Preventing environmental and health problems due to LPG transport tank leaks: fatigue and crack behavior of heat-treated steel investigation

References

• Abidi, M. H., Moiduddin, K., Siddiquee, A. N., Mian, S. H., & Mohammed, M. K. (2023). Development of aluminium metal foams via friction stir processing by utilizing MgCO3 precursor. Coatings, 13(1), 162. https://doi.org/10.3390/coatings13010162
   Web of Science ®Google Scholar
• Ammarullah, M., Santoso, G., Sugiharto, S., Supriyono, T., Wibowo, D., Kurdi, O., Tauviqirrahman, M., & Jamari, J. (2022). Minimizing risk of failure from ceramic-on-ceramic total hip prosthesis by selecting ceramic materials based on tresca stress. Sustainability, 14(20), 13413. https://doi.org/10.3390/su142013413
   Web of Science ®Google Scholar
• Apriansyah, A., Chandra, H., Pratiwi, D. K., & Firdaus, A. (2021). Fatigue failure on drilling pipe thread: A case study on drill pipe Ss105. Indonesian Journal of Engineering and Science, 1(1), 011–019. https://doi.org/10.51630/ijes.v1i1.6
   Google Scholar
• Baigonakova, G., Marchenko, E., Kovaleva, M., & Vorozhtsov, A. (2022). Influence of wire geometry on the mechanical behavior of the TiNi esign. Metals (Basel), 12(7), 1131. https://doi.org/10.3390/met12071131
   Web of Science ®Google Scholar
• Banis, A., Hernandez Duran, E., Bliznuk, V., Sabirov, I., Petrov, R. H., & Papaefthymiou, S. (2019). The effect of ultra-fast heating on the microstructure, grain size and texture evolution of a commercial low-C, medium-Mn DP steel. Metals (Basel), 9(8), 877. https://doi.org/10.3390/met9080877
   Web of Science ®Google Scholar
• Braun, M., Fischer, C., Baumgartner, J., Hecht, M., & Varfolomeev, I. (2022). Fatigue crack initiation and propagation relation of notched specimens with welded joint characteristics. Metals (Basel), 12(4), 615. https://doi.org/10.3390/met12040615
   Web of Science ®Google Scholar
• Chandra, H, Dahlan, H, Paramitha Eka Utami, N, Tito, A, & Warizal. (2021). Increase the toughness of material of construction using heat treatment. IOP Conference Series: Earth and Environmental Science, 810(1), 012015. https://doi.org/10.1088/1755-1315/810/1/012015
   Google Scholar
• Chandra, H., & Lestari, V. (2021). Analysis of the effect of stop drilled hole diameter variation on fatigue resistance in medium carbon steel DIN HQ 705. IOP Conference Series: Earth and Environmental Science, 810(1), 012016. https://doi.org/10.1088/1755-1315/810/1/012016
   Google Scholar
• Chandra, H., Mataram, A., & Utami, N. (2019). The characterization of mechanical property and fatigue life of betel-falm fiber composite as environmentally-friendly material. IOP Conference Series: Materials Science and Engineering, 620(1), 012119. https://doi.org/10.1088/1757-899X/620/1/012119
   Google Scholar
• Chandra, H., Pratiwi, D. K., & Zahir, M. (2018). High-temperature quality of accelerated spheroidization on SUP9 leaf spring to enhance machinability. Heliyon, 4(12), e01076. https://doi.org/10.1016/j.heliyon.2018.e01076
   PubMedGoogle Scholar
• Chandra, H., Falisa, & Harnani. (2020). Geochemical studies of claystone based on analysis of scanning electron microscope (SEM), Talangsawah, Merapi District and surroundings of Lahat Regency, South Sumatra. Journal of Physics: Conference Series, 1500(1), 012079. https://doi.org/10.1088/1742-6596/1500/1/012079
   Google Scholar
• Chandra, H., Sianturi, B., & Nukman. (2019). Analysis of fatigue life and crack propagation characterization of gray cast iron under normalizing process. Journal of Physics: Conference Series, 1198(3), 032006. https://doi.org/10.1088/1742-6596/1198/3/032006
   Google Scholar
• Chandra, H. (2019). Mechanical fracture characterization of rice kernel under milling process. Journal of Physics: Conference Series, 1198(4), 042011. https://doi.org/10.1088/1742-6596/1198/4/042011
   Google Scholar
• Chen, C., Li, Z., Xu, C., Zhu, Z., & Zou, S. (2022). Variation of fracture toughness with biaxial load and T-stress under mode I condition. Applied Sciences, 12(18), 9319. https://doi.org/10.3390/app12189319
   Google Scholar
• Firdaus, M. S., Yani, I., Arifin, A., Arifta, P., Surya, I., & Nukman. (2019). The effect of heat treatment on fatigue testing of aluminum cans. Journal of Physics: Conference Series, 1198(7), 072002. https://doi.org/10.1088/1742-6596/1198/7/072002
   Google Scholar
• Frenelus, W., Peng, H., & Zhang, J. (2022). Creep behavior of rocks and its application to the long-term stability of deep rock tunnels. Applied Sciences, 12(17), 8451. https://doi.org/10.3390/app12178451
   Google Scholar
• Galeja, M., Hejna, A., Kosmela, P., & Kulawik, A. (2020). Static and dynamic mechanical properties of 3D printed ABS as a function of raster angle. Materials (Basel, Switzerland), 13(2), 297. https://doi.org/10.3390/ma13020297
   PubMed Web of Science ®Google Scholar
• Gan, J., Gao, Z., Wang, Y., Wang, Z., & Wu, W. (2021). Small–scale experimental investigation of fatigue performance improvement of ship hatch corner with shot peening treatments by considering residual stress relaxation. Journal of Marine Science and Engineering, 9(4), 419. https://doi.org/10.3390/jmse9040419
   Web of Science ®Google Scholar
• Halim, M., Chandra, H., Pratiwi, D. K., & Zahir, M. (2019). Sustainable development of lubricator to optimization process of lubrication in wire rope sling. Journal of Physics: Conference Series, 1198(4), 042005. https://doi.org/10.1088/1742-6596/1198/4/042005
   Google Scholar
• Handoko, W., Pahlevani, F., & Sahajwalla, V. (2018). Enhancing corrosion resistance and hardness properties of carbon steel through modification of microstructure. Materials (Basel, Switzerland), 11(12), 2404. https://doi.org/10.3390/ma11122404
   PubMed Web of Science ®Google Scholar
• Haunstetter, J., Krüger, M., & Zunft, S. (2020). Experimental studies on thermal performance and thermo-structural stability of steelmaking slag as inventory material for thermal energy storage. Applied Sciences, 10(3), 931. https://doi.org/10.3390/app10030931
   Google Scholar
• Hou, J. P., Wang, Q., Yang, H. J., Wu, X. M., Li, C. H., Zhang, Z. F., & Li, X. W. (2016). Fatigue and fracture behavior of a cold-drawn commercially pure aluminum wire. Materials (Basel, Switzerland), 9(9), 764. https://doi.org/10.3390/ma9090764
   PubMed Web of Science ®Google Scholar
• Houška, M., Silva, F. V. M., Buckow, R., Terefe, N. S., Tonello, C., & Evelyn. (2022) High pressure processing applications in plant foods. Foods (Basel, Switzerland), 11(2), 223. https://doi.org/10.3390/foods11020223
   PubMed Web of Science ®Google Scholar
• Kim, J., Kim, J., Kang, S., & Chun, K. (2020). Laser welding of ASTM A553-1 (9% nickel steel) (PART I: Penetration shape by bead on plate). Metals (Basel), 10(4), 484. https://doi.org/10.3390/met10040484
   Web of Science ®Google Scholar
• Kubit, A., Drabczyk, M., Trzepiecinski, T., Bochnowski, W., Kaščák, Ľ., & Slota, J. (2020). Fatigue life assessment of refill friction stir spot welded alclad 7075-T6 aluminium alloy joints. Metals (Basel), 10(5), 633. https://doi.org/10.3390/met10050633
   Web of Science ®Google Scholar
• Larrea-Wachtendorff, D., Del Grosso, V., & Ferrari, G. (2022). Evaluation of the physical stability of starch-based hydrogels produced by high-pressure processing (HPP). Gels (Basel, Switzerland), 8(3), 152. https://doi.org/10.3390/gels8030152
   PubMed Web of Science ®Google Scholar
• Lascano, D., Quiles-Carrillo, L., Balart, R., Boronat, T., & Montanes, N. (2019). Toughened poly(lactic acid)—PLA formulations by binary blends with poly(butylene succinate-co-adipate)—PBSA and their shape memory behaviour. Materials (Basel, Switzerland), 12(4), 622. https://doi.org/10.3390/ma12040622
   PubMed Web of Science ®Google Scholar
• Liang, J., Liu, L., Qin, Z., Zhao, X., Li, Z., Emmanuel, U., & Feng, J. (2023). Experimental study of curing temperature effect on mechanical performance of carbon fiber composites with application to filament winding pressure vessel design. Polymers, 15(4), 982. https://doi.org/10.3390/polym15040982
   PubMed Web of Science ®Google Scholar
• Lin, B., Alshammrei, S., Wigger, T., & Tong, J. (2019). Characterisation of fatigue crack tip field in the presence of significant plasticity. Theoretical and Applied Fracture Mechanics, 103, 102298. https://doi.org/10.1016/j.tafmec.2019.102298
   Web of Science ®Google Scholar
• Liu, D., & Pons, D. (2018). Crack propagation mechanisms for creep fatigue: A consolidated explanation of fundamental behaviours from initiation to failure. Metals (Basel), 8(8), 623. https://doi.org/10.3390/met8080623
   Web of Science ®Google Scholar
• Luo, Y., Gu, W., Peng, W., Jin, Q., Qin, Q., & Yi, C. (2020). A study on microstructure, residual stresses and stress corrosion cracking of repair welding on 304 stainless steel: Part I-effects of heat input. Materials (Basel, Switzerland), 13(10), 2416. https://doi.org/10.3390/ma13102416
   PubMed Web of Science ®Google Scholar
• Macek, W., Branco, R., Costa, J. D., & Trembacz, J. (2021). Fracture surface behavior of 34CrNiMo6 high-strength steel bars with blind holes under bending-torsion fatigue. Materials (Basel, Switzerland), 15(1), 80. https://doi.org/10.3390/ma15010080
   PubMed Web of Science ®Google Scholar
• Macek, W., Branco, R., Szala, M., Marciniak, Z., Ulewicz, R., Sczygiol, N., & Kardasz, P. (2020). Profile and areal surface parameters for fatigue fracture characterisation. Materials (Basel, Switzerland), 13(17), 3691. https://doi.org/10.3390/MA13173691
   PubMed Web of Science ®Google Scholar
• Niessen, B., Schumacher, E., Lueg-Althoff, J., Bellmann, J., Böhme, M., Böhm, S., Tekkaya, A. E., Beyer, E., Leyens, C., Wagner, M. F. X., & Groche, P. (2020). Interface formation during collision welding of aluminum. Metals (Basel), 10(9), 1202. https://doi.org/10.3390/met10091202
   Web of Science ®Google Scholar
• Nikulin, S. A., Rogachev, S. O., Belov, V. A., Zadorozhnyy, M. Y., Shplis, N. V., & Skripalenko, M. M. (2022). Effect of prolonged thermal exposure on low-cycle bending fatigue resistance of low-carbon steel. Metals (Basel), 12(2), 281. https://doi.org/10.3390/met12020281
   Web of Science ®Google Scholar
• Oliveira Anício Costa, I. M., Batková, M., Batko, I., Benabou, A., Mesplont, C., & Vogt, J. B. (2022). The influence of microstructure on the electromagnetic behavior of carbon steel wires. Crystals, 12(5), 576. https://doi.org/10.3390/cryst12050576
   Web of Science ®Google Scholar
• Pantazopoulos, G. (2019). A short review on fracture mechanisms of mechanical components operated under industrial process conditions: Fractographic analysis and selected prevention strategies. Metals (Basel), 9(2), 148. https://doi.org/10.3390/met9020148
   Web of Science ®Google Scholar
• Perez, M., Akhavan-Safar, A., Carbas, R. J. C., Marques, E. A. S., Wenig, S., & da Silva, L. F. M. (2022). Loading rate and temperature interaction effects on the mode I fracture response of a ductile polyurethane adhesive used in the automotive industry. Materials (Basel, Switzerland), 15(24), 8948. https://doi.org/10.3390/ma15248948
   PubMed Web of Science ®Google Scholar
• Pratiwi, D. K., Chandra, H., Utami, N. P. E., Irawan, O., & Purba, A. N. (2018). Damage analysis of moldboard plow. Amin M, editor. E3S Web of Conferences, 68, 04004. https://doi.org/10.1051/e3sconf/20186804004
   Google Scholar
• Pratiwi, D. K., Arifin, A., Mardhi, A., Gunawan, & Afriansyah. (2023). Investigation of welding parameters of dissimilar weld of SS316 and ASTM A36 joint using a grey-based taguchi optimization approach. Journal of Manufacturing and Materials Processing, 7(1), 39. https://doi.org/10.3390/jmmp7010039
   Google Scholar
• Preedawiphat, P., Mahayotsanun, N., Sa-Ngoen, K., Noipitak, M., Tuengsook, P., Sucharitpwatskul, S., & Dohda, K. (2020). Mechanical investigations of ASTM A36 welded steels with stainless steel cladding. Coatings, 10(9), 844. https://doi.org/10.3390/coatings10090844
   Web of Science ®Google Scholar
• Regassa, Y., Gari, J., & Lemu, H. G. (2022). Composite overwrapped pressure vessel design optimization using numerical method. Journal of Composites Science, 6(8), 229. https://doi.org/10.3390/jcs6080229
   Google Scholar
• Riyanto, H., Sugito, S., & Fikri, A. (2022). Optimization of wire type and current welding on the strength of welding connection in two types of material testing via response surface methodology. Engineering Solid Mechanics, 10(4), 341–350. https://doi.org/10.5267/j.esm.2022.6.004
   Google Scholar
• Rodríguez-Prieto, A., Callejas, M., Primera, E., Lomonaco, G., & Camacho, A. M. (2022). Multicriteria analytical model for mechanical integrity prognostics of reactor pressure vessels manufactured from forged and rolled steels. Mathematics, 10(10), 1779. https://doi.org/10.3390/math10101779
   Web of Science ®Google Scholar
• Rodríguez-Prieto, A., Camacho, A. M., Mendoza, C., Kickhofel, J., & Lomonaco, G. (2021). Evolution of standardized specifications on materials, manufacturing and in-service inspection of nuclear reactor vessels. Sustainability, 13(19), 10510. https://doi.org/10.3390/su131910510
   Web of Science ®Google Scholar
• Rodríguez-Prieto, A., Frigione, M., Kickhofel, J., & Camacho, A. M. (2021). Analysis of the technological evolution of materials requirements included in reactor pressure vessel manufacturing codes. Sustainability, 13(10), 5498. https://doi.org/10.3390/su13105498
   Web of Science ®Google Scholar
• Salakhov, I. I., Shaidullin, N. M., Chalykh, A. E., Matsko, M. A., Shapagin, A. V., Batyrshin, A. Z., Shandryuk, G. A., & Nifant’ev, I. E. (2021). Low-temperature mechanical properties of high-density and low-density polyethylene and their blends. Polymers, 13(11), 1821. https://doi.org/10.3390/polym13111821
   PubMed Web of Science ®Google Scholar
• Shi, Z., Li, J., Zhang, X., Shang, C., & Cao, W. (2022). Influence mechanisms of inclusion types on rotating bending fatigue properties of SAE52100 bearing steel. Materials (Basel, Switzerland), 15(14), 5037. https://doi.org/10.3390/ma15145037
   PubMed Web of Science ®Google Scholar
• Sun, F., Lv, L. T., Cheng, W., Zhang, J. L., Ba, D. C., Song, G. Q., & Lin, Z. (2021). Effect of loading angles and implant lengths on the static and fatigue fractures of dental implants. Materials (Basel, Switzerland), 14(19), 5542. https://doi.org/10.3390/ma14195542
   PubMed Web of Science ®Google Scholar
• Surojo, E., Gumilang, A. H., Triyono, T., Prabowo, A. R., Budiana, E. P., & Muhayat, N. (2021). Effect of water flow on underwater wet welded A36 steel. Metals (Basel), 11(5), 682. https://doi.org/10.3390/met11050682
   Web of Science ®Google Scholar
• Tamlicha, A., Farhan, A., Fadhilah, T. A., Firsa, T., Raja Ghazilla, R. A., Akhyar, Azwinur, & Syukran. (2022). Evaluation of welding distortion and hardness in the A36 steel plate joints using different cooling media. Sustainability, 14(3), 1405. https://doi.org/10.3390/su14031405
   Web of Science ®Google Scholar
• Utami, N. P. E., & Chandra, H. (2017). Mechanical properties analysis of Al-9Zn-5Cu-4Mg cast alloy by T5 heat treatment. Iskandar I, Ismadji S, Agustina. MATEC Web of Conferences, 101, 01009. https://doi.org/10.1051/matecconf/201710101009
   Google Scholar
• Vasudevan, A. K., & Sadananda, K. (2001). Analysis of fatigue crack growth under compression-compression loading. International Journal of Fatigue, 23, 365–374. https://doi.org/10.1016/s0142-1123(01)00172-4
   Web of Science ®Google Scholar
• Waqas, A., Qin, X., Xiong, J., Zheng, C., & Wang, H. (2019). Analysis of ductile fracture obtained by charpy impact test of a steel structure created by robot-assisted GMAW-based additive manufacturing. Metals (Basel), 9(11), 1208. https://doi.org/10.3390/met9111208
   Web of Science ®Google Scholar
• Weidner, A., Ranglack-Klemm, Y., Zienert, T., Aneziris, C. G., & Biermann, H. (2019). Mechanical high-temperature properties and damage behavior of coarse-grained alumina refractory metal composites. Materials (Basel, Switzerland), 12(23), 3927. https://doi.org/10.3390/ma12233927
   PubMed Web of Science ®Google Scholar
• Williams, J. C., & Boyer, R. R. (2020). Opportunities and issues in the application of titanium alloys for aerospace components. Metals (Basel), 10(6), 705. https://doi.org/10.3390/met10060705
   Web of Science ®Google Scholar
• Xiao, P., Li, D., Zhao, G., & Liu, M. (2021). Experimental and numerical analysis of mode I fracture process of rock by semi-circular bend specimen. Mathematics, 9(15), 1769. https://doi.org/10.3390/math9151769
   Web of Science ®Google Scholar
• Xing, Z., Wang, Z., Wang, H., & Shan, D. (2019). Bending fatigue behaviors analysis and fatigue life prediction of 20Cr2Ni4 gear steel with different stress concentrations near non-metallic inclusions. Materials (Basel, Switzerland), 12(20), 3443. https://doi.org/10.3390/ma12203443
   PubMed Web of Science ®Google Scholar
• Xu, Z., Cui, Y., Li, B., Liu, K., Shi, F., & Cao, P. (2022). Impact analysis of initial cracks’ angle on fatigue failure of flange shafts. Coatings, 12(2), 276. https://doi.org/10.3390/coatings12020276
   Web of Science ®Google Scholar
• Xue, F., He, D., & Zhou, H. (2022). Effect of ultrasonic vibration in friction stir welding of 2219 aluminum alloy: An effective model for predicting weld strength. Metals (Basel), 12(7), 1101. https://doi.org/10.3390/met12071101
   Web of Science ®Google Scholar
• Yang, D., Tang, S., Hu, Y., Nikitin, A., Wang, Q., Liu, Y., Li, L., He, C., Li, Y., Xu, B., & Wang, C. (2022). A novel model of ultrasonic fatigue test in pure bending. Materials (Basel, Switzerland), 15(14), 4864. https://doi.org/10.3390/ma15144864
   PubMed Web of Science ®Google Scholar
• Yang, Q., Xia, C., Deng, Y., Li, X., & Wang, H. (2019). Microstructure and mechanical properties of AlSi7Mg0.6 aluminum alloy fabricated by wire and arc additive manufacturing based on cold metal transfer (WAAM-CMT). Materials (Basel, Switzerland), 12(16), 2525. https://doi.org/10.3390/ma12162525
   PubMed Web of Science ®Google Scholar
• Yazdanpanah, A., Lago, M., Gennari, C., & Dabalà, M. (2021). Stress corrosion cracking probability of selective laser melted 316L austenitic stainless steel under the effect of grinding induced residual stresses. Metals (Basel), 11(2), 327. https://doi.org/10.3390/met11020327
   Web of Science ®Google Scholar
• Yuan, Q., Xu, G., Liu, S., Liu, M., Hu, H., & Li, G. (2018). Effect of rolling reduction on microstructure and property of ultrafine grained low-carbon steel processed by cryorolling martensite. Metals (Basel), 8(7), 518. https://doi.org/10.3390/met8070518
   Web of Science ®Google Scholar
• Yukawa, S. (1990). Guidelines for pressure vessel safety assessment. NIST special publication 780. National Institute of Standards and Technology
   Google Scholar
• Zhan, N., Hu, Z., & Zhang, X. (2020). Experimental investigation of fatigue crack growth behavior in banded structure of pipeline steel. Metals (Basel), 10(9), 1193. https://doi.org/10.3390/met10091193
   Web of Science ®Google Scholar
• Zhang, Y., Tang, Z., Zhao, L., Gong, B., Wang, G., & Li, Z. (2023). Effect of initial crack position on crack propagation behaviors of heavy-duty transmission gear. Materials (Basel, Switzerland), 16(17), 5961. https://doi.org/10.3390/ma16175961
   PubMed Web of Science ®Google Scholar
• Zidan, S., Silikas, N., Alhotan, A., Haider, J., & Yates, J. (2019). Investigating the mechanical properties of ZrO2-impregnated PMMA nanocomposite for denture-based applications. Materials (Basel, Switzerland), 12(8), 1344. https://doi.org/10.3390/ma12081344
   PubMed Web of Science ®Google Scholar
• Zienert, T., Endler, D., Hubálková, J., Günay, G., Weidner, A., Biermann, H., Kraft, B., Wagner, S., & Aneziris, C. G. (2021). Synthesis of niobium-alumina composite aggregates and their application in coarse-grained refractory ceramic-metal castables. Materials (Basel, Switzerland), 14(21), 6453. https://doi.org/10.3390/ma14216453
   PubMed Web of Science ®Google Scholar