Comparative analyses of the mechanical and microstructural properties of the weld region of LPG cylinder materials

References

• Amorin, R., & Dabo, K. (2022). Assessment of the Safety Handling of Domestic Liquified Petroleum Gas (LPG) cylinders using a suburb of afienya township as a case study. European Journal of Technology, 6(2), 16–16. https://doi.org/10.47672/ejt.1033
   Google Scholar
• Beden, S. M., Abdullah, S., & Ariffin, A. K. (2009). Review of fatigue crack propagation models for metallic components. 28(3).
   Google Scholar
• Celada-Casero, C., Siestsma, J., & Santofimia, J. (2019). The role of size in the martensitic transformation in low carbon steels. Materials & Design, 167. https://doi.org/10.1016/j.matdes.2019.107625
   Web of Science ®Google Scholar
• Chang, G., Zhou, T., Zhou, H., Zhang, P., Ma, S., Zhi, B., & Wang, S. (2020). Effect of composition on the mechanical properties and wear resistance of low and medium carbon steels with a biomimetic non-smooth surface processed by laser remelting. Metals (Basel), 10(1), 37. https://doi.org/10.3390/met10010037
   Web of Science ®Google Scholar
• Chen, Y. (2013). Irradiation effects of HT-9 martensitic steel. Nuclear Engineering & Technology, 45(3), 311–322. https://doi.org/10.5516/NET.07.2013.706
   Web of Science ®Google Scholar
• Da Silva Filho, J. F., Oliveira, C. A. S. D., Fonstein, N., Girina, O., Miranda, F. J. F., Drumond, J., Serafim, E. A., & Afonso, C. R. M. (2016). Effect of Cr additions on ferrite recrystallization and austenite formation in dual-phase steels heat treated in the intercritical temperature range. Materials Research, 19(1), 258–266. https://doi.org/10.1590/1980-5373-MR-2015-0641
   Web of Science ®Google Scholar
• Doitrand, A., & Sapora, A. Nonlinear implementation of finite fracture mechanics: A case study on notched Brazilian disk samples. (2019). International Journal of Non-Linear Mechanics, 119(May), 103245. 2020. https://doi.org/10.1016/j.ijnonlinmec.2019.103245
   Google Scholar
• Fan, X. L., Y Cai, Y., Qi, X., Wang, Z. and Ma, C., Ma, C. (2021). Mechanical properties of cryogenic high manganese steel joints filled with nickel-based materials by SMAW and SAW. Materials Letters, 304(July), 130596. https://doi.org/10.1016/j.matlet.2021.130596
   Google Scholar
• Far, A. R. H., Anijdan, S. H. M., & Abbasi, S. M. (2019). the effects of increasing Cu and Ni on a significant enhancement of mechnaical properties of highstrength low alloy, low carbon steels of HSLA-100 type. Materials Science and Engineering A, 746, 384–393. https://doi.org/10.1016/j.msea.2019.01.025
   Web of Science ®Google Scholar
• Gong, L., Liu, H., Lv, C., Zhao, L., & Riveiro, A. (2022). Effect of alloying composition on microstructure and mechanical properties of ultranarrow gap welded joints of U71Mn rail steel. Rivista Italiana della Saldatura, 74(1), 1–11. https://doi.org/10.1155/2021/9282463
   Google Scholar
• Jacob, G. C., Fellers, J. F., Simunovic, J. M., & Starbuck, J. M. (2001). Energy Absorption in Polymer Composite Materials for Automotive Crashworthiness. composite materials, 36(7), 813–850. [Online]. Available http://thyme.ornl.gov/composites/reports/jocm01.pdf
   Google Scholar
• Kahangamage, U., Chen, Y., Leung, C. W., & Ngai, T. Y. (2022). Experimental study of lean-burning limits of hydrogen-enriched LPG intended for domestic use. Journal of Energy and Power Technology, 4(2), 1–1. https://doi.org/10.21926/jept.2202016
   Google Scholar
• Kalmykova, S. (2021). “Simulation of T-joints between RHS steel members with offset in Abaqus CAE. Acta Polytechnica CTU Proceedings, 30, 36–40. https://doi.org/10.14311/APP.2021.30.0036
   Google Scholar
• Kumar, S., & Shahi, A. S. (2011). Effect of heat input on the microstructure and mechanical properties of gas tungsten arc welded AISI 304 stainless steel joints. Materials & Design, 32(6), 3617–3623. https://doi.org/10.1016/j.matdes.2011.02.017
   Web of Science ®Google Scholar
• Li, Y., Fan, W., Lu, C., Gao, Z., Ma, X., Jin, W., Ye, Y., & Wang, F. (2019). Microstructure and mechanical properties of 34CrMo4 Steel for Gas Cylinders formed by hot drawing and flow forming. Materials, 12(8), 1351. https://doi.org/10.3390/ma12081351
   PubMed Web of Science ®Google Scholar
• Li, S., He, M., Hu, G., Tian, Y., Wang, C., Jing, B., & Ping, D. (2022). Pearlite formation via martensite, composites part B. Engineering, 238, 109859. ISSN 1359-8368. https://doi.org/10.1016/j.compositesb.2022.109859
   Web of Science ®Google Scholar
• Logesh, M., Kumar, M., Shankaranarayana, D. V., Sathyamurthy, R., & Dhanapal, B. (2022). A numerical analysis of friction stir welded joint using FEA. Materials Today: Proceedings, 62, 2362–2369. https://doi.org/10.1016/j.matpr.2022.04.850
   Google Scholar
• Maharjan, N., Zhou, W., & Wu, N. (2020). Direct laser hardening of AISI 1020 steel under controlled gas atmosphere. Surface & Coatings Technology, 385(December 2019), 125399. https://doi.org/10.1016/j.surfcoat.2020.125399
   Google Scholar
• Mates, S., Stoudt, M., & Gangireddy, S. (2016). Measuring the Influence of Pearlite Dissolution on the Transient Dynamic Strength of Rapidly Heated Plain Carbon Steels. journal Materials Science, 68(7), 1832–1838. https://doi.org/10.1007/s11837-016-1951-9
   Google Scholar
• Odiaka, T., Akinlabi, S. A., Madushele, N., Fatoba, O. S., Hassan, S., & Akinlabi, E. T. Statistical analysis of the effect of welding parameters on the tensile strength of titanium reinforced mild steel joints using taguchi’s DoE. (2020). Materials Today: Proceedings, 44(December), 1202–1206. 2021. https://doi.org/10.1016/j.matpr.2020.11.240
   Google Scholar
• Pandey, C., Mahapatra, M. M., Kumar, P., Kumar, S., & Sirohi, S. (2019). Effect of post weld heat treatments on microstructure evolution and type IV cracking behavior of the P91 steel welds joint. Journal of Materials Processing Technology, 266, 140–154. https://doi.org/10.1016/j.jmatprotec.2018.10.024
   Web of Science ®Google Scholar
• Panigrahi, B. K., Srikanth, S., & Sahoo, G. (2009). Effect of alloying elements on tensile properties, microstructure, and corrosion resistance of reinforcing bar steel. Journal of Materials Engineering and Performance, 18(8), 1102–1108. https://doi.org/10.1007/s11665-008-9336-z
   Web of Science ®Google Scholar
• Reisgen, U., Schleser, M., Mokrov, O., & Ahmed, E. (2011). Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel. Isij International, 51(3), 429–434. https://doi.org/10.2355/isijinternational.51.429
   Web of Science ®Google Scholar
• Shahrier, F., Eva, I. J., Afrin, M., Alam, C. S., & Rashid, A. R. M. H. (2020). Literature Review on LCA of LPG as a Transportation and Cooking Fuel. Proc. Int. Conf. Ind. Mech. Eng. Oper. Manag, Dhaka, Bangladesh (pp. 1–7). IOEM Society.
   Google Scholar
• Singh, A., & Singh, R. P. (2019). A review of effect of welding parameters on the mechanical properties of weld in submerged Arc welding process, Mater. Materials Today: Proceedings, 26, 1714–1717. https://doi.org/10.1016/j.matpr.2020.02.361
   Google Scholar
• Subramaniyan, M. K., Veeman, D., Nallathambhi, S. S., & Thanigainathan, S. (2022). Gas Tungsten arc welding of Ti-6Al-4V sheet for pressure vessels used in aerospace application: A detailed characterization of weldment. International Journal of Pressure Vessels and Piping, 200(August), 104787. https://doi.org/10.1016/j.ijpvp.2022.104787
   Google Scholar
• Susmitha, P., Arun, P. A., & Sharma, M. (2022). A Study on Safety and Operational Procedures for Filling of Cylinders in an LPG Bottling Plant as per OISD-144. Advances in Sustainable Development: Proceedings of HSFEA 2020 (pp. 29–39). Springer Singapore.
   Google Scholar
• Tom, A., Pius, G. M., Joseph, G., Jose, J., & Joseph, M. J. (2014). Design and analysis of lpg cylinder. International Journal of Engineering & Applied Sciences, 6(2), 17–17. https://doi.org/10.24107/ijeas.251225
   Google Scholar
• Vander Voort, G. F. (2015). Interlamellar spacingof pearlite. Practical Metallographie, 52(8), 419–436. https://doi.org/10.3139/147.110357
   Google Scholar
• Wang, Z. Q. (2017). Effect of Ni content on the microstructure and mechanical properties of weld metal with both-side submerged arc welding technique, “Mater. Materials Characterization, 138, 67–77. https://doi.org/10.1016/j.matchar.2018.01.039
   Web of Science ®Google Scholar
• Xiao, J. K., Tan, H., Chen, J., Martini, A., & Zang, C. (2020). Effect of carbon content on microstructure, hardness and wear resistance of CoCrFeMnNiCx high entropy alloys. Journal of Alloys and Compounds, 847, 156533. https://doi.org/10.1016/j.jallcom.2020.156533
   Web of Science ®Google Scholar
• Yu, W. X., Liu, B. X., Chen, C. X., Liu, M. Y., Zhang, X., Fang, W., Ji, P. G., He, J. N., & Yin, F. X. (2020). Microstructure and mechanical properties of stainless steel clad plate welding joints by different welding processes. Science and Technology of Welding and Joining, 25(7), 571–580. https://doi.org/10.1080/13621718.2020.1774995
   Web of Science ®Google Scholar