Effect of metallic reinforcement and mechanically mixed layer on the tribological characteristics of Al-Zn-Mg alloy matrix composites under T6 treatment

References

• Deore, H. A., Mishra, J., Rao, A. G., Mehtani, H., & Hiwarkar, V. D. (2019). Effect of filler material and post process ageing treatment on microstructure, mechanical properties and wear behaviour of friction stir processed AA 7075 surface composites. Surface & Coatings Technology, 374, 52–13. https://doi.org/10.1016/j.surfcoat.2019.05.048
   Web of Science ®Google Scholar
• Gopalakrishnan, S., & Murugan, N. (2012). Production and wear characterisation of AA 6061 matrix titanium carbide particulate reinforced composite by enhanced stir casting method. Composites Part B: Engineering, 43(2), 302–308. https://doi.org/10.1016/j.compositesb.2011.08.049
   Web of Science ®Google Scholar
• Gowri Shankar, M. C., Sharma, S. S., Kini, A., Jayashree, P. K., & Gurumurthy, B. M. (2016). Study of wear behaviour and mechanical mixed layer on artificial aged Al6061 composite reinforced with B4C particles. Indian Journal of Science and Technology, 12(12), 1–9. https://doi.org/10.17485/ijst/2016/v9i12/88073
   Google Scholar
• Hariharasakthisudhan, P., Jose, S., & Manisekar, K., Dry sliding wear behaviour of single and dual ceramic reinforcements premixed with Al powder in AA6061 matrix, Journal of Materials Research and Technology, Volume 8, Issue 1, 2019, 275–283, https://doi.org/10.1016/j.jmrt.2018.01.005.
   Google Scholar
• Hindi, J., Hegde, A., Bm, G., Sharma, S., Kini, A., Murthy, A. A., & K,M. (2022). ‘TEM analysis and related mechanical characterization of age hardened aluminium 7075-grey cast iron particle reinforced composites. Cogent Engineering, 9(1), 2114208.
   Web of Science ®Google Scholar
• Jitendra, M., Gohil, Mistrya, P. P., & Gohilc, P. (2019). Experimental investigations on wear and friction behaviour of Si3N4 reinforced heat-treated aluminium matrix composites produced using electromagnetic stir casting process. Composites Part B, 161, 190–204. https://doi.org/10.1016/j.compositesb.2018.10.074
   Web of Science ®Google Scholar
• Kanayo, K., & Kazeem, A. (2015). Microstructural characteristics, mechanical and wear behaviour of aluminium matrix hybrid composites reinforced with alumina, rice husk ash and graphite. Engineering Science and Technology, 18(3), 416–422. https://doi.org/10.1016/j.jestch.2015.02.003
   Google Scholar
• Killic, S., Kacar, I., Sahin, M., Ozturk, F., & Erdem, O., “Effects of aging temperature, time, and pre-strain on mechanical properties of AA7075”, Materials Research, 22, 2019, 1–13, https://doi.org/10.1590/1980-5373-mr-2019-0006
   Google Scholar
• Lei, Y., Yan, H., & Wei, Z. (2021). Effect of hot extrusion on microstructure and tribological behavior of Al2O3p reinforced 7075 aluminum-matrix composites. Journal of Central South University, 28, 2269–2284. https://doi.org/10.1007/s11771-021-4768-9
   Web of Science ®Google Scholar
• Lua, T., Chena, W., Xua, W., Wang, P., Maoa, M., Liu, Y., & Fu, Z. (2018). Yixiong Liuc and Zhiqiang Fua “The effects of Cr particles addition on the aging behaviour and mechanical properties of SiCp/7075Al composites. Materials Characterization, 136, 264–271. https://doi.org/10.1016/j.matchar.2017.12.030
   Web of Science ®Google Scholar
• Manohar, G., Maity, S. R., & Pandey, K. M. (2022). Microstructural and mechanical properties of microwave sintered AA7075/Graphite/SiC hybrid composite fabricated by powder metallurgy techniques. Silicon, 14(10), 5179–5189. https://doi.org/10.1007/s12633-021-01299-7
   Web of Science ®Google Scholar
• M, B., Hindi, G., Kini, J., U, A., Sharma, S. S., & Stojanovic, B. (2021). Investigation and analysis of aging behavior and tensile fracture study on precipitation hardened al7075-white cast iron particulate reinforced composites. Cogent Engineering, 8(1), 1920093. https://doi.org/10.1080/23311916.2021.1920093
   Web of Science ®Google Scholar
• Miranda, G., Buciumeanu, M., Madeira, S., Carvalho, O., Soares, D., & Silva, F. S. (2015). Hybrid composites-metallic and ceramic reinforcements influence on mechanical and wear behaviour. Composites Part B, 74, 153–165. https://doi.org/10.1016/j.compositesb.2015.01.007
   Web of Science ®Google Scholar
• Moazami, M. R., Razaghian, A., Mirzadeh, H., Emamy, M., & Moharami, A., Tribological behavior of as-cast and wrought Al –Mg2Si hybrid composites reinforced by Ti-based intermetallics, Journal of Materials Research and Technology, 20, 2022, 1315–1327, https://doi.org/10.1016/j.jmrt.2022.07.142.
   Google Scholar
• Pan, S., Saso, T., Yu, N., Sokoluk, M., Yao, G., Umehara, N., & Li, X., New study on tribological performance of AA7075- TiB2 nanocomposites, Tribology International, 152, 2020, 106565.
   Google Scholar
• Prakash, J., Gopalakannan, S., & Chakravarthy, V. K. Mechanical characterization studies of aluminium alloy 7075 based nanocomposites. Silicon 14, 1683–1694. (2022). https://doi.org/10.1007/s12633-021-00979-8
   Google Scholar
• Prasad Reddy, A., Vamsi Krishna, P., & Rao, R. N. (2019). Tribological Behaviour of Al6061–2SiC-xGr hybrid metal matrix nanocomposites fabricated through ultrasonically assisted stir casting technique. Silicon, 11(6), 2853–2871. https://doi.org/10.1007/s12633-019-0072-9
   Web of Science ®Google Scholar
• Ramkumar, S., Fahad, A., Al-Mufadi, S., Siddharth, Raghu, R., & Siddharth, S. (2019). Investigations on microstructure, mechanical, and tribological behaviour of AA 7075 –x wt.% TiC composites for aerospace applications. Archives of Civil and Mechanical Engineering, 19(2), 428–438. https://doi.org/10.1016/j.acme.2018.12.003
   Web of Science ®Google Scholar
• Ren, J., Wang, R., Feng, Y., Peng, C., & Cai, Z. (2019). Microstructure evolution and mechanical properties of an ultrahigh strength Al-Zn-Mg-Cu-Zr-Sc (7055) alloy processed by modified powder hot extrusion with post aging. Vacuum, 161, 434–442. https://doi.org/10.1016/j.vacuum.2019.01.013
   Web of Science ®Google Scholar
• Sardar, S., Karmakar, S. K., & Das, D. (2020). Identification and modelling of applicable wear conditions for stir cast Al-composite. Friction, 8(5), 847–873. https://doi.org/10.1007/s40544-019-0302-6
   Web of Science ®Google Scholar
• Ul Haq, M. I., & Anand, A. (2018). Mir Irfan Ul Haq and Ankush Anand “dry sliding friction and wear behaviour of AA7075-Si3N4 composite. Silicon, 10(5), 1819–1829. https://doi.org/10.1007/s12633-017-9675-1
   Web of Science ®Google Scholar
• Xiao-Feng, W. U., ZHANG, G.A., & Fu-Fa, W. U. (2013). Influence of Bi addition on microstructure and dry sliding wear behaviors of cast Al-Mg2Si metal matrix composite. Transactions of Nonferrous Metals Society of China, 23(6), 1532–1542. Pages 1532-1542, ISSN 1003-6326. https://doi.org/10.1016/S1003-6326(13)62627-8
   Web of Science ®Google Scholar
• Zeng, X., Yu, J., Fu, D., Zhang, H., & Teng, J. (2018). Wear characteristics of hybrid aluminum-matrix composites reinforced with well-dispersed reduced graphene oxide nanosheets and silicon carbide particulates. Vacuum, 155, 364–375. https://doi.org/10.1016/j.vacuum.2018.06.033
   Web of Science ®Google Scholar