Development and improvement of production process of MIM rocker arm

References

• N. H. Kamarudin, M. H. I. Ibrahim. Effect of immerse temperature and time on solvent debinding process of stainless steel 316L metal injection molding. Mater. Sci. Eng, 2017, 165, 012016.
   Google Scholar
• S. J. Yi, H. Q. Yin, K. Chen, D.-F. Khan, Q.-J. Zheng, X.-H. Qu. Microstructure and properties of nano-TiN modified Ti (C, N)-based cermets fabricated by powder injection molding and die pressing. Int. J. Min. Met. Mater, 2013, 20, 1115–1121.
   Web of Science ®Google Scholar
• K. Shin, Y. Heo, H. Park, S. Chang, B. Rhee. Development of metal plate with internal structure utilizing the metal injection molding (MIM) process. Materials (Basel), 2013, 6, 5878–5892.
   PubMed Web of Science ®Google Scholar
• R. Asmawi, M. H. I. Ibrahim, A. M. Amin, N. Mustafa. Solvent debinding of MIM parts in a polystyrene-palm oil based binder system. IOP Conf. Series.: Mater. Sci. Eng, 2016, 160, 012063.
   Google Scholar
• M. W. Wu, Z. K. Huang, C. F. Tseng, K.-S. Hwang. Microstructures, mechanical properties, and fracture behaviors of metal-injection molded 17-4PH stainless steel. Metals and Mater. Int., 2015, 21, 531–537.
   Web of Science ®Google Scholar
• N. H. M. Ali, I. Subuki, M. H. Ismail. Processing of injection moulded of synthesized HAp by single step wick-debinding and sintering. Adv. Mater. Res, 2015, 1113, 105–109.
   Google Scholar
• A. Hossain, I. A. Choudhury, N. Nahar, I. Hossain, A. B. Mamat. Experimental and theoretical investigation of powder–binder mixing mechanism for metal injection molding. Mater. Manufact. Process, 2015, 30, 41–46.
   Web of Science ®Google Scholar
• B. Jerald, M. Craig, S. Geoffrey. The main features and components of high performance MIM vacuum sintering furnace. Powder Metall. Technol, 2013, 31, 469–472.
   Google Scholar
• P. Wongpanit, S. Khanthsri, S. Puengboonsri, A. Manonukul. Effects of acrylic acid-grafted HDPE in HDPE-based binder on properties after injection and debinding in metal injection molding. Mater. Chem. Phys., 2014, 147, 238–246.
   Web of Science ®Google Scholar
• X. C. Xie, C. G. Lin, C. C. Jia, R. J. Cao. Effects of process parameters on quality of ultrafine WC/12Co injection molded compacts. Int. J. Refract. Metals Hard Mater., 2015, 48, 305–311.
   Web of Science ®Google Scholar
• X. F. Yang, J. H. Yang, X. W. Xu, Q.-C. Liu, Z.-P. Xie, W. Liu. Injection molding of ultra-fine Si3N4 powder for gas-pressure sintering. Int. J. Miner. Metall. Mater., 2015, 22, 654–659.
   Web of Science ®Google Scholar
• A. Páez-Pavón, A. Jiménez-Morales, T. G. Santos, L. Quintino, J. M. Torralba. Influence of thermal debinding on the final properties of Fe–Si soft magnetic alloys for metal injection molding (MIM). J. Magn. Magn. Mater., 2016, 416, 342–347.
   Web of Science ®Google Scholar
• Y. Ye, L. Qiao, J. Zheng, L. Jiang. Effect of microcrystalline wax on the solvent debinding of the Sr-ferrite ceramics prepared by powder injection molding. J. Eur. Ceram. Soc, 2016, 37, 2105–2114.
   Web of Science ®Google Scholar
• R. Javad, N. Muhamad, A. B. Sulong, H. Zakaria. Characterization of fabricated feedstock using nano powders and a water-soluble binder in micro metal injection molding. J. Nano Res., 2013, 23, 36–42.
   Web of Science ®Google Scholar
• J. Y. Fu. The viscosity model of Ti-6Al-4V feedstocks in metal powder injection molding. Appl. Mech. Mater., 2013, 275–277, 2161–2165.
   Google Scholar
• G. Chen, G. Wen, N. Edmonds, P. Cao. Water debinding behaviour of water soluble Ti-MIM feedstock. Powder Metall., 2015, 58, 220–227.
   Web of Science ®Google Scholar
• M. Wolff, J. G. Schaper, M. R. Suckert, M. Dahms, F. Feyerabend, T. Ebel, R. Willumeit-Römer, T. Klassen. Metal injection molding (MIM) of magnesium and its alloys. Metals Open Access Metall. J, 2016, 6, 118.
   Google Scholar
• R. M. German. Progress in titanium metal powder injection molding. Materials (Basel), 2013, 6, 3641–3662.
   PubMed Web of Science ®Google Scholar
• Miura H, Osada T, Itoh Y. Metal injection molding (MIM) processing. Adv. Metall Biomater, 2015, 27–56.
   Google Scholar
• H. X. Chen, Y. T. Tsai, K. H. Lin. Effect of sintering parameters and powder characteristics on the performance of metal-injection-molded SKD11 parts. Lect. Notes Eng. Comput. Sci., 2013, 2206, 1825–1830.
   Google Scholar
• J. W. Jeon, J. H. Yun, M. S. Jeong, Y. G. Kim, H. J. Park, G. M. Bae, J. H. Sung. Metal powder injection molding process for manufacturing adapter component. Key Eng. Mater., 2014, 622-623, 868–875.
   Google Scholar
• S. M. Jabir, A. Noorsyakirah, O. M. Afian, M. Z. Nurazilah, M. A. Aswad, N. H. Afiq, M. Mazlan. Analysis of the rheological behavior of copper metal injection molding (MIM) feedstock. Proc. Chem., 2016, 19, 148–152.
   Google Scholar
• T. Osada, Y. Kanda, K. Kudo, F. Tsumori, H. Miura. High temperature mechanical properties of TiAl intermetallic alloy parts fabricated by metal injection molding. J. Jpn. Soc. Powder. Powder. Metall., 2016, 63, 457–461.
   Google Scholar
• B. Hausnerova, B. N. Mukund, D. Sanetrnik. Rheological properties of gas and water atomized 17-4PH stainless steel MIM feedstocks: effect of powder shape and size. Powder Technol., 2017, 312, 152–158.
   Web of Science ®Google Scholar
• Y. Tongshan . Study on Pyrolysis Kinetics of Polyethylene in the Ethylene. China University of Petroleum, 2014.
   Google Scholar
• F. A. He, L. M. Zhang. Study on branching structure, melting, and crystallization of polyethylene prepared by nickel a -diimine catalyst covalently intercalated inside OapPOSS-modified laponite clay gallery. Polym. Test., 2014, 35, 80–86.
   Web of Science ®Google Scholar
• S. Kajikawa, T. Iizuka. Injection molding using only 200 °C steamed bamboo powder by controlling metal mold temperature. Proc. Eng., 2014, 81, 1186–1191.
   Google Scholar
• X. L. Ni, H. Q. Yin, L. Liu, S.-J. Yi, X.-H. Qu. Injection molding and debinding of micro gears fabricated by micro powder injection molding. Int. J. Miner. Metal., 2013, 20, 82–87.
   Web of Science ®Google Scholar
• Y. M. Heo, K. H. Shin, J. D. Kim. A study on the development of micro metal gear with outer diameter of 500 μm using MIM process. Appl. Mech. Mater., 2012, 267, 25–28.
   Google Scholar