Evaluation of fitting to hyperbolic functions of load transfer curves for piles in granular soil profiles

References

• Abdlrahem, M. A., and M. H. El Naggar. 2020. “Axial Performance of Micropile Groups in Cohesionless Soil from Full-Scale Tests.” Canadian Geotechnical Journal 57 (7): 1006–1024. https://doi.org/10.1139/cgj-2018-0695.
   Web of Science ®Google Scholar
• Bohn, C., A. L. Santos, and R. Frank. 2016. “Development of Axial Pile Load Transfer Curves Based on Instrumented Load Tests.” Journal of Geotechnical and Geoenvironmental Engineering 143 (1): 04016081. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001579.
   Web of Science ®Google Scholar
• Bradshaw, A. S., and C. D. P. Baxter. 2006 “Design and Construction of Driven Pile Foundations–Lessons Learned on the Central Artery/Tunnel Project.” No. FHWAHRT-05-159, McLean, Virginia
   Google Scholar
• Briaud, J. L., L. M. Tucker, and E. Ng. 1989. “Axially Loaded 5 Pile Group and Single Pile in Sand.” Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering, Rio de Janeiro, Vol. 2, 1121–1124.
   Google Scholar
• Cerqueira Junior, E., and A. S. Moura. 2022. “Evaluation of the Group Effect’s Simulation on the Bearing Capacity of Bored Piles in Granular Soil, Using Load Transfer Functions.” Geotechnical and Geological Engineering 40 (7): 3393–3412. https://doi.org/10.1007/s10706-022-02100-1.
   Web of Science ®Google Scholar
• Elsamny, M. K., M. A. Ibrahim, S. A. Gad, and M. F. Abd-Mageed. 2017. “Experimental Evaluation of Bearing Capacity and Behaviour of Single Pile and Pile Group in Cohesionless Soil.” International Journal of Engineering Research & Technology (IJERT) 6 (5): 695–704.
   Google Scholar
• Fellenius, B. H., W. G. Brusey, and F. Pepe. 2000. “Soil Set-Up, Variable Concrete Modulus, and Residual Load for Tapered Instrumented Piles in Sand.” Proceedings of the ASCE Specialty Conference on Performance Confirmation of Constructed Geotechnical Facilities, Amherst, 98–114. https://doi.org/10.1061/40486(300)6
   Google Scholar
• Fleming, W. G. K. 1992. “A New Method for Single Pile Settlement Prediction and Analysis.” Géotechnique 42 (3): 411–425. https://doi.org/10.1680/geot.1992.42.3.411.
   Web of Science ®Google Scholar
• Gavin, K. G., D. Cadogan, and P. Casey. 2009. “Shaft Capacity of Continuous Flight Auger Piles in Sand.” Journal of Geotechnical and Geoenvironmental Engineering 135 (6): 790–798. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000073.
   Web of Science ®Google Scholar
• Gavin, K., P. Doherty, and A. Tolooiyan. 2014. “Field Investigation of the Axial Resistance of Helical Piles in Dense Sand.” Canadian Geotechnical Journal 51 (11): 1343–1354. https://doi.org/10.1139/cgj-2012-0463.
   Web of Science ®Google Scholar
• Gavin, K. G., and B. C. O’Kelly. 2007. “Effect of Friction Fatigue on Piles Capacity in Dense Sand.” Journal of Geotechnical and Geoenvironmental Engineering 133 (1): 63–71. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:1(63).
   Web of Science ®Google Scholar
• Gomes Filho, F. V. C., and A. S. Moura. 2021. “Proposal for Considering the Group Effect in the Prediction of Settlements in Pile Groups Through Load Transfer Methods.” Soils and Rocks 44 (2): e2021061320. https://doi.org/10.28927/SR.2021.061320.
   Web of Science ®Google Scholar
• Gregersen, O. S., G. Aas, and E. Dibiagio. 1973. “Load Tests on Friction Piles in Loose Sand.” Proceedings 8th International Conference on Soil Mechanics and Foundation Engineering 2:109–117.
   Google Scholar
• Ismael, N. F. 2001. “Axial Load Tests on Bored Piles and Pile Groups in Cemented Sands.” Journal of Geotechnical and Geoenvironmental Engineering 127 (9): 766–773. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:9(766).
   Web of Science ®Google Scholar
• Krasiński, A. 2011. “Advanced Field Investigations of Screw Piles and Columns / Zaawansowane Badania Terenowe Pali I Kolumn Wkrecanych.” Archives of Civil Engineering 57 (1): 45–57. https://doi.org/10.2478/v.10169-011-0005-5.
   Google Scholar
• Krasiński, A. 2012. “Proposal for Calculating the Bearing Capacity of Screw Displacement Piles in Non-Cohesive Soils Based on CPT Results.” Studia Geotechnica et Mechanica 34 (4): 41–51. https://doi.org/10.2478/sgm041204.
   Google Scholar
• Liu, J., H. B. Xiao, J. Tang, and Q. S. Li. 2004. “Analysis of Load-Transfer of Single Pile in Layered Soil.” Computers and Geotechnics 31 (2): 127–135. https://doi.org/10.1016/j.compgeo.2004.01.001.
   Web of Science ®Google Scholar
• Long, P. D. 1993. Footings with settlement-reducing piles in non-cohesive soil 43. Linkoping: Swedish Geotechnical Institute.
   Google Scholar
• Mayne, P. W., and D. E. Harris. 1993. “Axial Load-Displacement Behavior of Drilled Shaft Foundations in Piedmont Residium.” Report prepared for FHWA, Virginia: McLean
   Google Scholar
• Mylonakis, G., and G. Gazetas. 1998. “Settlement and Additional Internal Forces of Grouped Piles in Layered Soil.” Géotechnique 48 (1): 55–72. https://doi.org/10.1680/geot.1998.48.1.55.
   Web of Science ®Google Scholar
• Norkus, A., and V. Martinkus. 2019. “Experimental Study on Bearing Resistance of Short Displacement Pile Groups in Dense Sands.” Journal of Civil Engineering and Management 25 (6): 551–558. https://doi.org/10.3846/jcem.2019.10403.
   Web of Science ®Google Scholar
• Nottingham, L. C. 1975. “Use of quasi-static friction cone penetrometer data to predict load capacity of displacement piles.” Ph.D. thesis, University of Florida
   Google Scholar
• Paik, K., R. Salgado, J. Lee, and B. Kim. 2003. “Behavior of Open- and Closed-Ended Piles Driven into Sands.” Journal of Geotechnical and Geoenvironmental Engineering 129 (4): 296–306. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:4(296).
   Web of Science ®Google Scholar
• Pan, D. D., Q. Q. Zhang, S. W. Liu, and S. M. Zhang. 2017. “Analysis on Response Prediction of a Single Pile and Pile Groups Based on the Runge-Kutta Method.” KSCE Journal of Civil Engineering 22 (1): 92–100. https://doi.org/10.1007/s12205-017-0578-x.
   Web of Science ®Google Scholar
• Randolph, M. F., and C. P. Wroth. 1979. “An Analysis of the Vertical Deformation of Pile Groups.” Geotechnique 29 (4): 423–439. https://doi.org/10.1680/geot.1979.29.4.423.
   Web of Science ®Google Scholar
• Reese, L. C., and M. W. O’Neill. 1988. Drilled Shafts: Construction Procedures and Design Methods FHWA-HI-88-042. Washington, DC: Federal Highway Administration (FHWA).
   Google Scholar
• Soares, W. C., R. Q. Coutinho, and R. P. Cunha. 2021. “Behaviour of Instrumented Hollow Auger Pile Groups in Sandy Soil.” Geotechnical and Geological Engineering 39 (8): 5599–5618. https://doi.org/10.1007/s10706-021-01847-3.
   Web of Science ®Google Scholar
• Tavenas, F. A. 1971. “Load Tests Results on Friction Piles in Sand.” Canadian Geotechnical Journal 8 (1): 7–22. https://doi.org/10.1139/t71-002.
   Google Scholar
• Tucker, L. M., and J. L. Briaud. 1988. “Analysis of the Pile Load Test Program at the Lock and Dam 26 Replacement Project.” Final Report. St. Louis (MO): US Army Corps of Engineers
   Google Scholar
• Zhang, Q. Q., S. C. Li, F. Y. Liang, M. Yang, and Q. Zhang. 2014. “Simplified Method for Settlement Prediction of Single Pile and Pile Group Using a Hyperbolic Model.” International Journal of Civil Engineering 12 (2): 146–159.
   Google Scholar
• Zhang, Q. Q., S. W. Liu, S. M. Zhang, and K. Wang. 2016. “Simplified Non-Linear Approaches for Response of a Single Pile and Pile Groups Considering Progressive Deformation of Pile-Soil System.” Soils and Foundations 56 (3): 473–484. https://doi.org/10.1016/j.sandf.2016.04.013.
   Web of Science ®Google Scholar
• Zhang, Q. Q., and Z. M. Zhang. 2012. “Simplified Calculation Approach for Settlement of Single Pile and Pile Groups.” Journal of Computing in Civil Engineering 26 (6): 750–758. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000167.
   Web of Science ®Google Scholar