Wear estimation at the contact surfaces of oval shaped hip implants using finite element analysis

References

• Agarwal, A. K., Pramanik, S., Kumar Agarwal, A., Rai, K. N. Chronology of total hip replacement and materials development Chronology of Total Hip Joint Replacement and Materials Development. 2005.
   Google Scholar
• ASTM. (2015). Standard Practice for Finite Element Analysis (FEA) of non-modular metallic orthopaedic hip femoral stems 1.
   Google Scholar
• Babaniamansour, P., Ebrahimian-Hosseinabadi, M., & Zargar-Kharazi, A. (2017). Designing an optimized novel femoral stem. Journal of Medical Signals and Sensors, 7(3), 170.
   PubMedGoogle Scholar
• Bhawe, A. K., Shah, K. M., Somani, S., Shenoy B, S., Bhat N, S., Zuber, M., & K N, C. (2022). Static structural analysis of the effect of change in femoral head sizes used in total hip arthroplasty using finite element method. Cogent Engineering, 9(1). https://doi.org/10.1080/23311916.2022.2027080
   Web of Science ®Google Scholar
• Chen, D. W., Lee, M. S., Lin, C.-L. (2018). Finite Element Analysis of Stresses from Hip Implants with Different Head Sizes.
   Google Scholar
• Chethan, K. N., Ogulcan, G., Zuber, M., Shenoy, S., & Shenoy b, S. (2020). Wear estimation of trapezoidal and circular shaped hip implants along with varying taper trunnion radiuses using finite element method. Computer Methods and Programs in Biomedicine, 196, 105597. https://doi.org/10.1016/j.cmpb.2020.105597
   PubMed Web of Science ®Google Scholar
• Chethan, K. N., Shyamasunder Bhat, N, & Satish Shenoy, B (2014). Biomechanics of hip joint: A review. International Journal of Biomedical Engineering and Technology, 15(4), 341. https://doi.org/10.1504/IJBET.2014.064824
   Google Scholar
• Chethan, K. N., Shyamasunder Bhat, N., Zuber, M., & Satish Shenoy, B. (2021). Finite element analysis of hip implant with varying in taper neck lengths under static loading conditions. Computer Methods and Programs in Biomedicine, 208, 106273. https://doi.org/10.1016/j.cmpb.2021.106273
   PubMed Web of Science ®Google Scholar
• Chethan, K. N., Zuber, M., Bhat, S. N., & Shenoy, S. B. (2019). Comparative study of femur bone having different boundary conditions and bone structure using finite element method. The Open Biomedical Engineering Journal, 12(1), 115–14. https://doi.org/10.2174/1874120701812010115
   Google Scholar
• Chethan, K. N., Zuber, M., Shyamasunder, B. N., Satish, S. B., & Shepherd, D. (2020). Optimized trapezoidal-shaped hip implant for total hip arthroplasty using finite element analysis. Cogent Engineering, 7(1), 1–18. https://doi.org/10.1080/23311916.2020.1719575
   Web of Science ®Google Scholar
• Chethan, B. N. S., Zuber, M., S, S. B., & Shenoy B, S. (2022). Evolution of different designs and wear studies in total hip prosthesis using finite element analysis: A review. Cogent Engineering, 9(1). https://doi.org/10.1080/23311916.2022.2027081
   Web of Science ®Google Scholar
• Clarke, B. (2008). Normal bone anatomy and physiology. Clinical Journal of the American Society of Nephrology: CJASN, 3 Suppl 3(Supplement_3), S131–S139. https://doi.org/10.2215/CJN.04151206
   PubMedGoogle Scholar
• Colic, K., & Sedmak, A. (2016). The current approach to research and design of the artificial hip prosthesis: A review. Rheumatology and Orthopedic Medicine, 1(1). https://doi.org/10.15761/ROM.1000106
   Google Scholar
• Das, S. S., & Chakraborti, P. (2018). Development of biomaterial for total hip joint replacement. Proceedings of the IOP Conference Series: Materials Science and Engineering Sikkim, India, (Vol. 377, No. (1), pp. 012177). IOP Publishing.
   Google Scholar
• David, E. K., Robbins, C. E., & Lavine, L. (1998). Hip Biomechanics During Gait.
   Google Scholar
• Delikanli, Y. E., & Kayacan, M. C. (2019). Design, manufacture, and fatigue analysis of lightweight hip implants. Journal of Applied Biomaterials and Functional Materials, 17(2), 228080001983683. https://doi.org/10.1177/2280800019836830
   Web of Science ®Google Scholar
• Foucher, K. C. (2016). Identifying clinically meaningful benchmarks for gait improvement after total hip arthroplasty. Journal of Orthopaedic Research, 34(1), 88–96. https://doi.org/10.1002/jor.22996
   PubMed Web of Science ®Google Scholar
• Griza, S., Zanon, G., Silva, E. P., Bertoni, F., Reguly, A., & Strohaecker, T. R. (2009). Design aspects involved in a cemented THA stem failure case. Engineering Failure Analysis, 16(1), 512–520. https://doi.org/10.1016/j.engfailanal.2008.06.016
   Web of Science ®Google Scholar
• Gutmann, C., Shaikh, N., Shenoy, B. S., Shaymasunder Bhat, N., Keni, L. G., K N, & Chethan, C. (2023). Wear estimation of hip implants with varying chamfer geometry at the trunnion junction: A finite element analysis. Biomedical Physics & Engineering Express, 9(3), 035004. https://doi.org/10.1088/2057-1976/acb710
   Web of Science ®Google Scholar
• Hampton, S. J., Andriacchi, T. P., & Galante, J. O. (1980). Three dimensional stress analysis of the femoral stem of a total hip prosthesis. Journal of Biomechanics, 13(5), 443–448. https://doi.org/10.1016/0021-9290(80)90038-X
   PubMed Web of Science ®Google Scholar
• Herrmann, S., Kaehler, M., Souffrant, R., Rachholz, R., Zierath, J., Kluess, D., Mittelmeier, W., Woernle, C., & Bader, R. (2012). HiL simulation in biomechanics: A new approach for testing total joint replacements. Computer Methods and Programs in Biomedicine, 105(2), 109–119. https://doi.org/10.1016/j.cmpb.2011.07.012
   PubMed Web of Science ®Google Scholar
• Hodge, W. A., Fujant, R. S., Carlsont, K. L., Burgesst, R. G., Harris, W. H., Manntt, R. W. (1986). Contact pressures in the human hip joint measured in vivo (synovial joints/osteoarthritis/postsurgical rehabilitation/Joint replacement prostheses/gait analysis).
   Google Scholar
• Hua, X., Li, J., De Pieri, E., & Ferguson, S. J. (2022). Multiscale biomechanics of the biphasic articular cartilage in the natural hip joint during routine activities. Computer Methods and Programs in Biomedicine, 215, 106606. https://doi.org/10.1016/j.cmpb.2021.106606
   PubMed Web of Science ®Google Scholar
• HUNG, J.-P., & JS-S, W. U. (2002). A comparative study on wear behavior of hip prosthesis by finite element simulation. Biomedical Engineering: Applications, Basis and Communications, 14(4), 139–148. https://doi.org/10.4015/S1016237202000218
   Google Scholar
• Hu, C. Y., & Yoon, T. R. (2018). Recent updates for biomaterials used in total hip arthroplasty. Biomaterials Research, 22(1), 1–12. https://doi.org/10.1186/s40824-018-0144-8
   PubMedGoogle Scholar
• Jiang, H. (2007). Static and Dynamic Mechanics Analysis on Artificial Hip Joints with Different Interface Designs by the Finite Element Method. Journal of Bionic Engineering, 4(2), 123–131. https://doi.org/10.1016/S1672-6529(07)60024-9
   Web of Science ®Google Scholar
• Jun, Y., & Choi, K. (2010). Design of patient-specific hip implants based on the 3D geometry of the human femur. Advances in Engineering Software, 41(4), 537–547. https://doi.org/10.1016/j.advengsoft.2009.10.016
   Web of Science ®Google Scholar
• Kandemir, G., Smith, S., & Joyce, T. J. (2018). The influence of contact stress on the wear of cross-linked polyethylene. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232(10), 1008–1016. https://doi.org/10.1177/0954411918796047
   PubMed Web of Science ®Google Scholar
• Kim, J. T., & Yoo, J. J. (2016). Implant design in cementless hip arthroplasty. Hip & Pelvis, 28(2), 65. https://doi.org/10.5371/hp.2016.28.2.65
   PubMedGoogle Scholar
• Koch, F. W., Koch, A. K., Amling, M., & Hahn, M. (2018). Histopathologische Befunde am Interface einer künstlichen Hüftpfanne mit einer 3D-Titannetz-Beschichtung nach einer Standzeit von 27 Jahren. Osteologie, 27(3), 165–171. https://doi.org/10.1055/s-0038-1673539
   Google Scholar
• Korhonen, R. K., Koistinen, A., Konttinen, Y. T., Santavirta, S. S., & Lappalainen, R. (2005). The effect of geometry and abduction angle on the stresses in cemented UHMWPE acetabular cups – finite element simulations and experimental tests. BioMedical Engineering Online, 4(1). https://doi.org/10.1186/1475-925X-4-32
   PubMedGoogle Scholar
• Kottan, N., Gowtham, N. H., & Basu, B. (2022). Development and validation of a finite element model of wear in UHMWPE liner using experimental data from hip simulator studies. Journal of Biomechanical Engineering, 144(3). https://doi.org/10.1115/1.4052373
   PubMed Web of Science ®Google Scholar
• Lunn, D. E., Chapman, G. J., & Redmond, A. C. (2019). Hip kinematics and kinetics in total hip replacement patients stratified by age and functional capacity. Journal of Biomechanics, 87, 19–27. https://doi.org/10.1016/j.jbiomech.2019.02.002
   PubMed Web of Science ®Google Scholar
• Merola, M., & Affatato, S. (2019). Materials for hip prostheses: A review of wear and loading considerations. Materials, 12(3), 495. https://doi.org/10.3390/ma12030495
   PubMed Web of Science ®Google Scholar
• Monif, M. M. (2012). Finite element study on the predicted equivalent stresses in the artificial hip joint. Journal of Biomedical Science and Engineering, 05(2), 43–51. https://doi.org/10.4236/jbise.2012.52007
   Google Scholar
• Morlock, M. M., Bishop, N., & Huber, G. (2011). Biomechanics of hip arthroplasty. In Tribology in Total Hip Arthroplasty (pp. 11–24). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-642-19429-0_2
   Google Scholar
• Pickering, S., Donnelly, B., & Crawford, R. (2009). Computerized Hip Navigation. Surgical Treatment of Hip Arthritis: Reconstruction, Replacement, and Revision, 445–455. https://doi.org/10.1016/B978-1-4160-5898-4.00060-4
   Google Scholar
• Rixrath, E., Wendling-Mansuy, S., Flecher, X., Chabrand, P., & Argenson, J. N. (2008). Design parameters dependences on contact stress distribution in gait and jogging phases after total hip arthroplasty. Journal of Biomechanics, 41(5), 1137–1142. https://doi.org/10.1016/j.jbiomech.2007.12.009
   PubMed Web of Science ®Google Scholar
• Saputra, E., Anwar, I. B., Jamari, J., & Van Der Heide, E. (2013). Finite element analysis of artificial hip joint movement during human activities. Procedia Engineering, 68, 102–108. https://doi.org/10.1016/j.proeng.2013.12.154
   Google Scholar
• Shi, B., Ajayi, O. O., Fenske, G., Erdemir, A., & Liang, H. (2003). Tribological performance of some alternative bearing materials for artificial joints. Wear, 255(7–12), 1015–1021. https://doi.org/10.1016/S0043-1648(03)00276-X
   Web of Science ®Google Scholar
• Shrestha, S. (2017). Wear behavior of Ti-6Al-4V for Joint Implants manufactured by Electron Beam Melting.
   Google Scholar
• Šťastný, E., Trč, T., Handl, M., Kos, P., Kautzner, J., Philippou, T., & Lisý, J. (2014). Mid-term results of revision total hip arthroplasty using the oval-shaped uncemented Trč-Cingr cup. International Orthopaedics, 38(5), 935–940. Epub 2014 Jan 16. PMID: 24430429; PMCID: PMC3997770. https://doi.org/10.1007/s00264-013-2269-7
   PubMed Web of Science ®Google Scholar
• The, B., Hosman, A., Kootstra, J., Kralj-Iglic, V., Flivik, G., Verdonschot, N., & Diercks, R. (2008). Association between contact hip stress and RSA-measured wear rates in total hip arthroplasties of 31 patients. Journal of Biomechanics, 41(1), 100–105. https://doi.org/10.1016/j.jbiomech.2007.07.010
   PubMed Web of Science ®Google Scholar
• Wang, Q. J., & Chung, Y. (Eds.) (2013). Encyclopedia of Tribology. Springer US. https://doi.org/10.1007/978-0-387-92897-5
   Google Scholar
• Wu, J. S., Hung, J. P., Shu, C. S., & Chen, J. H. (2003). The computer simulation of wear behavior appearing in total hip prosthesis. Computer Methods and Programs in Biomedicine, 70(1), 81–91. PMID: 12468129. https://doi.org/10.1016/s0169-2607(01)00199-7
   PubMed Web of Science ®Google Scholar
• Zeman, J., Ranuša, M., Vrbka, M., Gallo, J., Křupka, I., & Hartl, M. (2018). UHMWPE acetabular cup creep deformation during the run-in phase of THA’s life cycle. Journal of the Mechanical Behavior of Biomedical Materials, 87, 30–39. https://doi.org/10.1016/j.jmbbm.2018.07.015
   PubMed Web of Science ®Google Scholar