Tensile strength estimation of paper sheets made from recycled wood and non-wood fibers using machine learning

References

• Adamopoulos, S., Karageorgos, A., Rapti, E.& Birbilis, D. (2016). Predicting the properties of corrugated base papers using multiple linear regression and artificial neural networks. Drewno, 59(198), 61–19. https://doi.org/10.12841/wood.1644-3985.144.13
   Web of Science ®Google Scholar
• Al-Hasan, S. J., Balamuralikrishnan, R., & Altarawneh, M. (2020). Eco-friendly asphalt approach for the development of sustainable roads. Journal of Human, Earth, and Future, 1(3), 97–111. https://doi.org/10.28991/HEF-2020-01-03-01
   Google Scholar
• Almonti, D., Baiocco, G., Tagliaferri, V., & Ucciardello, N. (2019). Artificial neural network in fibres length prediction for high precision control of cellulose refining. Materials, 12(22), 3730. https://doi.org/10.3390/ma12223730
   PubMed Web of Science ®Google Scholar
• Almonti, D., Baiocco, G., & Ucciardello, N. (2021). Pulp and paper characterization by means of artificial neural networks for effluent solid waste minimization—A case study. Journal of Process Control, 105, 283–291. https://doi.org/10.1016/j.jprocont.2021.08.012
   Web of Science ®Google Scholar
• Bajpai, P. K. (2010). Solving the problems of recycled fiber processing with enzymes. BioResources, 5(2), 1311–1325. https://bioresources.cnr.ncsu.edu/BioRes_05/BioRes_05_2_1311_Bajpai_Solving_Problems_Recycling_w_Enzymes_932.pdf
   Web of Science ®Google Scholar
• Belle, J., & Odermatt, J. (2016). Initial wet web strength of paper. Cellulose, 23(4), 2249–2272. https://doi.org/10.1007/s10570-016-0961-7
   Web of Science ®Google Scholar
• Borodulina, S., Kulachenko, A., Galland, S., & Galland, S. (2012). Stress-strain curve of paper revisited. Nordic Pulp & Paper Research Journal, 27(2), 318–328. https://doi.org/10.3183/npprj-2012-27-02-p318-328
   Web of Science ®Google Scholar
• Bouchard, J., & Douek, M. (1994). The effects of recycling on the chemical properties of pulps. Journal of pulp and paper Science, 20(5), J131–J136. https://www.researchgate.net/publication/265664709_The_Effects_of_Recycling_on_the_Chemical_Properties_of_Pulps
   Google Scholar
• Campano, C., Merayo, N., Negro, C., & Blanco, Á. (2018). Low-fibrillated bacterial cellulose nanofibers as a sustainable additive to enhance recycled paper quality. International Journal of Biological Macromolecules, 114, 1077–1083. https://doi.org/10.1016/j.ijbiomac.2018.03.170
   PubMed Web of Science ®Google Scholar
• Chen, Y., Wang, Y., Wan, J., & Ma, Y. (2010). Crystal and pore structure of wheat straw cellulose fiber during recycling. Cellulose, 17(2), 329–338. https://doi.org/10.1007/s10570-009-9368-z
   Web of Science ®Google Scholar
• Duker, E., & Lindström, T. (2008). On the mechanisms behind the ability of CMC to enhance paper strength. Nordic Pulp & Paper Research Journal, 23(1), 57–64. https://doi.org/10.3183/npprj-2008-23-01-p057-064
   Web of Science ®Google Scholar
• El-Sayed, E. S. A., El-Sakhawy, M., & El-Sakhawy, M. A. M. (2020). Non-wood fibers as raw material for pulp and paper industry. Nordic Pulp & Paper Research Journal, 35(2), 215–230. https://doi.org/10.1515/npprj-2019-0064
   Web of Science ®Google Scholar
• Gurnagul, N., Ju, S., & Page, D. H. (2001). Fibre-fibre bond strength of once-dried pulps. Journal of pulp and paper Science, 27(3), 88–91. https://www.researchgate.net/profile/Norayr-Gurnagul/publication/260124953_Fibre-fibre_bond_strength_of_once-dried_pulps/links/55c365fc08aeca747d5ec71d/Fibre-fibre-bond-strength-of-once-dried-pulps.pdf
   Google Scholar
• Hamzeh, Y., Sabbaghi, S., Ashori, A., Abdulkhani, A., & Soltani, F. (2013). Improving wet and dry strength properties of recycled old corrugated carton (OCC) pulp using various polymers. Carbohydrate Polymers, 94(1), 577–583. https://doi.org/10.1016/j.carbpol.2013.01.078
   PubMed Web of Science ®Google Scholar
• Haque, M. R., Mostafa, M. S., & Sah, S. K. (2021). Performance evaluation for mechanical behaviour of concrete incorporating recycled plastic bottle fibers as locally available materials. Civil Engineering Journal, 7(4), 713–719. https://doi.org/10.28991/cej-2021-03091684
   Google Scholar
• He, J., Cui, S., & Wang, S. Y. (2008). Preparation and crystalline analysis of high‐grade bamboo dissolving pulp for cellulose acetate. Journal of Applied Polymer Science, 107(2), 1029–1038. https://doi.org/10.1002/app.27061
   Web of Science ®Google Scholar
• Hirn, U., & Schennach, R. (2015). Comprehensive analysis of individual pulp fiber bonds quantifies the mechanisms of fiber bonding in paper. Scientific Reports, 5(1), 1–9. https://doi.org/10.1038/srep10503
   Google Scholar
• Howard, R. C., & Bichard, W. (1992). The basic effects of recycling on pulp properties. Journal of pulp and paper Science, 18(4), J151–J159. https://citeseerx.ist.psu.edu/document?repid=rep1&type=pdf&doi=dcecbf98381939408e1babb5bd18dee32be24036
   Google Scholar
• Hubbe, M. A. (2014). Prospects for maintaining strength of paper and paperboard products while using less forest resources: A review. BioResources, 9(1), 1634–1763. https://bioresources.cnr.ncsu.edu/wp-content/uploads/2016/06/BioRes_09_1_1634_Review_Hubbe_Prospects_Strength_Paper_Using_Less_Forest_Resources_4843.pdf
   Web of Science ®Google Scholar
• Hubbe, M. A., Venditti, R. A., Barbour, R. L. & Zhang, M. (2003). Changes to unbleached kraft fibers due to drying and recycling. Progress in Paper Recycling, 12(3), 11–20. https://www.researchgate.net/publication/255601709_Changes_to_Unbleached_Kraft_Fibers_Due_to_Drying_and_Recycling
   Google Scholar
• Hubbe, M. A., Venditti, R. A., & Rojas, O. J. (2007). What happens to cellulosic fibers during papermaking and recycling? A review. BioResources, 2(4), 739–788. https://bioresources.cnr.ncsu.edu/resources/what-happens-to-cellulosic-fibers-during-papermaking-and-recycling-a-review/
   Web of Science ®Google Scholar
• Hughes, M. (2012). Defects in natural fibres: Their origin, characteristics and implications for natural fibre-reinforced composites. Journal of Materials Science, 47(2), 599–609. https://doi.org/10.1007/s10853-011-6025-3
   Web of Science ®Google Scholar
• Jiang, Y., Chen, Y., Wu, Q., & Wei, Z. (2019). Fiber structures and properties of eucalyptus kraft pulp via different bleaching methods. Nordic Pulp & Paper Research Journal, 34(3), 280–288. https://doi.org/10.1515/npprj-2019-0030
   Web of Science ®Google Scholar
• Jin, H., Kose, R., Akada, N., & Okayama, T. (2022). Relationship between wettability of pulp fibers and tensile strength of paper during recycling. Scientific Reports, 12(1), 1–11. https://doi.org/10.1038/s41598-022-05514-2
   PubMed Web of Science ®Google Scholar
• Keränen, J. T., & Retulainen, E. A. (2016). Changing quality of recycled fiber material-Part 1. Factors affecting the quality and an approach for characterization of the strength potential. BioResources, 11(4), 10404–10418. https://doi.org/10.15376/biores.11.4.
   Web of Science ®Google Scholar
• Kumar, V., Pathak, P., & Bhardwaj, N. K. (2020). Waste paper: An underutilized but promising source for nanocellulose mining. Waste Management, 102, 281–303. https://doi.org/10.1016/j.wasman.2019.10.041
   PubMed Web of Science ®Google Scholar
• Liang, N. Z., & Chen, G. (2015). Analysis on beating characteristics and electro-acoustic properties of Canada sulphate softwood pulp. Audio Engineering, 10, 21–26.
   Google Scholar
• Lindström, T., Fellers, C., Ankerfors, M., & Nordmark, G. G. (2016). On the nature of joint strength of paper−Effect of dry strength agents–Revisiting the page equation. Nordic Pulp & Paper Research Journal, 31(3), 459–468. https://doi.org/10.3183/npprj-2016-31-03-p459-468
   Web of Science ®Google Scholar
• Liu, Z., Wang, H., & Hui, L. (2018). Pulping and papermaking of non-wood fibers. In S. N. Kazi (Ed.), Pulp and paper processing (pp. 4–31). IntechOpen.
   Google Scholar
• Li, M., Zhou, P., Wang, L., & Yuan, Y. (2021). Data-driven multiobjective predictive optimal control of refining process with non-Gaussian stochastic distribution dynamics. IEEE Transactions on Industrial Informatics, 17(11), 7269–7278. https://doi.org/10.1109/TII.2021.3056709
   Web of Science ®Google Scholar
• Manfredi, M., De Oliveira, R. C., Da Silva, J. C., & Silva, J. C. D. (2013). Ultrasonic treatment of secondary fibers to improve paper properties. Nordic Pulp & Paper Research Journal, 28(2), 297–301. https://doi.org/10.3183/npprj-2013-28-02-p297-301
   Web of Science ®Google Scholar
• Moral, A., Monte, M. C., Cabeza, E. & Blanco Suárez, Á. (2010). Morphological characterization of pulps to control paper properties. Cellulose Chemistry and Technology, 44(10), 473–480. https://www.cellulosechemtechnol.ro/pdf/CCT10(2010)/p.473-480.pdf
   Web of Science ®Google Scholar
• Nazhad, M. M. (2005). Recycled fiber quality-A review. Journal of Industrial and Engineering Chemistry, 11(3), 314–329. https://www.researchgate.net/publication/285731276_Recycled_fiber_quality-_A_review
   Web of Science ®Google Scholar
• Neagu, R. C., Gamstedt, E. K., Bardage, S. L., & Lindström, M. (2006). Ultrastructural features affecting mechanical properties of wood fibres. Wood Material Science and Engineering, 1(3–4), 146–170. https://doi.org/10.1080/17480270701195374
   Google Scholar
• Nordström, B., & Hermansson, L. (2017). Effect of the ratio of softwood kraft pulp to recycled pulp on formation and strength efficiency in twin-wire roll forming. Nordic Pulp & Paper Research Journal, 32(2), 229–236. https://doi.org/10.3183/npprj-2017-32-02-p229-236
   Web of Science ®Google Scholar
• Page, D. H. (1969). A theory for the tensile strength of paper. TAPPI, 52, 674–681. https://imisrise.tappi.org/TAPPI/Products/18/OCT/18OCT583.aspx
   Google Scholar
• Page, D. H. (1993). A quantitative theory of the strength of wet webs. Journal of pulp and paper Science, 19(4), J175–J176.
   Google Scholar
• Pascanu, R., Mikolov, T., & Bengio, Y. (2013). On the difficulty of training recurrent neural networks. Proceedings of the 30th International conference on machine learning (pp. 1310–1318). Atlanta, GA, USA: PMLR.
   Google Scholar
• Retulainen, E. A., & Keränen, J. T. (2017). Changing quality of recycled fiber material-Part II. Characterization of the strength potential with fiber integrity value and its relationship with the strength properties of paper. BioResources, 12(3), 6109–6121. https://doi.org/10.15376/biores.12.3.6109-6121
   Web of Science ®Google Scholar
• Ring, G. J. (2011). The hyperbolic theory of light scattering, tensile strength, and density in paper. TAPPI Journal, 10(11), 9–18. https://doi.org/10.32964/TJ10.11.9
   Web of Science ®Google Scholar
• Salehi, K., Kordsachia, O., & Saake, B. (2017). The potential of wheat straw high yield MEA pulp for enhancing strength properties of recycled paper. BioResources, 12(4), 8255–8271. https://doi.org/10.15376/biores.12.4.8255-8271
   Web of Science ®Google Scholar
• Seo, Y. B., Choi, C. H., Seo, S. W., Lee, H. L., & Shin, J. H. (2002). Fiber property modification by mechanical pretreatment. TAPPI Journal, 1(1), 8–13. https://imisrise.tappi.org/TAPPI/Products/02/MAR/02MAR08.aspx
   Web of Science ®Google Scholar
• Seth, R. S., & Page, D. H. (1996). The problem of using page’s equation to determine loss in shear strength of fiber-fiber bonds upon pulp drying. TAPPI Journal, 79(9), 206–210. https://imisrise.tappi.org/TAPPI/Products/96/SEP/96SEP206.aspx
   Web of Science ®Google Scholar
• Smagulova, K., & James, A. P. (2019). A survey on LSTM memristive neural network architectures and applications. The European Physical Journal. Special Topics, 228(10), 2313–2324. https://doi.org/10.1140/epjst/e2019-900046-x
   Web of Science ®Google Scholar
• Solahuddin, B. A., & Yahaya, F. M. (2022). Inclusion of waste paper on concrete properties: A review. Civil Engineering Journal, 7(Special Issue), 94–113. https://doi.org/10.28991/CEJ-SP2021-07-07
   Google Scholar
• Somwang, K., Enomae, T., & Onabe, F. (2002). Effect of fiber hornification in recycling on bonding potential at interfiber crossings-confocal laser-scanning microscopy. Japan TAPPI Journal, 56(2), 239–245. https://doi.org/10.2524/jtappij.56.239
   Google Scholar
• Tao, J., & Liu, H. (2011). A method to determine sheet relative bonded area using the fiber flexibility index. Instrumentation Science & Technology, 39(2), 161–172. https://doi.org/10.1080/10739149.2010.545849
   Web of Science ®Google Scholar
• Tatsumi, D., Higashihara, T., Kawamura, S. Y., & Matsumoto, T. (2000). Ultrasonic treatment to improve the quality of recycled pulp fiber. Journal of Wood Science, 46(5), 405–409. https://doi.org/10.1007/BF00776405
   Web of Science ®Google Scholar
• Technical Association of the Pulp and Paper Industry, (2018). Forming handsheets for physical tests of pulp, test method TAPPI/ANSI T 205 sp-18, TAPPI, Atlanta, GA, USA.
   Google Scholar
• Technical Association of the Pulp and Paper Industry, (2021). Physical testing of pulp handsheets, test method T 220 sp-21. TAPPI, Atlanta, GA, USA.
   Google Scholar
• Tofani, G., Cornet, I., & Tavernier, S. (2022). Multiple linear regression to predict the brightness of waste fibres mixtures before bleaching. Chemical Papers, 76(7), 4351–4365. https://doi.org/10.1007/s11696-022-02181-5
   Web of Science ®Google Scholar
• Tschirner, U. W., Barsness, J., & Keeler, T. (2007). Recycling of chemical pulp from wheat straw and corn stover. BioResources, 2(4), 536–543. https://bioresources.cnr.ncsu.edu/BioRes_02/BioRes_02_4_536_543_Tschirner_BK_Recycling_Wheat&Corn.pdf
   Web of Science ®Google Scholar
• Wan, J., Wang, Y., & Xiao, Q. (2010). Effects of hemicellulose removal on cellulose fiber structure and recycling characteristics of eucalyptus pulp. Bioresource Technology, 101(12), 4577–4583. https://doi.org/10.1016/j.biortech.2010.01.026
   PubMed Web of Science ®Google Scholar
• Yamauchi, T. (2018). Effect of paper recycling and beating on fiber length distribution of softwood kraft pulp. Journal of Fiber Science and Technology, 74(3), 73–75. https://doi.org/10.2115/fiberst.2018-0011
   Web of Science ®Google Scholar
• Yu, Y., Si, X., Hu, C., & Zhang, J. (2019). A review of recurrent neural networks: LSTM cells and network architectures. Neural Computation, 31(7), 1235–1270. https://doi.org/10.1162/neco_a_01199
   PubMed Web of Science ®Google Scholar
• Zhang, M., Hubbe, M. A., Venditti, R. A. & Heitmann, J. A. (2002). Can recycled kraft fibres benefit from chemical addition before they are first dried? Appita Journal, 55(2), 135–144. https://repository.lib.ncsu.edu/bitstream/handle/1840.2/24/ZhangM_02_HVH_CanRecycled_Appita.pdf?sequence=1
   Web of Science ®Google Scholar
• Zhang, Y., Zeng, Z., Li, J.& Liu, H. (2021). Data-driven method for monitoring and diagnosis in energy system of papermaking process. Drying Technology, 40(13), 2710–2722. https://doi.org/10.1080/07373937.2021.1957925
   Web of Science ®Google Scholar