Application of lean Six Sigma to improve the dense medium separation performance at a diamond processing plant in Namibia

References

• Alexander, P., Antony, J., & Rodgers, B. (2019). Lean Six Sigma for small-and medium-sized manufacturing enterprises: A systematic review. International Journal of Quality & Reliability Management, 36(3), 378–20. https://doi.org/10.1108/IJQRM-03-2018-0074
   Web of Science ®Google Scholar
• Andi, R. W., Kumar, R., & Kumar, U. (2009). Implementing lean principle into mining industry issues and challenges. International Symposium on Mine Planning and Equipment Selection Nov, 16.
   Google Scholar
• Antony, J., Lizarelli, F. L., & Fernandes, M. M. (2020). A Global study into the reasons for Lean Six Sigma project failures: Key findings and directions for further research. IEEE Transactions on Engineering Management.
   Google Scholar
• Antony, J., Snee, R., & Hoerl, R. (2017). Lean Six Sigma: Yesterday, today and tomorrow. International Journal of Quality & Reliability Management, 34(7), 1073–1093. https://doi.org/10.1108/IJQRM-03-2016-0035
   Web of Science ®Google Scholar
• Cima, R. R., Brown, M. J., Hebl, J. R., Moore, R., Rogers, J. C., Kollengode, A., Amstutz, G. J., Weisbrod, C. A., Narr, B. J., & Deschamps, C. (2011). Use of lean and six sigma methodology to improve operating room efficiency in a high-volume tertiary-care academic medical center. Journal of the American College of Surgeons, 213(1), 83–92. https://doi.org/10.1016/j.jamcollsurg.2011.02.009
   PubMed Web of Science ®Google Scholar
• Citybabu, G., & Yamini, S. (2022). The implementation of Lean Six Sigma framework in the Indian context: A review and suggestions for future research. The TQM Journal, 34(6), 1823–1859. https://doi.org/10.1108/TQM-10-2021-0291
   Google Scholar
• Denyer, D., Tranfield, D., & Van Aken, J. E. (2008). Developing design propositions through research synthesis. Organization Studies, 29(3), 393–413. https://doi.org/10.1177/0170840607088020
   Web of Science ®Google Scholar
• Devaraj, S., Ow, T. T., & Kohli, R. (2013). Examining the impact of information technology and patient flow on healthcare performance: A Theory of Swift and Even Flow (TSEF) perspective. Journal of Operations Management, 31(4), 181–192. https://doi.org/10.1016/j.jom.2013.03.001
   Web of Science ®Google Scholar
• Duarte, B., Montgomery, D., Fowler, J., & Konopka, J. (2012). Deploying LSS in a global enterprise–project identification. International Journal of Lean Six Sigma, 3(3), 187–205. https://doi.org/10.1108/20401461211282709
   Google Scholar
• Dunstan, K., Lavin, B., & Sanford, R. (2006). The application of lean manufacturing in a mining environment. International Mine Management Conference, 16–18.
   Google Scholar
• Eisenhardt, K. M. (1989). Building theories from case study research. Academy of Management Review, 14(4), 532–550. https://doi.org/10.2307/258557
   Web of Science ®Google Scholar
• Ferreira, C., Sá, J. C., Ferreira, L. P., Lopes, M. P., Pereira, T., Silva, F. J. G., & Silva, F. J. G. (2019). iLeanDMAIC–A methodology for implementing the lean tools. Procedia Manufacturing, 41, 1095–1102. https://doi.org/10.1016/j.promfg.2019.10.038
   Google Scholar
• Flynn, J. R., & Vlok, P. J. (2015). Lean Approaches in Asset Management Within the Mining Industry. In Amadi-Echendu, J., Hoohlo, C., & Mathew, J. (Eds.) 9th WCEAM Research Papers. Lecture Notes in Mechanical Engineering (pp. 101–118). Springer, https://doi.org/10.1007/978-3-319-15536-4_9
   Google Scholar
• Gargate, J., Fung, S. A., Jara, J., & Raymundo, C. (2018). Six sigma model optimized for reducing downtime in an open-pit mine. Brazilian Technology Symposium, 523–531.
   Google Scholar
• Hadidi, L. A., Bubshait, A., & Khreishi, S. (2017). Six Sigma for improving aesthetic defects in aluminum profiles facility. Facilities, 35(3/4), 242–267. https://doi.org/10.1108/F-01-2016-0002
   Google Scholar
• Karunakaran, S. (2016). Innovative application of LSS in aircraft maintenance environment. International Journal of Lean Six Sigma, 7(1), 85–108. https://doi.org/10.1108/IJLSS-01-2015-0001
   Web of Science ®Google Scholar
• Kęsek, M., Bogacz, P., & Migza, M. (2019). The application of lean management and six sigma tools in global mining enterprises. IOP Conference Series: Earth and Environmental Science, 214(1), 12090.
   Google Scholar
• Krishnan, S., Mathiyazhagan, K., & Sreedharan, V. R. (2020). Developing a hybrid approach for lean six sigma project management: A case application in the reamer manufacturing industry. IEEE Transactions on Engineering Management.
   Google Scholar
• Lööw, J. (2015). Lean production in mining: An overview. Ulea university of technology. Available at. https://www.diva-portal.org/smash/get/diva2:996836/FULLTEXT01.pdf
   Google Scholar
• Malhotra, D. (2009). Recent advances in mineral processing plant design. Society for Mining, Metallurgy, and Exploration (October 1, 2009), Colarado,
   Google Scholar
• Maunzagona, S. A., & Telukdarie, A. (2017). The impact of lean on the mining industry: A simulation evaluation approach. INCOSE International Symposium, 27(1), 965–981. https://doi.org/10.1002/j.2334-5837.2017.00406.x
   Google Scholar
• Nie, P. (2016). Safety quality management in the underground coal mine based on Six Sigma. Electron J Geotech Eng, 21, 7055–7067. https://web.archive.org/web/20180428192315id_/http://www.ejge.com/2016/Ppr2016.0640ma.pdf
   Google Scholar
• Oliva, R. (2019). Intervention as a research strategy. Journal of Operations Management, 65(7), 710–724. https://doi.org/10.1002/joom.1065
   Web of Science ®Google Scholar
• Patel, A. S., & Patel, K. M. (2021). Critical review of literature on Lean Six Sigma methodology. International Journal of Lean Six Sigma, 12(3), 627–674. https://doi.org/10.1108/IJLSS-04-2020-0043
   Web of Science ®Google Scholar
• Rocha, I. O., da Silva, G. L., da Cruz, R. W. C., Figueiredo, S. G., & Lima, L. B. (2020). Creating and application of lean 4.0 methodology in bauxite and alumina. Aluminium International Today, 33(4), 24–30. https://www.proquest.com/docview/2483981000?pq-origsite=gscholar&fromopenview=true
   Google Scholar
• Rowley, J. (2012). Conducting research interviews. Management Research Review, 35(3–4), 260–271. https://doi.org/10.1108/01409171211210154
   Google Scholar
• Schmenner, R. W. (2004). Service businesses and productivity. Decision Sciences, 35(3), 333–347. https://doi.org/10.1111/j.0011-7315.2004.02558.x
   Web of Science ®Google Scholar
• Schmenner, R. W., & Swink, M. L. (1998). On theory in operations management. Journal of Operations Management, 17(1), 97–113. https://doi.org/10.1016/S0272-6963(98)00028-X
   Google Scholar
• Şimşek, T., Öner, M. A., Kunday, Ö., & Olcay, G. A. (2022). A journey towards a digital platform business model: A case study in a global tech-company. Technological Forecasting and Social Change, 175, 121372. https://doi.org/10.1016/j.techfore.2021.121372
   Web of Science ®Google Scholar
• Singh, M., & Rathi, R. (2018). A structured review of Lean Six Sigma in various industrial sectors. International Journal of Lean Six Sigma, 10(2), 622–664. https://doi.org/10.1108/IJLSS-03-2018-0018
   Web of Science ®Google Scholar
• Singh, M., Rathi, R., & Garza-Reyes, J. A. (2021). Analysis and prioritization of Lean Six Sigma enablers with environmental facets using best worst method: A case of Indian MSMEs. Journal of Cleaner Production, 279, 123592. https://doi.org/10.1016/j.jclepro.2020.123592
   Web of Science ®Google Scholar
• Sony, M., Naik, S., & Antony, J. (2020). Lean Six Sigma and social performance: A review and synthesis of current evidence. Quality Management Journal, 27(1), 21–36. https://doi.org/10.1080/10686967.2019.1689799
   Google Scholar
• Sony, M., Naik, S., & Therisa, K. K. (2019). Why do organizations discontinue Lean Six Sigma initiatives? International Journal of Quality & Reliability Management, 36(3), 420–436. https://doi.org/10.1108/IJQRM-03-2018-0066
   Web of Science ®Google Scholar
• Sripriya, R., Banerjee, P. K., Rao, P. V. T., Dutta, A., & Rao, M. V. S. (2001). Critical evaluation of factors affecting the operation of dense medium cyclones treating medium coking coals. International Journal of Mineral Processing, 63(4), 191–206. https://doi.org/10.1016/S0301-7516(01)00048-5
   Google Scholar
• Sunder, M. V. (2013). Synergies of lean six sigma. IUP Journal of Operations Management, 12(1), 21. https://www.researchgate.net/profile/Vijaya-Sunder-M/publication/256060299_Synergies_of_Lean_Six_Sigma/links/55ae3f1c08aed9b7dcdcd67b/Synergies-of-Lean-Six-Sigma.pdf
   Google Scholar
• VanHilst, M., Garg, P. K., & Lo, C. (2005). Repository mining and Six Sigma for process improvement. Proceedings of the 2005 International Workshop on Mining Software Repositories, 1–4.
   Google Scholar
• Walter, O. M. F. C., Paladini, E. P., Henning, E., & Kalbusch, A. (2021). Recent developments in sustainable lean six sigma frameworks: Literature review and directions. Production Planning & Control, 1–19. https://doi.org/10.1080/09537287.2021.1967497
   Web of Science ®Google Scholar
• Wilson, L. (2010). How to implement lean manufacturing. McGraw-Hill Education.
   Google Scholar
• Yadav, N., Shankar, R., & Singh, S. P. (2021). Critical success factors for lean six sigma in quality 4.0. International Journal of Quality and Service Sciences, 13(1), 123–156. https://doi.org/10.1108/IJQSS-06-2020-0099
   Web of Science ®Google Scholar
• Yin, R. K. (2005). Case Study Research: Design and Methods. Sage.
   Google Scholar
• Yin, R. K. (2011). Applications of case study research. Sage.
   Google Scholar