Mechanical properties analyses of bolted joint of Kusha and Nacha fiber composite laminates

References

• Al-Oqla, F. M., Sapuan, S. M., Ishak, M. R., & Nuraini, A. A. (2015). Predicting the potential of agro waste fibers for sustainable automotive industry using a decision making model. Computers and Electronics in Agriculture, 113, 116–19. https://doi.org/10.1016/j.compag.2015.01.011
   Web of Science ®Google Scholar
• Babu, K. N., & Gupta, G. S. (2016). Theoretical and Experimental analysis of FRP composite bolted joint for rocket motors, 1–6.
   Google Scholar
• Balasubramanian, B., Raja, K., Vignesh Kumar, V., & Ganeshan, P. (2022). Characterization study of Holoptelea integrifolia tree bark fibres reinforced epoxy composites. Natural Product Research, 1–10. https://doi.org/10.1080/14786419.2022.2137505
   PubMed Web of Science ®Google Scholar
• Chandramohan, D., & Marimuthu, K. (2011). A review on natural fibers. International Journal of Research and Reviews Applied and Science, 8(2), 194–206.
   Google Scholar
• Çıplak, E., & Sayman, O. (2011). Failure load of mechanically fastened immersed composite laminated plates under a preloaded moment. Polymers and Polymer Composites, 19(1), 41–46. https://doi.org/10.1177/096739111101900107
   Web of Science ®Google Scholar
• Dass, A., & Chellamuthu, S. (2022). Physico chemical and mechanical properties of natural cellulosic water hyacinth fiber and Its composites. Journal of Natural Fibers, 19(15), 11413–11423. https://doi.org/10.1080/15440478.2022.2025979
   Web of Science ®Google Scholar
• Deli, A. A. (2016). Experimental and numerical investigation of date palm fiber Effect on natural frequency of composite plate with different B. Cs. 1163–1174.
   Google Scholar
• De Sousa, F. K. A., Ujike, I., & Kadota, A. (2016). Effect of different fiber angles for composite material with fiberglass reinforced on mechanical properties. International Journal of Mining, Metallurgy & Mechanical Engineering (IJMMME), 4(1).
   Google Scholar
• Engineering, M. (2016). Experimental Determination of bearing strength in fiber reinforced laminated composite bolted joints under Preload. Journal of Reinforced Plastics and Composites, 26(10), 1051–1063.
   Google Scholar
• Faruk, O., Bledzki, A. K., Fink, H. P., & Sain, M. (2014). Progress report on natural fiber reinforced composites. Macromolecular Materials and Engineering, 299(1), 9–26. https://doi.org/10.1002/mame.201300008
   Web of Science ®Google Scholar
• Gon, D., Das, K., Paul, P., & Maity, S. (2012). Jute composites as wood substitute. International Journal of Textile Science, 1(6), 84–93. https://doi.org/10.5923/j.textile.20120106.05
   Google Scholar
• Hossain, M. R., Islam, M. A., Vuurea, A. V., & Verpoest, I. (2013). Effect of fiber orientation on the tensile properties of jute epoxy laminated composite.
   Google Scholar
• Khalid, M. Y., Arif, Z. U., & Al Rashid, A. (2022). Investigation of tensile and flexural behavior of green composites along with their impact response at different energies. International Journal of Precision Engineering and Manufacturing-Green Technology, 9(5), 1399–1410. https://doi.org/10.1007/s40684-021-00385-w
   Web of Science ®Google Scholar
• Khalid, M. Y., Arif, Z. U., Sheikh, M. F., & Nasir, M. A. (2021). Mechanical characterization of glass and jute fiber-based hybrid composites fabricated through compression molding technique. International Journal of Material Forming, 14(5), 1085–1095. https://doi.org/10.1007/s12289-021-01624-w
   Web of Science ®Google Scholar
• Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015). A review on natural fiber reinforced polymer composite and its applications. International Journal of Polymer Science, 2015, 1–15. https://doi.org/10.1155/2015/243947
   Web of Science ®Google Scholar
• Muthukumar, V., Venkatasamy, R., Sureshbabu, A., & Arunkumar, D. (2011). A study on mechanical properties of natural fiber reinforced laminates of epoxy (Ly 556) polymer matrix composites. International Journal of Production Technology Management and Research, 67(2), 2229–3140.
   Google Scholar
• Mylsamy, K., & Rajendran, I. (2011). Influence of fibre length on the wear behaviour of chopped agave americana fibre reinforced epoxy composites. Tribology Letters, 44(1), 75–80. https://doi.org/10.1007/s11249-011-9829-z
   Web of Science ®Google Scholar
• Nagappan, S., Pavayee Subramani, S., Kumar Palaniappan, S., & Mylsamy, B. (2022). Impact of alkali treatment and fiber length on mechanical properties of new agro waste Lagenaria Siceraria fiber reinforced epoxy composites. Journal of Natural Fibers, 19(13), 6853–6864. https://doi.org/10.1080/15440478.2021.1932681
   Google Scholar
• Nirmal, U., Hashim, J., & Ahmad, M. M. (2015). A review on tribological performance of natural fibre polymeric composites. Tribology International, 83, 77–104. https://doi.org/10.1016/j.triboint.2014.11.003
   Web of Science ®Google Scholar
• Nirmal, U., Hashim, J., Lau, S. T., My, Y., & Yousif, B. F. (2012). Betel nut fibres as an alternative to glass fibres to reinforce thermoset composites: A comparative study. Textile Research Journal, 82(11), 1107–1120. https://doi.org/10.1177/0040517512439945
   Web of Science ®Google Scholar
• Nozawa, J. I., Komoto, T., Kawai, T., & Kumehara, H. (2009). Tribological properties of polymer-sheet-adhered metal hybrid gear. Wear, 266(9e10), 893e7. https://doi.org/10.1016/j.wear.2008.12.008
   Google Scholar
• Omrani, E., Menezes, P. L., & Rohatgi, P. K. (2016). State of the art on tribological behavior of polymer matrix composites reinforced with natural fibers in the green materials world. Engineering Science and Technology, an International Journal, 19(2), 717–736. https://doi.org/10.1016/j.jestch.2015.10.007
   Google Scholar
• Prasanna Venkatesh, R., Ramanathan, K., & Srinivasa Raman, V. (2016). Tensile, flexual, impact and water absorption properties of natural fibre reinforced polyester hybrid composites. Fibers & Textiles in Eastern Europe, 24(3), 90–94. https://doi.org/10.5604/12303666.1196617
   Web of Science ®Google Scholar
• Ramesh, M., Palanikumar, K., & Reddy, K. H. (2017). Plant fibre based bio-composites: Sustainable and renewable green materials. Renewable and Sustainable Energy Reviews, 79, 558–584. https://doi.org/10.1016/j.rser.2017.05.094
   Web of Science ®Google Scholar
• Rao, S. A. M. U. K., Design, M. M., & Coe, A. (2017). Failure Analysis of Unidirectional composite Pinned- joints. IJEDR1704023, 5(4), 139–147.
   Google Scholar
• Retnam, B. S. J., Sivapragash, M., & Pradeep, P. (2014). Effects of fibre orientation on mechanical properties of hybrid bamboo/glass fibre polymer composites. Bulletin of Materials Science, 37(5), 1059–1064. https://doi.org/10.1007/s12034-014-0045-y
   Web of Science ®Google Scholar
• Samuel, O. D., Agbo, S., & Adekanye, T. A. (2012). Assessing mechanical properties of natural fibre reinforced composites for Engineering applications. Journal of Minerals and Materials Characterization and Engineering, 11(08), 780–784. https://doi.org/10.4236/jmmce.2012.118066
   Google Scholar
• Selvaraj, M., Chapagain, P., & Mylsamy, B. (2023). Characterization studies on new natural cellulosic fiber extracted from the stem of Ageratina Adenophora plant. Journal of Natural Fibers, 20(1), 1. https://doi.org/10.1080/15440478.2022.2156019
   Web of Science ®Google Scholar
• Selvaraj, M., Pannirselvam, N., Ravichandran, P. T., Mylsamy, B., & Samson, S. (2023). Extraction and Characterization of a New natural cellulosic fiber from Bark of Ficus Carica plant as potential reinforcement for polymer composites. Journal of Natural Fibers, 20(2), 2. https://doi.org/10.1080/15440478.2023.2194699
   Web of Science ®Google Scholar
• Sen, F., & Pakdil, M. (2008). Effect of stacking sequences on failure behavior of pinned E- Glass/epoxy composite plates. Journal of Polytechnic, 11(2), 147–151. https://doi.org/10.2339/2008.11.2.147-151
   Google Scholar
• Singh, K., Saini, J. S., & Bhunia, H. (2017). Effect of metallic inserts on the strength of pin joints prepared from glass fiber reinforced composites. Defence Science Journal, 67(5), 592–600. https://doi.org/10.14429/dsj.67.11041
   Web of Science ®Google Scholar
• Sridevi, K. (2014). Development of mathematical models for determination of failure loads of glass epoxy composite plates with two parallel holes. International Journal of Mechanical Engineering and Robotics Research, 3(3), 700–705.
   Google Scholar
• Sutharson, B., Rajendran, M., & Sarala, R. (2013). Modeling and simulation of polymer composite laminate bolted joint. International Journal of Engineering and Technology, 5(5), 4227–4233.
   Google Scholar
• Tserpes, K. I., Labeas, G., Papanikos, P., & Kermanidis, T. (2002). Strength prediction of bolted joints in graphite/epoxy composite laminates. Composites Part B: Engineering, 33(7), 521–529. https://doi.org/10.1016/S1359-8368(02)00033-1
   Web of Science ®Google Scholar
• Ullah Arif, Z., Yasir Khalid, M., Ahmed, W., Arshad, H., & Ullah, S. (2022). Recycling of the glass/carbon fibre reinforced polymer composites: A step towards the circular economy. Polymer-Plastics Technology & Materials, 61(7), 761–788. https://doi.org/10.1080/25740881.2021.2015781
   Web of Science ®Google Scholar
• Whitworth, H. A., Othieno, M., & Barton, O. (2003). Failure Analysis of Single Pin Loaded E-Glass Epoxy Composite Plate, 59(2), 647–656. https://doi.org/10.1016/S0263-8223(02)00056-9
   Google Scholar
• Yasir Khalid, M., Ullah Arif, Z., Ahmed, W., & Arshad, H. (2022). Recent trends in recycling and reusing techniques of different plastic polymers and their composite materials. Sustainable Materials and Technologies, 31, e00382. https://doi.org/10.1016/j.susmat.2021.e00382
   Web of Science ®Google Scholar
• Yasir Khalid, M., Ullah Arif, Z., Al Rashid, A., Ihsan Shahid, M., Ahmed, W., Faraz Tariq, A., & Abbas, Z. (2021). Interlaminar shear strength (ILSS) characterization of fiber metal laminates (FMLs) manufactured through VARTM process. Forces in Mechanics, 4, 100038. https://doi.org/10.1016/j.finmec.2021.100038
   Google Scholar
• Yuhazri, M. Y., Phongsakorn, P. T., Sihombing, H., Jeefferie, A. R., Perumal, P., Kamarul, A. M., & Rassiah, K. (2011). Mechanical properties of Kenaf/polyester composites. International Journal of Engineering and Technology, 11(1), 127–131.
   Google Scholar