Dependence of pre-treatment structure on spheroidization and turning characteristics of AISI1040 steel

References

• Agrawal, A., Goel, S., Bin Rashid, W., & Price, M. (2015). Prediction of surface roughness during hard turning of AISI 4340 steel (69 HRC). Applied Soft Computing, 30, 279–20. https://doi.org/10.1016/j.asoc.2015.01.059
   Web of Science ®Google Scholar
• Akasawa, T., Fukuda, I., Nakamura, K., & Tanaka, T. (2004). Effect of microstructure and hardness on the machinability of medium-carbon chrome-molybdenum steel. Journal of Materials Processing Technology, 153, 48–53. https://doi.org/10.1016/j.jmatprotec.2004.04.312
   Web of Science ®Google Scholar
• Arruabarrena, J., López, B., & Rodriguez-Ibabe, J. M. (2014, Oct). Influence of prior warm deformation on cementite spheroidization process in a low-alloy medium carbon steel. Metallurgical and Materials Transactions A, 45(3), 1470–1484. https://doi.org/10.1007/s11661-013-2066-3
   Google Scholar
• Avner, S. H. (2015). Introduction to Physical Metallurgy (Vol. 1). McGraw-Hill.
   Google Scholar
• Baskar, N., Vaiysnavan, R., Prabhu, R., Prakash, R., & Kumar, T. N. (2018). Optimization of machining parameters on EN8 material using genetic algorithm. International Journal of Engineering Research and Technology, 6, 7. [Online]. Available. www.ijert.org
   Google Scholar
• Bhuyan, R. K., Kumar Akula, P., Chivukula, G. R., & Sai, B. M. (2018). Comparative study of the machining characteristics of EN24 and hardened EN24 during cnc turning. International Journal of Mechanical Engineering and Technology, 9(4), 556–564. .
   Google Scholar
• Cabanas-Moreimo, J. G., & Morales, R. D. (1992). The Spheroidization of cementite in a medium carbon steel by means of subcritical and intercritical annealing. Isij International. https://doi.org/10.2355/isijinternational.32.1297
   Web of Science ®Google Scholar
• Çalik, A. (2009). Effect of cooling rate on hardness and microstructure of AISI 1020, AISI 1040 and AISI 1060 Steels. International Journal of Physical Sciences, 4, 514–518. https://doi.org/10.1515/zna-2010-0512
   Google Scholar
• Chattopadhyay, S., & Sellars, C. M. (1977). Quantitative measurements of pearlite spheroidization. Metallography, 10(1), 89–105. https://doi.org/10.1016/0026-0800(77)90044-1
   Google Scholar
• Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126. https://doi.org/10.1016/j.measurement.2014.11.008
   Web of Science ®Google Scholar
• Davis, R., Singh, V., & Priyanka, S. (2014). Optimization of process parameters of turning operation of EN 24 steel using Taguchi design of experiment method. Lecture Notes in Engineering and Computer Science, 2, 1045–1047. .
   Google Scholar
• Dhar, N. R., Paul, S., & Chattopadhyay, A. B. (2002, May). Machining of AISI 4140 steel under cryogenic cooling—tool wear, surface roughness and dimensional deviation. Journal of Materials Processing Technology, 123(3), 483–489. https://doi.org/10.1016/S0924-0136(02)00134-6
   Web of Science ®Google Scholar
• E8, A. S. T. M. (2010). ASTM E8/E8M standard test methods for tension testing of metallic materials 1. Annu B ASTM Standard, 4, 1–27. https://doi.org/10.1520/E0008
   Google Scholar
• Ebrahimian, A., & Ghasemi Banadkouki, S. S. (2017). Mutual mechanical effects of ferrite and martensite in a low alloy ferrite-martensite dual phase steel. Journal of Alloys and Compounds, 708, 43–54. https://doi.org/10.1016/j.jallcom.2017.02.287
   Web of Science ®Google Scholar
• Finkel’shtein, Y. S., Gladkovskii, V. A., & Batist, G. S. (1963, Mar). Heat treatment of low carbon steels. Metal Science and Heat Treatment, 5(3), 153–154. https://doi.org/10.1007/BF00655401
   Google Scholar
• Ganesh, N., Kumar, M. U., Kumar, C. V., & Santhosh Kumar, B. (2014). Optimization of Cutting Parameters in Turning of En 8 Steel Using Response Surface Method and Genetic Algorithm. International Journal on Mechanical Engineering and Robotics N Ganesh Al, 3, 75–86. [Online]. Available. http://www.ijmerr.com/v3n2/ijmerr_v3n2_10.pdf
   Google Scholar
• Haddadi, F., Cho, J. W., & Lee, S. Y. (2014). The effect of chemical composition on grain structure and texture evolution of hot rough rolled carbon steels. Materials Science and Engineering: A, 607, 102–112. https://doi.org/10.1016/j.msea.2014.03.072
   Web of Science ®Google Scholar
• Haq, A. N., & Tamizharasan, T. (2006, Sep). Investigation of the effects of cooling in hard turning operations. The International Journal, Advanced Manufacturing Technology, 30, 808–816. https://doi.org/10.1007/s00170-005-0128-4
   Web of Science ®Google Scholar
• Harisha, S. R., Sharma, S., Kini, U. A., Sharma, A., & Joshi, N. (2019). Mechanical properties-morphology corroboration of spheroidized AISI1040 steel. Materials Research Express, 6(8), 0865g8. https://doi.org/10.1088/2053-1591/ab27a8
   Google Scholar
• Hegde, A., Sharma, S., Hande, R., Gurumurthy, B. M., & Jones, I. P. (2022). Microstructure and mechanical properties of manganese-alloyed austempered ductile iron produced by novel modified austempering process. Cogent Engineering, 9(1), 0–11. https://doi.org/10.1080/23311916.2022.2046301
   Web of Science ®Google Scholar
• Jahanara, A. H., Mazaheri, Y., & Sheikhi, M. (2019). Correlation of ferrite and martensite micromechanical behavior with mechanical properties of ultrafine grained dual phase steels. Materials Science and Engineering: A, 764, 138206. https://doi.org/10.1016/j.msea.2019.138206
   Web of Science ®Google Scholar
• Kamarudin, K., Rahim, E. A., Saparudin, A., & Hassan, S. (2007). Tool wear and surface roughness in turning AISI 8620 using coated ceramic tool. Lecture Notes in Computer Science, 2166(1), 1157–1161. .
   Google Scholar
• Khan, P. L., & Bhivsane, S. V. (2018). Experimental Analysis and Investigation of Machining Parameters in Finish Hard Turning of AISI 4340 Steel. Procedia Manufacturing, 20, 265–270. https://doi.org/10.1016/j.promfg.2018.02.039
   Google Scholar
• Kumar, N. S., Shetty, A., Shetty, A., Ananth, K., & Shetty, H. (2012). Effect of spindle speed and feed rate on surface roughness of carbon steels in CNC turning. Procedia Engineering, 38, 691–697. https://doi.org/10.1016/j.proeng.2012.06.087
   Google Scholar
• Mabrouki, T., Courbon, C., Fabre, D., Arrieta, I., Arrazola, P. J., & Rech, J. (2017). Influence of Microstructure on Chip Formation when Broaching Ferritic-Pearlitic Steels. Procedia CIRP, 58, 43–48. https://doi.org/10.1016/j.procir.2017.03.181
   Google Scholar
• Maden, H. (1984). A review of: “Machinability of Engineering Materials”. By B. MILLS and A. H. REDFORD (Applied Science Publishers Ltd. 198) [Pp. 423]J Price £20-00. International Journal of Production Research, 22(1), 169–170. https://doi.org/10.1080/00207548408942441
   Google Scholar
• Marimuthu, P., & Edwin, N. E. P. (2014). Experimental study for turning AISI1040 steel using TiCN/TiN coated tool. Applied Mechanics & Materials, 573, 638–643. https://doi.org/10.4028/www.scientific.net/AMM.573.638
   Google Scholar
• Mongomery, (2017). Montgomery: Design and Analysis of Experiments(C. Douglas, Ed.). John Willy & Sons. 9781118146927.
   Google Scholar
• Nalbant, M., Gökkaya, H., & Sur, G. (2007). Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning. Materials & Design, 28(4), 1379–1385. https://doi.org/10.1016/j.matdes.2006.01.008
   Web of Science ®Google Scholar
• Naylor, D. J., Llewellyn, D. T., & Keane, D. M. (1976, May). Control of machinability in medium-carbon steels. Metals Technology, 3(1), 254–271. https://doi.org/10.1179/030716976803391836
   Google Scholar
• Nikam, K. G., & Kadam, S. S. (2016). Influence of Insert Geometry and Cutting Parameters on Surface Roughness of 080M40 Steel in Turning Process. International Journal of Advancements in Technology, 4, 1–6. Retrieved November 4, 2020 https://www.ijsr.net/get_abstract.php?paper_id=OCT141235%0Ahttps://www.ijsr.net/archive/v3i11/T0NUMTQxMjM1.pdf
   Google Scholar
• Pal, A., Choudhury, S. K., & Chinchanikar, S. (2014). Machinability assessment through experimental investigation during hard and soft turning of hardened steel. Procedia Materials Science, 6, 80–91. https://doi.org/10.1016/j.mspro.2014.07.010
   Google Scholar
• Passanha, J., Sharma, S., Hegde, A., Lakshmi, B., Shankar, G., & Murthy, G. (2022). Experimental and statistical analysis of vegetable oil-brine egg yolk emulsion quench on the properties of AISI 4140 steel. Cogent Engineering, 9(1), 0–11. https://doi.org/10.1080/23311916.2022.2146626
   Web of Science ®Google Scholar
• Puneet, N. P., P, V. B., & A, J. A. (2016). Flank Wear Analysis in Turning of EN8 Steel for Different Tool Inserts. National Conference of Advances in Mechanical Engineering sciences, 119–122.
   Google Scholar
• Retd, P., V. Singh, Heat treatment of metals, Second Edi., vol. 4, no. 2. 1926.
   Google Scholar
• Saï, W. B. (2005, Aug). An investigation of tool wear in high-speed turning of AISI 4340 steel. International Journal of Advanced Manufacturing Technology, 26(4), 330–334. https://doi.org/10.1007/s00170-003-1991-5
   Web of Science ®Google Scholar
• Sharma, V. S., Sharma, S. K., & Sharma, A. K. (2008, Feb). Cutting tool wear estimation for turning. Journal of Intelligent Manufacturing, 19(1), 99–108. https://doi.org/10.1007/s10845-007-0048-2
   Web of Science ®Google Scholar
• Sivaraman, V., Sankaran, S., & Vijayaraghavan, L. (2012a). The effect of cutting parameters on cutting force during turning multiphase microalloyed steel. Procedia CIRP, 4, 157–160. https://doi.org/10.1016/j.procir.2012.10.028
   Google Scholar
• Sivaraman, V., Sankaran, S., & Vijayaraghavan, L. (2012b). Machinability of multiphase microalloyed steel. Procedia CIRP, 2, 55–59. https://doi.org/10.1016/j.procir.2012.05.039
   Google Scholar
• Sk, M. B., Alam, I., & Chakrabarti, D. (2018). The role of fibrous morphology on the Charpy impact properties of low carbon ferrite-bainite dual phase steel. Materials Science and Engineering: A, 716, 208–219. https://doi.org/10.1016/j.msea.2018.01.041
   Web of Science ®Google Scholar
• S, C. P. and Rajan, A. S. T. V. (2010). Heat treatment principles and techniques (2nd ed.). PHI publication.
   Google Scholar
• Suresh, R., Basavarajappa, S., Gaitonde, V. N., & Samuel, G. L. (2012, Jul). Machinability investigations on hardened AISI 4340 steel using coated carbide insert. International Journal of Refractory Metals & Hard Materials, 33, 75–86. https://doi.org/10.1016/j.ijrmhm.2012.02.019
   Web of Science ®Google Scholar
• Tamizharasan, T., Selvaraj, T., & Haq, A. N. (2006, Apr). Analysis of tool wear and surface finish in hard turning. International Journal of Advanced Manufacturing Technology, 28(7–8), 671–679. https://doi.org/10.1007/s00170-004-2411-1
   Web of Science ®Google Scholar
• Tian, Y. L., & Kraft, R. W. (1987, Aug). Mechanisms of pearlite spheroidization. Metallurgical Transactions A, 18(8), 1403–1414. https://doi.org/10.1007/BF02646654
   Web of Science ®Google Scholar
• Varaprasad, B., Srinivasa Rao, C., & Vinay, P. V. (2014). Effect of machining parameters on tool wear in hard turning of AISI D3 Steel. https://doi.org/10.1016/j.proeng.2014.12.257
   Google Scholar
• YAMAMOTO, T., & KUMAGAI, K. (1975). Effects of alloying elements on the machinability of low carbon steels. Transactions of the Iron and Steel Institute of Japan, 15(7), 361–370. https://doi.org/10.2355/isijinternational1966.15.361
   Google Scholar