Fabrication and properties of SiO_2f/SiO₂ composite ceramic based on stereolithography technology

References

• Zhang XY, Li N, Lan T, et al. In-situ reaction synthesis of porous Si2N2O-Si3N4 multiphase ceramics with low dielectric constant via silica poly-hollow microspheres. Ceram Int. 2017;43(5):4235–4240. doi: 10.1016/j.ceramint.2016.12.058
   Web of Science ®Google Scholar
• Chun S, Kim T, Ye B, et al. Penetrated surface characteristics of cement - mixed sand in powder bed 3D printing. J Asian Ceram Soc. 2022;10(2):306–313. doi: 10.1080/21870764.2021.2024734
   Web of Science ®Google Scholar
• Mamatha S, Biswas P, Ramavath P, et al. Effect of parameters on 3D printing of alumina ceramics and evaluation of properties of sintered parts. J Asian Ceram Soc. 2021;9(3):858–864. doi: 10.1080/21870764.2021.1920159
   Web of Science ®Google Scholar
• Man Y, Ding G, Xu L, et al. A review on porous ceramics with hierarchical pore structure by 3D printing-based combined route. J Asian Ceram Soc. 2021;9(4):1377–1389. doi: 10.1080/21870764.2021.1981571
   Web of Science ®Google Scholar
• Guo W, Liu C, Bu W, et al. 3D printing of polylactic acid/boron nitride bone scaffolds: mechanical properties, biomineralization ability and cell responses. Ceram Int. 2023;49(15):25886–25898. doi: 10.1016/j.ceramint.2023.05.137
   Web of Science ®Google Scholar
• Yang P, Sun Z, Huang S, et al. J Asian Ceram Soc. 2022;10(1):69–82. doi: 10.1080/21870764.2021.2009096
   Web of Science ®Google Scholar
• Li Y, Wang S, Wang M, et al. J Asian Ceram Soc. 2021;9(2):727–732. doi: 10.1080/21870764.2021.1913912
   Web of Science ®Google Scholar
• Yang P, Sun Z, Huang S, et al. J Asian Ceram Soc. 2022;10(1):69–82. doi: 10.1080/21870764.2021.2009096
   Web of Science ®Google Scholar
• Ismail N, Saat N, Zaid M. Effect of soda lime silica glass doping on ZnO varistor ceramics: dry milling method. J Asian Ceram Soc. 2020;8(3):909–914. doi: 10.1080/21870764.2020.1793472
   Web of Science ®Google Scholar
• Lu D, Cheng S, Zhang L, et al. Study on growth factors of SiC whisker in situ in SiCW/SiC composites based on selective laser sintering technology. Ceram Int. 2023;49(7):10673–10681. doi: 10.1016/j.ceramint.2022.11.257
   Web of Science ®Google Scholar
• Ratsimba A, Zerrouki A, Tessier-Doyen N, et al. Densification behaviour and three-dimensional printing of Y2O3 ceramic powder by selective laser sintering. Ceram Int. 2021;47(6):7465–7474. doi: 10.1016/j.ceramint.2020.11.087
   Web of Science ®Google Scholar
• Li W, Liu W, Qi F, et al. Determination of micro-mechanical properties of additive manufactured alumina ceramics by nanoindentation and scratching. Ceram Int. 2019;45(8):10612–10618. doi: 10.1016/j.ceramint.2019.02.128
   Web of Science ®Google Scholar
• Lia Y, Hu Y, Cong W, et al. Additive manufacturing of alumina using laser engineered net shaping: effects of deposition variables. Ceram Int. 2017;43(10):7768–7775. doi: 10.1016/j.ceramint.2017.03.085
   Web of Science ®Google Scholar
• Bae CJ, Halloran JW. Integrally cored ceramic mold fabricated by ceramic stereolithography. Int J Appl Ceram Technol. 2011;8(6):1255–1262. doi: 10.1111/j.1744-7402.2010.02568.x
   Web of Science ®Google Scholar
• Sua CY, Wang JC, Chen DS, et al. Additive manufacturing of dental prosthesis using pristine and recycled zirconia solvent-based slurry stereolithography. Ceram Int. 2020;46(18):28701–28709. doi: 10.1016/j.ceramint.2020.08.030
   Web of Science ®Google Scholar
• Chen QH, Zou B, Lai QG, et al. A study on biosafety of HAP ceramic prepared by SLA-3D printing technology directly. J Mech Behav Biomed Mater. 2019;98:327–335. doi: 10.1016/j.jmbbm.2019.06.031
   PubMed Web of Science ®Google Scholar
• Tian Z, Yang Y, Wang Y, et al. Fabrication and properties of a high porosity h-BN–SiO2 ceramics fabricated by stereolithography-based 3D printing. Mater Lett. 2019;236:144–147. doi: 10.1016/j.matlet.2018.10.058
   Web of Science ®Google Scholar
• Wang M, Xie C, He R, et al. Polymer-derived silicon nitride ceramics by digital light processing based additive manufacturing. J Am Ceram Soc. 2019;102(9):5117–5126. doi: 10.1111/jace.16389
   Web of Science ®Google Scholar
• Song S, Gao Z, Xu H, et al. Rapid preparation and performance of degradable ceramic scaffolds based on stereolithography. J Asian Ceram Soc. 2022;10(1):58–68. doi: 10.1080/21870764.2021.2008102
   Web of Science ®Google Scholar
• Tao X, Zhang LY, Ma XH, et al. Preparation of a flexible high emissivity coating on quartz fiber fabric for thermal protection. Ceram Int. 2017;43(16):14292–14300. doi: 10.1016/j.ceramint.2017.07.181
   Web of Science ®Google Scholar
• Kindt JTK, Schmuttenmaer CA. Far-infrared dielectric properties of polar liquids probed by femtosecond terahertz pulse spectroscopy. J Phys Chem. 1996;100(24):10373–10379. doi: 10.1021/jp960141g
   Web of Science ®Google Scholar