High-temperature dry sliding wear behaviour of pre-aged 3-step T6-treated Al7075 hybrid matrix composite

References

• Akash, R., Amar, S., Rajesh, G. L., Hiremath, V. & Auradi, V., High temperature wear properties of artificially aged 6061Al/B4CpMetal matrix composite, Materials Today: Proceedings 5. (2018) 16080–20
   Google Scholar
• Alphonse, M., Raja, V. K. B., Vivek, M. S., Raj, N. V. S. D., Darshan, M. S. S., Bharmal, P., Effect of heat treatment on mechanical properties of forged aluminium alloy AA2219, Materials Today: Proceedings 44. (2021) 3811–3815
   Google Scholar
• Ayyanar, S., Gnanavvelbabu, A., Rajkumar, K., & Loganathan, P. (2021). Studies on High Temperature Wear and Friction Behaviour ofAA6061/B4C/hBN Hybrid Composites. Metals and Materials International, 27, 3040–3057. https://doi.org/10.1007/s12540-020-00710-z
   Web of Science ®Google Scholar
• Deaquino-Lara, R., Estrada-Guel, I., Hinojosa-Ruiz, G., Flores-Campos, R., Herrera-Ramírez, J. M., & Martínez-Sánchez, R. (2011). Synthesis of aluminium alloy 7075-graphite composites by milling processes and hot extrusion. Journal of Alloys and Compounds, 509, S284–S289. https://doi.org/10.1016/j.jallcom.2010.11.183
   Web of Science ®Google Scholar
• Deaquino-Lara, R., Soltani, N., Bahrami, A., Castañeda, E. G., García-Sánchez, E., & Hernandez-Rodríguez, M. A. (2015). Tribological characterization of Al7075–graphite composites fabricated by mechanical alloying and hot extrusion. Materials & Design, 67, 224–231. https://doi.org/10.1016/j.matdes.2014.11.045
   Web of Science ®Google Scholar
• Fageehi, Y. A., Saminathan, R., Venugopal, G., Valder, J., & Hemanth Kumar, K. S. R. (2021). Effect of thermal and surface chemical treatment on the cyclic oxidation behavior of 7039 aluminum alloy used in aerospace armor applications. Materials Today: Proceedings, 42(2), 343–349. https://doi.org/10.1016/j.matpr.2020.09.547
   Google Scholar
• Gowrishankar, M. C., Shivapraakash, Y. M., Siddesh Kumar, N., Siddhartha, M., & Dutta, A. (2019, April). Experimental investigation on silicon carbide reinforced duralumin based MMC produced by cold compacting. International Journal of Mechanical and Production Engineering Research and Development, 9(2), 493–510. https://doi.org/10.24247/ijmperdapr201949
   Google Scholar
• Jiang, F., Huang, J., Jiang, Y., & Xu, C. (2021). Effects of quenching rate and over-aging on microstructures, mechanical properties and corrosion resistance of an Al-Zn-Mg (7046A) alloy. Journal of Alloys and Compounds, 854, 157272. https://doi.org/10.1016/j.jallcom.2020.157272
   Web of Science ®Google Scholar
• Kumar, G. V., Rao, C. S., & Selvaraj, N. (2012). Mechanical and dry sliding wear behavior of Al7075 alloy-reinforced with SiC particles. Journal of Composite Materials, 46(10), 1201–1209. https://doi.org/10.1177/0021998311414948
   Web of Science ®Google Scholar
• Lal, S., Kumar, S., Khan, Z. A., & Siddiquee, A. N. (2014). Wire electrical discharge machining of AA7075/SiC/Al2O3 hybrid composite fabricated by inert gas-assisted electromagnetic stir-casting process. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 36(2), 335–346. https://doi.org/10.1007/s40430-013-0087-x
   Web of Science ®Google Scholar
• Lee, Y.-S., Koh, D.-H., Kim, H.-W., & Ahn, Y.-S. (2018). Improved bakehardening response of Al-Zn-Mg-Cu alloy through pre-aging treatment. Scripta materialia, 147, 45–49. https://doi.org/10.1016/j.scriptamat.2017.12.030
   Web of Science ®Google Scholar
• Li, P., Li, Y., Wu, Y., Ma, G., & Liu, X. (2012). Materials Science and Engineering: A, 546(1), 146–152. https://doi.org/10.1016/j.msea.2012.03.042
   Google Scholar
• Li, J., Peng, Z., Li, C., Jia, Z., Chen, W., & Zheng, Z. (2008). Mechanical properties, corrosion behaviors and microstructures of 7075 aluminium alloy with various aging treatments. Transactions of Nonferrous Metals Society of China, 18(4), 755–762. https://doi.org/10.1016/S1003-6326(08)60130-2
   Web of Science ®Google Scholar
• Liu, B., Mao Huang, W., Wei Wang, H., Ming Liang, W., & Li, X. F. (2010). Transactions of the Nonferrous Metals Society of China, 23, 2826–2832.
   Google Scholar
• Liu, S., Wang, Y., Muthuramalingam, T., & Anbuchezhiyan, G. (2019). Effect of B4C and MoS2 reinforcement on micro structure and wear properties of aluminium hybrid composite for automotive applications. Composites Part B: Engineering, 176, 107329. https://doi.org/10.1016/j.compositesb.2019.107329
   Web of Science ®Google Scholar
• Liu, S., Zhang, M., Li, Q., Zhu, Q., Song, H., Wu, X., Cao, L., & Couper, M. J. (2020). Effect of quenching rate on strengthening behavior of an Al-Zn-Mg-Cu alloy during natural ageing. Materials Science and Engineering: A, 793, 139900. https://doi.org/10.1016/j.msea.2020.139900
   Web of Science ®Google Scholar
• Liu, Z., Zhaoxin, D., Jiang, H., Gong, T., Cui, X., Liu, J., & Cheng, J. Microstructure evolution and corresponding tensile properties of Ti–5Al–5Mo–5V–1Cr–1Fe alloy controlling by multi-heat treatments. Progress in Natural Science: Materials International, 31(5), 731–741. https://doi.org/10.1016/j.pnsc.2021.08.008
   Web of Science ®Google Scholar
• Loganathan, P., Gnanavelbabu, A., & Rajkumar, K. (2020). Influence of ZrB2/hBN particles on the wear behaviour of AA7075 composites fabricated through stir followed by squeeze cast technique. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235(1), 1350650120929501. https://doi.org/10.1177/135065012092
   Web of Science ®Google Scholar
• Loganathan, P., Gnanavelbabu, A., & Rajkumar, K. (2021). Effect of TiB2 particles on high temperature wear and friction behaviour of AA7075 composites fabricated through squeeze cast technique. Proceedings of the Materials Today, 45, 7859–7864.
   Google Scholar
• Manoj, M. K., & Gadpale, V. (2019). Synthesis, characterization and dry sliding wear behaviour of Al 7075–MoSi2 composites prepared by stir casting technique. Transactions of the Indian Institute of Metals, 72(12), 3153–3169. https://doi.org/10.1007/s12666-019-01781-2
   Web of Science ®Google Scholar
• Mistry, J. M., & Gohil, P. P. (2017). An overview of diversified reinforcement on aluminium metal matrix composites: Tribological aspects. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 231(3), 399–421. https://doi.org/10.1177/1350650116658572
   Web of Science ®Google Scholar
• Omer, K., Abolhasani, A., Kim, S., Nikdejad, T., Butcher, C., Wells, M., Esmaeili, S., & Worswick, M. (2018). Process parameters for hot stamping of AA7075 and D-7xxx to achieve high performance aged products. Journal of Materials Processing Technology, 257, 170–179. https://doi.org/10.1016/j.jmatprotec.2018.02.039
   Web of Science ®Google Scholar
• Osterreicher, J. A., Kirov, G., Gerstl, S. S., Mukeli, E., Grabner, F., & Kumar, M. (2018). Stabilization of 7xxx aluminium alloys. Journal of Alloys and Compounds, 740, 167–173. https://doi.org/10.1016/j.jallcom.2018.01.003
   Web of Science ®Google Scholar
• Osterreicher, J. A., Tunes, M. A., Grabner, F., Arnoldt, A., Kremmer, T., Pogatscher, S., & Schlögl, C. M. (2020). Warm-forming of pre-aged Al-Zn-Mg-Cu alloy sheet. Materials & Design, 193, 108837. https://doi.org/10.1016/j.matdes.2020.108837
   Web of Science ®Google Scholar
• Panda, K. B., & Chandran, K. R. (2006). Determination of elastic constants of titanium diboride (TiB2) from first principles using FLAPW implementation of the density functional theory. Computational Materials Science, 35(2), 134–150. https://doi.org/10.1016/j.commatsci.2005.03.012
   Web of Science ®Google Scholar
• Peng, J., Jin, X., Xu, Z., Zhang, J., Cai, Z., Luo, Z., & Zhu, M. (2018). Study on the damage evolution of torsional fretting fatigue in a 7075 aluminium alloy. Wear, 402, 160–168. https://doi.org/10.1016/j.wear.2018.02.008
   Web of Science ®Google Scholar
• Ramadoss, N., Pazhanivel, K., & Anbuchezhiyan, G. (2020). Synthesis of B4C and BN reinforced Al7075 hybrid composites using stir casting method. Journal of Materials Research and Technology, 9(3), 6297–6304. https://doi.org/10.1016/j.jmrt.2020.03.043
   Google Scholar
• Rama Rao, S., & Padmanabhan, G. (2012). Fabrication and mechanical properties of aluminium-boron carbide composites. International Journal of Materials and Biomaterials Applications, 2(3), 15–18.
   PubMedGoogle Scholar
• Rana, H., & Badheka, V. (2019). Elucidation of the role of rotation speed and stirring direction on AA7075-B4C surface composites formulated by friction stir processing. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 233(5), 977–994. https://doi.org/10.1177/1464420717736548
   Web of Science ®Google Scholar
• Shen, Q., Wu, C., Luo, F., Fang, P., Li, C., Wang, Y., & Zhang, L. (2014). Microstructure and mechanical properties of Al-7075/B4C composites fabricated by plasma activated sintering. Journal of Alloys and Compounds, 588, 265–270. https://doi.org/10.1016/j.jallcom.2013.11.089
   Web of Science ®Google Scholar
• Shivaprakash, Y. M., Gurumurthy, B. M., Hiremath, P., Sharma, S., & Sowrabh, B. S. (2022). Spider web approach hardness validation of peak aged Al6061/SiC/h-BN composite and related mechanical characterization. Manufacturing Review, 9, 24. https://doi.org/10.1051/mfreview/2022021
   Web of Science ®Google Scholar
• Shivaprakash, Y. M., Gurumurthy, B. M., Siddhartha, M. A., Sidddesh Kumar, N. M., & Dutta, A. (2019, April). Studies on mild steel particulates reinforced duralumin composite fabricated through powder metallurgy route. International Journal of Mechanical and Production Engineering Research and Development, 9(2), 903–920.
   Google Scholar
• Siddesh Kumar, N. G., Suresh, R., & Shiva Shankar, G. S. (2020). High temperature wear behavior of Al2219/n-B4C/MoS2 hybrid metal matrix composites. Composites Communications, 19, 61–73. https://doi.org/10.1016/j.coco.2020.02.011
   Web of Science ®Google Scholar
• Sowrabh, B. S., Gurumurthy, B. M., Shivaprakash, Y. M., & Shankara Sharma, S. (2021). Reinforcements, production techniques and property analysis of AA7075 matrix composites − a critical review. Manufacturing Review, 8(31), 31. https://doi.org/10.1051/mfreview/2021029
   Google Scholar
• Sowrabh, B. S., Gurumurthy, B. M., & Shivaprakash, Y. M. Sathya Shankara Sharma. (2023). Characterization studies on 7075 Aluminium Alloy under as-cast and in multiple step T6 conditions. Journal of the Institution of Engineers (India): Series C, https://doi.org/10.1007/s40032-022-00909-6
   Google Scholar
• Stemper, L., Tunes M A, Dumitraschkewitz P, Mendez-Martin F, Tosone R, Marchand D, Curtin W A, Uggowitzer P J, Pogatscher S. (2021). Giant hardening response in AlMgZn(Cu) alloys. Acta Materialia, 206, 116617. https://doi.org/10.1016/j.actamat.2020.116617
   Web of Science ®Google Scholar
• Suganeswaran, K., Parameshwaran, R., Mohanraj, T., & Radhika, N. (2020). Influence of secondary phase particles Al2O3/SiC on the microstructure and tribological characteristics of AA7075-based surface hybrid composites tailored using friction stir processing. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235(1), 161–178. https://doi.org/10.1177/0954406220932939
   Web of Science ®Google Scholar
• Toptan, F., Kilicarslan, A., & Kerti, I. (2010). The Effect of Ti Addition on the Properties of Al-B4C Interface: A Microstructural Study. MSF, 636–637, 192–197. https://doi.org/10.4028/636-637.192
   Google Scholar
• Wolverton, C. (2001). Crystal structure and stability of complex precipitate phases in AleCueMge(Si) and AleZneMg alloys. Acta Materialia, 49(16), 3129e42. https://doi.org/10.1016/S1359-6454(01)00229-4
   Web of Science ®Google Scholar
• Wu, C., Fang, P., Luo, G., Chen, F., Shen, Q., Zhang, L., & Lavernia, E. J. (2014). Effect of plasma activated sintering parameters on microstructure and mechanical properties of Al-7075/B4C composites. Journal of Alloys and Compounds, 615, 276–282. https://doi.org/10.1016/j.jallcom.2014.06.110
   Web of Science ®Google Scholar
• Zhang, Z., Deng, Y., Ye, L., Zhu, W., Wang, F., Jiang, K., & Guo, X. (2020). Influence of aging treatments on the strength and localized corrosion resistance of aged Al-Zn-Mg-Cu alloy. Journal of Alloys and Compounds, 846, 156223. https://doi.org/10.1016/j.jallcom.2020.156223
   Web of Science ®Google Scholar
• Zhou, L., Chen, K., Chen, S., Ding, Y., & Fan, S. (2021). Correlation between stress corrosion cracking resistance and grain-boundary precipitates of a new generation high Zn-containing 7056 aluminum alloy by non-isothermal aging and re-aging heat treatment. Journal of Alloys and Compounds, 850, 156717. https://doi.org/10.1016/j.jallcom.2020.156717
   Web of Science ®Google Scholar