Optimization of gas tungsten arc welding parameters for welding of super duplex stainless steel using factorial design

References

• Andoh, P. Y., Davis, F., & Adablah, G. (2022). Research paper selection of optimum pouring conditions for improvement of Aluminum Alloy. Castings in Ghana, 41(2), 1–21.
   Google Scholar
• Andoh, P. Y., Davis, F., & Fiagbe, Y. A. K. (2013). Monitoring of Carbon Dioxide production in a Carbonated beverage company using factorial design technique. International Journal of Scientific & Technology Research, 2(10). https://www.ijstr.org/paper-references.php?ref=IJSTR-1013-7418
   Google Scholar
• Baghel, P. K., & Gupta, T. (2022). Optimization of parameters of pulse current gas tungsten arc welding using non conventional techniques. Journal of Advanced Joining Processes, 6(July), 100124. https://doi.org/10.1016/j.jajp.2022.100124
   Google Scholar
• Baloyi, P., Akinlabi, S. A., Madushele, N., Adedeji, P. A., Hassan, S., Mkoko, Z., & Akinlabi, E. T. (2021). Materials Today: Proceedings Two-staged technique for determining ultimate tensile strength in MIG welding of mild steel. Materials Today: Proceedings, 44, 1227–1234. https://doi.org/10.1016/j.matpr.2020.11.244
   Google Scholar
• Bhatt, H. (2018). Study of effect of process parameters of welding during TIG welding of AA 7075 and its optimization. International Journal of Applied Engineering Research, 13(12), 10658–10663. http://www.ripublication.com/
   Google Scholar
• Blavatsky, H. P. (2019). Section IX welding brazing and fusion qualification. The Secret Doctrine, 91–97. https://doi.org/10.1017/cbo9780511978371.011
   Google Scholar
• Box, G. E. P., Hunter, W. G., Hunter, J. S., & Hunter, J. S. (1979). Statistics for experimenters: An introduction to design, data analysis, and model building. Journal of Marketing Research, 16(2), 291. https://doi.org/10.2307/3150696
   Web of Science ®Google Scholar
• Chicco, D., Warrens, M. J., & Jurman, G. (2021). The coefficient of determination R-squared is more informative than SMAPE, MAE, MAPE, MSE and RMSE in regression analysis evaluation. Peer Journal Computer Science, 7, 1–24. https://doi.org/10.7717/PEERJ-CS.623
   Google Scholar
• Davis, F., Ansong, L. E., Andoh, P. Y., & Owusu-Ofori, S. P. (2007). Quasi-automatic monitoring system for turning operation using acoustic emission signal response and factorial design method. Journal of Science and Technology (Ghana), 27(3). https://doi.org/10.4314/just.v27i3.33063
   Google Scholar
• Eghlimi, A., Shamanian, M., & Raeissi, K. (2014). Effect of current type on microstructure and corrosion resistance of super duplex stainless steel claddings produced by the gas tungsten arc welding process. Surface and Coatings Technology, 244, 45–51. https://doi.org/10.1016/j.surfcoat.2014.01.047
   Web of Science ®Google Scholar
• Kutelu, B. J., Seidu, S. O., Eghabor, G. I., & Ibitoye, A. I. (2018). Review of GTAW welding parameters. Journal of Minerals and Materials Characterization and Engineering, 06(5), 541–554. https://doi.org/10.4236/jmmce.2018.65039
   Google Scholar
• Madadi, F., Ashrafizadeh, F., & Shamanian, M. (2011). Optimization of pulsed TIG cladding process of stellite alloy on carbon steel using RSM. Journal of Alloys and Compounds, 510(1), 71–77. https://doi.org/10.1016/j.jallcom.2011.08.073
   Web of Science ®Google Scholar
• Moon, I., Jang, B., & Koh, J. (2013). Heat treatment effect on pitting corrosion of super duplex stainless steel UNS S32750 GTA welds. Advanced Materials Research, 746, 467–472. https://doi.org/10.4028/www.scientific.net/AMR.746.467
   Google Scholar
• Patil, S. R., & Waghmare, C. A. (2013). Optimization of Mig Welding Parameters for Improving Strength of Welded Joints Address for Correspondence. International Journal of Advanced Engineering Research and Studies, II(July–Sept.2013), 14–16. http://www.technicaljournalsonline.com/ijaers/index.html
   Google Scholar
• Paulraj, P., & Garg, R. (2015). Effect of welding parameters on mechanical properties of GTAW of UNS S31803 and UNS S32750 weldments. Manufacturing Review, 2, 29. https://doi.org/10.1051/mfreview/2015032
   Google Scholar
• Prabaharan, C., Venkatachalam, P., Suresh Kumar, K., & Lenin, K. (2014). Parametric optimization of gas tungsten arc welding processes by using factorial design approach. Journal of Scientific and Industrial Research, 73(6), 415–420.
   Web of Science ®Google Scholar
• Rajendra, S., & Arakerimath, R. R. (2015). Parameter optimization of tig welding using austenitic stainless steel. International Journal of Innovative and Emerging Research in Engineering, 2(1), 120–124.
   Google Scholar
• Ramkumar, D., Mishra, D., Ganesh Raj, B., Vignesh, M. K., Thiruvengatam, G., Sudharshan, S. P., Arivazhagan, N., Sivashanmugam, N., & Rabel, A. M. (2015). Effect of optimal weld parameters in the microstructure and mechanical properties of autogeneous gas tungsten arc weldments of super-duplex stainless steel UNS S32750. Materials and Design, 66(PA), 356–365. https://doi.org/10.1016/j.matdes.2014.10.084
   Google Scholar
• Roth, S., Hezler, A., Pampus, O., Coutandin, S., & Fleischer, J. (2020). Influence of the process parameter of resistance spot welding and the geometry of weldable load introducing elements for FRP/metal joints on the heat input. Journal of Advanced Joining Processes, 2(June), 100032. https://doi.org/10.1016/j.jajp.2020.100032
   Google Scholar
• Yang, J., Wang, Q., Wei, Z., & Guan, K. (2014). Weld failure analysis of 2205 duplex stainless steel nozzle. Case Studies in Engineering Failure Analysis, 2(2), 69–75. https://doi.org/10.1016/j.csefa.2014.05.001
   Google Scholar
• Yousefieh, M., Shamanian, M., & Arghavan, A. R. (2012). Analysis of design of experiments methodology for optimization of pulsed current GTAW process parameters for ultimate tensile strength of UNS S32760 welds. Metallography, Microstructure, and Analysis, 1(2), 85–91. https://doi.org/10.1007/s13632-012-0017-9
   Google Scholar
• Yousefieh, M., Shamanian, M., & Saatchi, A. (2011). Optimization of the pulsed current gas tungsten arc welding (PCGTAW) parameters for corrosion resistance of super duplex stainless steel (UNS S32760) welds using the Taguchi method. Journal of Alloys and Compounds, 509(3), 782–788. https://doi.org/10.1016/j.jallcom.2010.09.087
   Web of Science ®Google Scholar