heinemann. https://doi.org/10.1016/B978-0-12-408076-8.00012-1.
   Google Scholar
• Özturan, T., and C. Cecen. 1997. “Effect of Coarse Aggregate Type on Mechanical Properties of Concretes with Different Strengths.” Cement and Concrete Research 27 (2): 165–170. https://doi.org/10.1016/S0008-8846(97)00006-9.
   Web of Science ®Google Scholar
• Pilegis, Martins. 2014. “Structural and geo-environmental applications of waste quarry dust.” PhD Thesis, Cardiff University.
   Google Scholar
• Ramasubramani, R., and K. Gunasekaran. 2022. “Sustainable Replacement Materials for Concrete Production from Renewable Resources and Waste on Interfacial Bond Properties.” Innovative Infrastructure Solutions 7 (4): 266. https://doi.org/10.1007/s41062-022-00869-x.
   Web of Science ®Google Scholar
• Rana, A., P. Kalla, H. K. Verma, and J. K. Mohnot. 2016. “Recycling of Dimensional Stone Waste in Concrete: A Review.” Journal of Cleaner Production 135:312–331. https://doi.org/10.1016/j.jclepro.2016.06.126.
   Web of Science ®Google Scholar
• SADEK, Dina M., Walid S. EL-SAYED, Ashraf M.A HENIEGAL, and Ayman S. MOHAMED. 2013. “Utilization of Solid Wastes in Cement Bricks for an Environmental Beneficial”. International Journal of Engineering. 3. Fascicule ISSN 1584 – 2673
   Google Scholar
• Shen, W., J. Wu, X. Du, Z. Li, D. Wu, J. Sun, and D. Zhao. 2022. “Cleaner Production of High-Quality Manufactured Sand and Ecological Utilization of Recycled Stone Powder in Concrete.” Journal of Cleaner Production 375:134146. https://doi.org/10.1016/j.jclepro.2022.134146.
   Web of Science ®Google Scholar
• Sridharan, A., T. G. Soosan, and B. T. Jose. 2006. “Shear strength studies on soil-quarry dust mixtures.” Geotech Geol Eng 24:1163–1179. https://doi.org/10.1007/s10706-005-1216-9.
   Google Scholar
• Supekar, V. R., and P. D. Kumbhar. 2012. “Properties of Concrete by Replacement of Natural Sand with Artificial Sand.” International Journal of Engineering Research & Technology 1 (7): 6. htt ps//wa.me/919354587773.
   Google Scholar
• Topçu, B., and A. Uurlu. 2003. “Effect of the Use of Mineral Filler on the Properties of Concrete.” Cement and Concrete Research 33 (7): 1071–1075. https://doi.org/10.1016/S0008-8846(03)00015-2.
   Web of Science ®Google Scholar
• Ulsen, C., H. Kahn, G. Hawlitschek, E. A. Masini, S. C. Angulo, and V. M. John. 2013. “Production of Recycled Sand from Construction and Demolition Waste.” Construction and Building Materials 40:1168–1173. https://doi.org/10.1016/j.conbuildmat.2012.02.004.
   Web of Science ®Google Scholar
• Wang, Y., Z. Jin, S. Liu, L. Yang, and S. Luo. 2013. “Physical Filling Effect of Aggregate Micro Fines in Cement Concrete.” Construction and Building Materials 41:812–814. https://doi.org/10.1016/j.conbuildmat.2012.12.037.
   Web of Science ®Google Scholar
• Yang, H., D. Liang, Z. Deng, and Y. Qin. 2018. “Effect of Limestone Powder in Manufactured Sand on the Hydration Products and Microstructure of Recycled Aggregate Concrete.” Construction and Building Materials 188:1045–1049. https://doi.org/10.1016/j.conbuildmat.2018.08.147.
   Web of Science ®Google Scholar
• Zhang, J., D. Li, and Y. Wang. 2020. “Toward Intelligent Construction: Prediction of Mechanical Properties of Manufactured-Sand Concrete Using Tree-Based Models.” Journal of Cleaner Production 258:120665. https://doi.org/10.1016/j.jclepro.2020.120665.
   Web of Science ®Google Scholar