Influence of process parameters on tribological behavior of Hemp powder reinforced epoxy composites

References

• Davim, J. P., & Cardoso, R. (2009). Effect of the reinforcement (carbon or glass fibres) on friction and wear behaviour of the PEEK against steel surface at long dry sliding. Wear, 266(7–8), 795–799. https://doi.org/10.1016/j.wear.2008.11.003
   Web of Science ®Google Scholar
• De Fazio, D., Boccarusso, L., & Durante, M. (2019). Tribological behaviour of hemp, glass and carbon fibre composites. Biotribology, 21, 100113. https://doi.org/10.1016/j.biotri.2019.100113
   Google Scholar
• Elfaleh, I., Abbassi, F., Habibi, M., Ahmad, F., Guedri, M., Nasri, M., & Garnier, C. (2023). A comprehensive review of natural fibers and their composites: An eco-friendly alternative to conventional materials. Results Engineering, 19, 101271. https://doi.org/10.1016/j.rineng.2023.101271
   Google Scholar
• Gholampour, A., & Ozbakkaloglu, T. (2020). A review of natural fiber composites: Properties, modification and processing techniques, characterization, applications (Vol. 55). Springer US.
   Google Scholar
• Gupta, A. (2022). Influence of filler content on tribological behavior of cenopshere flyash filled bamboo fiber reinforced composites. Journal of Natural Fibers, 19(15), 12051–12067. https://doi.org/10.1080/15440478.2022.2051666
   Web of Science ®Google Scholar
• Ighalo, J. O., Adeyanju, C. A., Ogunniyi, S., Adeniyi, A. G., & Abdulkareem, S. A. (2021). An empirical review of the recent advances in treatment of natural fibers for reinforced plastic composites. Composite Interfaces. 28(9), 925–960. https://doi.org/10.1080/09276440.2020.1826274
   Web of Science ®Google Scholar
• Inbakumar, J. P., & Ramesh, S. (2018). Mechanical, wear and thermal behaviour of hemp fibre/egg shell particle reinforced epoxy resin bio composite. Transactions of the Canadian Society for Mechanical Engineering, 42(3), 280–285. https://doi.org/10.1139/tcsme-2017-0079
   Web of Science ®Google Scholar
• Keerthiveettil Ramakrishnan, S., Vijayananth, K., Pudhupalayam Muthukutti, G., Spatenka, P., Arivendan, A., & Ganesan, S. P. (2022). The effect of various composite and operating parameters in wear properties of epoxy-based natural fiber composites. Journal of Material Cycles and Waste Management, 24(2), 667–679. https://doi.org/10.1007/s10163-022-01357-1
   Web of Science ®Google Scholar
• Khan, M. M., Dey, A., & Hajam, M. I. (2022). Experimental investigation and optimization of dry sliding wear test parameters of aluminum based composites. Silicon, 14(8), 4009–4026. https://doi.org/10.1007/s12633-021-01158-5
   Web of Science ®Google Scholar
• Krishnaiah, P., Ratnam, C. T., & Manickam, S. (2017). Enhancements in crystallinity, thermal stability, tensile modulus and strength of sisal fibres and their PP composites induced by the synergistic effects of alkali and high intensity ultrasound (HIU) treatments. Ultrasonics Sonochemistry, 34, 729–742. https://doi.org/10.1016/j.ultsonch.2016.07.008
   PubMed Web of Science ®Google Scholar
• Krishnasamy, P., Rajamurugan, G., Aravindraj, S., & Sudhagar, P. E. (2022). Vibration and wear characteristics of aloevera/flax/hemp woven fiber epoxy composite reinforced with wire mesh and BaSO4. Journal of Natural Fibers, 19(8), 2885–2901. https://doi.org/10.1080/15440478.2020.1835782
   Web of Science ®Google Scholar
• Kumar, S., Mer, K. K. S., Gangil, B., & Patel, V. K. (2019). Synergy of rice-husk filler on physico-mechanical and tribological properties of hybrid Bauhinia-vahlii/sisal fiber reinforced epoxy composites. Journal of Materials Research and Technology, 8(2), 2070–2082. https://doi.org/10.1016/j.jmrt.2018.12.021
   Google Scholar
• Kumar, S., Patel, V. K., Mer, K. K. S., Gangil, B., Singh, T., & Fekete, G. (2021). Himalayan natural fiber-reinforced epoxy composites: Effect of grewia optiva/bauhinia vahlii fibers on ohysico-mechanical and dry sliding wear behavior. Journal of Natural Fibers, 18(2), 192–202. https://doi.org/10.1080/15440478.2019.1612814
   Web of Science ®Google Scholar
• Mahesha, G. T., Satish Shenoy, B., Vijaya Kini, M., & Padmaraj, N. H. (2018). Wear behaviour studies on Grewia Serrulata bast fibre reinforced polymer composites. Cogent Engineering, 5(1). article no 1517580. https://doi.org/10.1080/23311916.2018.1517580
   PubMedGoogle Scholar
• Maiti, S., Islam, M. R., Uddin, M. A., Afroj, S., Eichhorn, S. J., & Karim, N. (2022). Sustainable fiber-reinforced composites: A review. Advanced Sustainable Systems, 6(11), 2200258.
   Web of Science ®Google Scholar
• Moonart, U., & Utara, S. (2019). Effect of surface treatments and filler loading on the properties of hemp fiber/natural rubber composites. Cellulose, 26(12), 7271–7295. https://doi.org/10.1007/s10570-019-02611-w
   Web of Science ®Google Scholar
• Moussaoui, N., Rokbi, M., Osmani, H., Jawaid, M., Atiqah, A., Asim, M., & Benhamadouche, L. (2021). Extraction and characterization of fiber treatment inula viscosa fibers as potential polymer composite reinforcement. Journal of Polymers and the Environment, 29(11), 3779–3793. https://doi.org/10.1007/s10924-021-02147-w
   Web of Science ®Google Scholar
• Omrani, E., Menezes, P. L., & Rohatgi, P. K. (2016). State of the art on tribological behavior of polymer matrix composites reinforced with natural fibers in the green materials world. Engineering Science and Technology, an International Journal, 19(2), 717–736. https://doi.org/10.1016/j.jestch.2015.10.007
   Google Scholar
• Padmaraj, N. H., Vijaya, K. M., & Dayananda, P. (2020). Experimental study on the tension-tension fatigue behaviour of glass/epoxy quasi-isotropic composites. Journal of King Saud University - Engineering Sciences, 32(6), 396–401. https://doi.org/10.1016/j.jksues.2019.04.007
   Google Scholar
• Padmaraj, N.H., Vijaya, K. M., Amritha, U., Dayananda, P., & Shreepannaga. (2021). Slurry erosion behaviour of carbon/epoxy quasi-isotropic laminates based on Taguchi’s optimization method. Engineering Failure Analysis, 123, 105274. https://doi.org/10.1016/j.engfailanal.2021.105274
   Web of Science ®Google Scholar
• Pereira, P. H. F., Ornaghi, H. L., Arantes, V., & Cioffi, M. O. H. (2021). Effect of chemical treatment of pineapple crown fiber in the production, chemical composition, crystalline structure, thermal stability and thermal degradation kinetic properties of cellulosic materials. Carbohydrate Research, 499, 108227. https://doi.org/10.1016/j.carres.2020.108227
   PubMed Web of Science ®Google Scholar
• Reddy, P. V., Reddy, R. V. S., Rajendra Prasad, P., Mohana Krishnudu, D., Reddy, R. M., & Rao, H. R. (2022). Evaluation of mechanical and wear performances of natural fiber reinforced epoxy composites. Journal of Natural Fibers, 19(6), 2218–2231. https://doi.org/10.1080/15440478.2020.1807441
   Web of Science ®Google Scholar
• Sahu, P., & Gupta, M. K. (2020). A review on the properties of natural fibres and its bio-composites: Effect of alkali treatment. The Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 234(1), 198–217. https://doi.org/10.1177/1464420719875163
   Web of Science ®Google Scholar
• Sampathkumaran, P., Seetharamu, S., Vynatheya, S., Murali, A., Kumar, R. K., & Kishore. (2000). SEM observations of the effects of velocity and load on the sliding wear characteristics of glass fabric-epoxy composites with different fillers. Wear, 237(1), 20–27. https://doi.org/10.1016/S0043-1648(99)00300-2
   Web of Science ®Google Scholar
• Saravanakumaar, A., Senthilkumar, A., & Rajan, B. M. C. (2021). Effect of fillers on natural fiber-polymer composite: An overview of physical and mechanical properties. Mechanical and dynamic properties of biocomposites (pp. 207–233). Wiley.
   Google Scholar
• Shahzad, A. (2012). Hemp fiber and its composites - A review. Journal of Composite Materials. 46(8), 973–986. https://doi.org/10.1177/0021998311413623
   Web of Science ®Google Scholar
• Shivamurthy, B., Siddaramaiah., & Prabhuswamyc, M. S. (2009). Influence of SiO2 fillers on sliding wear resistance and mechanical properties of compression moulded glass epoxy composites. Journal of Minerals and Materials Characterization and Engineering, 08(07), 513–530. https://doi.org/10.4236/jmmce.2009.87045
   Google Scholar
• Sukur, E. F., Kaybal, H. B., Ulus, H., & Avci, A. (2021). Tribological behavior of epoxy nanocomposites under corrosive environment: Effect of high-performance boron nitride nanoplatelet. Sigma Journal of Engineering and Natural Sciences, 41(2), 385–395.
   Google Scholar
• Sumesh, K. R., Kavimani, V., Rajeshkumar, G., Ravikumar, P., & Indran, S. (2022). An investigation into the mechanical and wear characteristics of hybrid composites: Influence of different types and content of biodegradable reinforcements. Journal of Natural Fibers, 19(8), 2823–2835. https://doi.org/10.1080/15440478.2020.1821297
   Web of Science ®Google Scholar
• Suthan, R., Jayakumar, V., & Bharathiraja, G. (2020). Wear analysis of bio-fillers reinforced epoxy composites. Materials Today: Proceedings, 22, 793–798. https://doi.org/10.1016/j.matpr.2019.10.154
   Google Scholar
• Vassilopoulos, A. P. (2019). The history of fiber-reinforced polymer composite laminate fatigue. International Journal of Fatigue, 134, 105512. https://doi.org/10.1016/j.ijfatigue.2020.105512
   Web of Science ®Google Scholar
• Vigneshwaran, S., Sundarakannan, R., John, K. M., Joel Johnson, R. D., Prasath, K. A., Ajith, S., Arumugaprabu, V., & Uthayakumar, M. (2020). Recent advancement in the natural fiber polymer composites: A comprehensive review. Journal of Cleaner Production, 277, 124109. https://doi.org/10.1016/j.jclepro.2020.124109
   Web of Science ®Google Scholar
• Wang, X., Tang, F., Cao, Q., Qi, X., Pan, H., Lin, Z., & Battocchi, D. (2020). Nano-modified functional composite coatings for metallic structures: Part II—Mechanical and damage tolerance. Surface and Coatings Technology, 401, 126274. https://doi.org/10.1016/j.surfcoat.2020.126274
   Web of Science ®Google Scholar