Tension control algorithms used in electrical wire manufacturing processes: a systematic review

References

• Abdul-Kareem, F. H., & Alyaa, S. H. (2015). Three-dimensional finite element analysis of wire drawing process. Universal Journal of Mechanical Engineering, 3(3), 71–82.
   Google Scholar
• Abjadi, N. R., Soltani, J., Askari, J., & Markadeh, G. R. A. (2009). Nonlinear sliding-mode control of a multi-motor web-winding system without tension sensor. IET Control Theory & Applications, 3(4), 419–427. https://doi.org/10.1049/iet-cta.2008.0118
   Web of Science ®Google Scholar
• Albadr, M. A., Tiun, S., Ayob, M., & Al-Dhief, F. (2020). Genetic algorithm based on natural selection theory for optimization problems. Symmetry (Basel), 12(11), 1758. https://doi.org/10.3390/sym12111758
   Google Scholar
• Amimeur, H., Aouzellag, D., Abdessemed, R., & Ghedamsi, K. (2012). Sliding mode control of a dual-stator induction generator for wind energy conversion systems. International Journal of Electrical Power & Energy Systems, 42(1), 60–70. https://doi.org/10.1016/j.ijepes.2012.03.024
   Web of Science ®Google Scholar
• Armghan, H., Yang, M., Armghan, A., Ali, N., Wang, M. Q., & Ahmad, I. (2020). Design of integral terminal sliding mode controller for the hybrid AC/DC microgrids involving renewables and energy storage systems. International Journal of Electrical Power & Energy Systems, 119, 105857. https://doi.org/10.1016/j.ijepes.2020.105857
   Web of Science ®Google Scholar
• Baumgart, M. D., & Pao, L. Y. (2007). Robust control of nonlinear tape transport systems with and without tension sensors. Journal of Dynamic Systems, Measurement, and Control, 129(1), 41–55. https://doi.org/10.1115/1.2397151
   Web of Science ®Google Scholar
• Becerra, V. M. (2008). Optimal control. Scholarpedia, 3(1), 5354. https://doi.org/10.4249/scholarpedia.5354
   Google Scholar
• Behrooz, F., Mariun, N., Marhaban, M. H., Radzi, M. A. M., & Ramli, A. R. (2018). Review of control techniques for HVAC systems-nonlinearity approaches based on fuzzy cognitive maps. Energies, 11(3), 495. https://doi.org/10.3390/en11030495
   Web of Science ®Google Scholar
• Benlatreche, A., Knittel, D., & Ostertag, E. (2005). State feedback controllers synthesis using BMI optimization for large scale web handling systems. In 16th IFAC World Congress (Vol. 38, pp. 27–32). https://doi.org/10.3182/20050703-6-CZ-1902.01545
   Google Scholar
• Benlatreche, A., Knittel, D., & Ostertag, E. (2006). Robust decentralized control strategies for large scale web handling systems. Control Engineering Practice. 16(6), 736–750. https://doi.org/10.1016/j.conengprac.2006.03.003
   Web of Science ®Google Scholar
• Bi, C. (2010). Deterministic local alignment methods improved by a simple genetic algorithm. Neurocomputing, 73(13–15), 2394–2406. https://doi.org/10.1016/j.neucom.2010.01.023
   Web of Science ®Google Scholar
• Camacho, E. F., & Bordons, C. (2007). Model predictive control (2nd ed.). Springer.
   Google Scholar
• Candanedo, J. A., & Athienitis, A. K. (2011). Predictive control of radiant floor heating and solar-source heat pump operation in a solar house. HVAC&R Research, 17(3), 235–256. https://doi.org/10.1080/10789669.2011.568319
   Web of Science ®Google Scholar
• Carrasco, R., & Valenzuela, M. A. (2006). Tension control of a two-drum winder using paper tension estimation. IEEE Transactions on Industry Applications, 42(2), 618–628. https://doi.org/10.1109/TIA.2005.863912
   Web of Science ®Google Scholar
• Cazac, V., & Nuca, I. (2015). Adjusting of the control system of asynchronous motor drive for wire drawing machine and winding mechanism. In Proceedings of the 10th International Conference on Electromechanical and Power Systems, pp. 286–291.
   Google Scholar
• Cazac, V., Nuca, I., & Todos, P. (2016). AC drive control system of the wire drawing machine with DTC control and fuzzy controller. In Proceedings of the 13th International Conference on Development and Application Systems, pp. 126–129.
   Google Scholar
• Chang, W. L., Lee, J. W., Kim, H. J., & Shin, K. H. (2008). A feed-forward tension control in drying section of roll-to-roll e-printing systems. In Proceedings of the 17th World Congress: The International Federation of Automatic Control, pp. 11865–11870. https://doi.org/10.3182/20080706-5-KR-1001.02009
   Google Scholar
• Cheng, C. W., Hsiao, C. H., Chuang, C. C., Chen, K. C., & Tseng, W. P. (2005). Observer-based tension feedback control of direct drive web transport system. In IEEE International Conference on Mechatronics, pp. 745–750.
   Google Scholar
• Chieh-Li, C., Kuo-Ming, C., & Chih-Ming, C. (2004). Modelling and control of a web-fed machine. Applied Mathematical Modelling, 28, 863–876.
   Web of Science ®Google Scholar
• Chu, X., Nian, X., & Fu, X. (2020). Tension control of web winding systems for speed-up phase. In Proceedings of the 39th Chinese Control Conference, pp. 1756–1761.
   Google Scholar
• Chu, X., Nian, X., Sun, M., Wang, H., & Xiong, H. (2018). Robust observer design for multi-motor web-winding system. The Journal of the Franklin Institute, 355(12), 5217–5239. https://doi.org/10.1016/j.jfranklin.2018.05.002
   Web of Science ®Google Scholar
• Claveau, F., Chevrel, P., & Knittel, D. (2005). A two degrees of freedom h∞ controller design methodology for multi-motors web handling system. In Proceedings of the 2005 American Control Conference, pp. 1383–1388.
   Google Scholar
• Claveau, P. F., Chevrel, P., & Knittel, K. (2008). A 2DOF gain-scheduled controller design methology for a multi-motor web transport system. Control Engineering Practice. 16, 09–22.
   Web of Science ®Google Scholar
• Damour, J. (2013). The mechanics of tension control. Converter Accessory Corporation Wind Gap.
   Google Scholar
• Doghmane, M. Z., Kidouche, M., Habbi, H., & Lamrao, W. (2015). A new decomposition strategy approach applied for web winding system control optimization. In 3rd International Conference on Control, Engineering and Information Technology, pp. 1–6.
   Google Scholar
• Dou, X., & Wang, W. (2010). Robust control of multistage printing systems. Control Engineering Practice. 18(3), 219–229. https://doi.org/10.1016/j.conengprac.2009.09.012
   Web of Science ®Google Scholar
• Doyle, B., Glover, J., Khargonekar, K., & Francis, P. (1989). State-space solutions to standard H2/and H infinity. IEEE Transactions on Automatic Control, 34(8), 831–847. https://doi.org/10.1109/9.29425
   Web of Science ®Google Scholar
• Duarte-Galvan, C., Torres-Pacheco, I., Guevara-Gonzalez, R. G., Romero-Troncoso, R. J., Contreras-Medina, L. M., Rios-Alcaraz, M. A., & Millan-Almaraz, J. R. (2012). Review. Advantages and disadvantages of control theories applied in greenhouse climate control systems. Spanish Journal of Agricultural Research, 10(4), 926–938. https://doi.org/10.5424/sjar/2012104-487-11
   Web of Science ®Google Scholar
• Duc, D. N., Thi, L. T., & Nguyen, T. L. (2020). Imperfect roll arrangement compensation control based on neural network for web handling systems. Engineering, Technology & Applied Science Research, 10(3), 5694–5699. https://doi.org/10.48084/etasr.3530
   Web of Science ®Google Scholar
• Duong, V. T., Kim, D. H., Kim, H. K., & Kim, S. B. (2015). Development of an active wire tension system for improving the performance of brushless direct current coil winding machine. International Journal of Advanced Mechatronic Systems, 6(5), 201–210. https://doi.org/10.1504/IJAMECHS.2015.072817
   Google Scholar
• Dwivedula, R. V., Zhu, Y., & Pagilla, P. R. (2006). Characteristics of active and passive dancers: a comparative study. Control Engineering Practice. 14(4), 409–423. https://doi.org/10.1016/j.conengprac.2005.02.003
   Web of Science ®Google Scholar
• Dzib, J. T., Moo1, E. J. A., Bassam, A., Flota-Ba, M., Soberanis, M. A. E., Ricalde, L. J., & L’opez-Sanchez, M. J. (2016). Photovoltaic module temperature estimation: A comparison between artificial neural networks and adaptive neuro fuzzy inference systems models. In International Symposium on Intelligent Computing Systems (Vol. 10, pp. 46–60).
   Google Scholar
• Eum, S., Lee, J., & Nam, K. (2016). Robust tension control of roll-to-roll winding equipment based on a disturbance observer. In 42nd Annual Conference of the IEEE Industrial Electronics Society, pp. 625–630.
   Google Scholar
• Fadhel S, S., & Noaman, S. F. (2017). The generalized backstepping control method for stabilizing and solving systems of multiple delay differential equations. In 1st Scientific International Conference, College of Science, Al-Nahrain University, pp 150–156. https://doi.org/10.22401/ANJS.00.1.20
   Google Scholar
• Ganeshthangaraj, P., Muhammad, Z., Yang-Hoi, D., & Kyung-Hyun, C. (2012). Fuzzy logic-based control design for active dancer closed loop web tension control. International Journal of Applied Engineering Research and Application, 2(3), 438–443.
   Google Scholar
• Gang, W. (2020). ESO-based terminal sliding mode control for uncertain full-car active suspension systems. International Journal of Automotive Technology, 21(3), 691–702. https://doi.org/10.1007/s12239-020-0067-y
   Web of Science ®Google Scholar
• Gassmann, V., & Knittel, D. (2007). Tension observers in elastic web unwinder-winder systems [Paper presentation]. Proceedings of ASME International Mechanical Engineering Congress and Exposition, p. 9. https://doi.org/10.1115/IMECE2007-42249
   Google Scholar
• Gassmann, V., Knittel, D., Pagilla, P. R., & Bueno, M. A. (2009). H∞ unwinding web tension control of a strip processing plant using a pendulum dancer. In American Control Conference, pp. 901–906.
   Google Scholar
• Gassmann, V., Knittel, D., Pagilla, P., & Bueno, M. (2012). A fixed-order h∞ tension control in the unwinding section of a web handling system using a pendulum dancer. IEEE Transactions on Control Systems Technology, 20(1), 173–180.
   Web of Science ®Google Scholar
• Gerngrob, M., Kohler, M., Endisch, C., & Kennel, R. (2020). Model-Based Control of Nonlinear Wire Tension in Dynamic Needle Winding Processes. In Proceedings of the 2020 IEEE International Conference on Industrial Technology, pp. 281–238.
   Google Scholar
• Giannoccaro, N. I., Manieri, G., Martina, P., & Sakamoto, T. (2018). Genetic algorithm for decentralized PI controller tuning of a multi-span web transport system based on overlapping decomposition. In 2017 11th Asian Control Conference (ASCC), pp. 993–998.
   Google Scholar
• Giannoccaro, N. I., Sakamoto, T., & Uchitomi, I. (2016). A gain scheduling of PI controllers of a multispan web transport system. International Journal on Smart Sensing and Intelligent Systems, 9(3), 1516–1533. https://doi.org/10.21307/ijssis-2017-928
   Google Scholar
• Gruber, P., & Balemi, S. (2010). Overview of non-linear control methods. Swiss Society for Automatic Control.
   Google Scholar
• Hailiang, H., Xiaohong, N., Shaozhang, X., Miaoping, S., & Hongyun, X. (2016). Robust decentralized control for large-scale web-winding systems: a linear matrix inequality approach. Transactions of the Institute of Measurement and Control, 39(7), 953–964.
   Web of Science ®Google Scholar
• Hailiang, H., Zhong, W., Xiaohong, N., & Jing, S. (2015). Robust decentralized control of web-winding systems without tension sensor. In Proceedings of the 34th Chinese Control Conference, pp. 8850–8854.
   Google Scholar
• Han, J. (1998). Active disturbance rejection controller and its applications. Control and Decision, 13(1), 19–23.
   Google Scholar
• Hanafi, N. O. S., Shin-Horng, C., Wai-Keat, H., Wen-Yee, C., Riduwan, M., & Nawawi, M. (2015). Investigation of model parameter variation for tension control of a multi motor wire winding system. In Proceedings of the 10th Asian Control Conference, pp. 1704–1709.
   Google Scholar
• Haripriya, N., Kavitha, P., Muthukumar, N., Srinivasan, S., & Ramkumar, K. (2016). Design of PSO-based PI controller for tension control in web transport systems. Advances in Intelligent Systems and Computing, 398, 509–516.
   Google Scholar
• Haripriya, N., Kavitha, P., Srinivasan, S., & Belikov, J. (2019). Evolutionary optimization-based fractional order controller for web transport systems in process industries. International Journal of Advanced Intelligence Paradigms, 12(3–4), 317–330. https://doi.org/10.1504/IJAIP.2019.098567
   Google Scholar
• Harkegard, O. (2011). Flight control design using backstepping. Department of Electrical Engineering, Linköping University.
   Google Scholar
• He, F., Wang, S., & Wang, C. (2018). Inhibition of tension vibration for winding tension control system. In 37th Chinese Control Conference (CCC).
   Google Scholar
• Hongji, Z., Tang, H., & Shi, Y. (2018). Precision tension control technology of composite fiber tape winding molding. Journal of Thermoplastic Composite Materials, 31(7), 925–945. https://doi.org/10.1177/0892705717729018
   Web of Science ®Google Scholar
• Hongliang, K., Fenglong, K., Nan, C., Qiaoshi, M., Xin, W., Dongwei, Z., Nang, Q., & Bin, W. (2016). Parameters turning of ADRC based on neural network. In International Conference of Education, Management, Computer and Society, pp. 767–769.
   Google Scholar
• Höschel, K., & Lakshminarayanan, V. (2019). Genetic algorithms for lens design: A review. Journal of Optics, 48(1), 134–144. https://doi.org/10.1007/s12596-018-0497-3
   Web of Science ®Google Scholar
• Hou, H., Nian, X., Chen, J., & Xiao, D. (2018). Decentralized coordinated control of elastic web winding systems without tension sensor. ISA Transactions, 80, 350–359. https://doi.org/10.1016/j.isatra.2018.06.006
   PubMed Web of Science ®Google Scholar
• Hou, Y. (2001). Novel control approaches for web tension regulation. Cleveland State University.
   Google Scholar
• Huang, H., Xu, J., Sun, K., Deng, L., & Huang, C. (2020). Design and analysis of tension control system for transformer insulation layer winding. IEEE Access, 8, 1–1. https://doi.org/10.1109/ACCESS.2020.2995591
   Web of Science ®Google Scholar
• Huang, H., Zhao, X., & Zhang, X. (2022). Review article intelligent guidance and control methods for Missile Swarm. Computational Intelligence and Neuroscience, 2022, 8235148. https://doi.org/10.1155/2022/8235148
   PubMed Web of Science ®Google Scholar
• Huang, P. Y., Cheng, M. Y., Su, K. H., & Kuo, W. L. (2021). Control of roll-to-roll manufacturing based on sensorless tension estimation and disturbance compensation. Journal of the Chinese Institute of Engineers, 44(2), 89–103. https://doi.org/10.1080/02533839.2020.1856724
   Web of Science ®Google Scholar
• Hwang, H., Lee, J., Sangjune, E., & Kanghyun, N. (2019). Kalman-filter-based tension control design for industrial roll-to-roll system. Algorithms, 12(4), 86. https://doi.org/10.3390/a12040086
   Web of Science ®Google Scholar
• Hyunkyoo, K., & Kee-Hyun, S. (2018). Precise tension control of a dancer with a reduced-order observer for roll-to-roll manufacturing systems. Mechanism and Machine Theory, 122, 75–85.
   Web of Science ®Google Scholar
• Hyun-Kyoo, K., Chang-Woo, L., Kee-Hyun, S., & Sang-Chu, K. (2011). Modelling and matching design of a tension controller using pendulum dancer in roll-to-roll systems. IEEE Transactions on Industry Applications, 47(4), 1558–1566.
   Web of Science ®Google Scholar
• Idrissi, M., Salami, M., & Annaz, F. (2022). A review of quadrotor unmanned aerial vehicles: applications, architectural design and control algorithms. Journal of Intelligent & Robotic Systems, 104(2), 33. https://doi.org/10.1007/s10846-021-01527-7
   Web of Science ®Google Scholar
• Imamura, T., Kuroiwa, T., Mitsui, N., Terashima, K., & Takemoto, H. (2003). Development of hoop filament winding system with tension control. Transactions of the Japan Society of Mechanical Engineers Series C, 69(680), 906–913. https://doi.org/10.1299/kikaic.69.906
   Google Scholar
• Iqbal, J., Ullah, M., Ghani, S., Khelifa, B., & Cukovic, S. (2017). Nonlinear control systems- a brief overview of historical and recent advances. Nonlinear Engineering, 6(4), 301–312.
   Google Scholar
• Jafar, A., Fasih-Ur-Rehman, S., Fazal-Ur-Rehman, S., Ahmed, N., & Shehzad, M. (2016). A robust H∞ control for unmanned aerial vehicle against atmospheric turbulence [Paper presentation]. 2nd International Conference on Robotics and Artificial Intelligence.
   Google Scholar
• Jeetae, K. (2006). Development of hardware simulator and controller for web transport process. Journal of Manufacturing Science and Engineering, 128(1), 378–381.
   Web of Science ®Google Scholar
• Jian, L., Xuesong, M., Tao, T., & Shanhui, L. (2011). Design tension controller of unwinding system based on BP neural network. Advanced Science Letters, 4(6), 2222–2226. https://doi.org/10.1166/asl.2011.1580
   Google Scholar
• Jie-Shiou, L., Ming-Yang, C., Ke-Han, S., & Mi-Chi, T. (2018). Wire tension control of an automatic motor winding machine—An iterative learning sliding mode control approach. Robotics and Computer-Integrated Manufacturing, 50, 50–62.
   Web of Science ®Google Scholar
• Jinbao, H., Yongyi, H., Guo, S., & Fang, M. (2009). Tension robust control strategy based on self-optimizing algorithm. WSEAS Transactions on. Systems and Control, 4(3), 151–161.
   Google Scholar
• Jorg, H., & Brunner, T. (2008). History, present situation and future trends in ensuring constant and consistent wire tension in stranding machines. Wire Journal International, 43(3), 146–151.
   Google Scholar
• Kang, H., & Kee-Hyun, S. (2018). Precise tension control of a dancer with a reduced-order observer for roll-to-roll manufacturing system. Mechanism and Machine Theory, 122, 75–85.
   Google Scholar
• Kang, C. G., & Lee, B. J. (2008). “MIMO tension modelling and control for roll-to-roll converting machines.” In Proceedings of the 17th World Congress the International Federation of Automatic Control, pp. 11877–11882. https://doi.org/10.3182/20080706-5-KR-1001.02011
   Google Scholar
• Kang, H., Lee, C., Shin, K. H., & Kim, S. C. (2011). Modeling and matching design of a tension controller using pendulum dancer in roll-to-roll systems. IEEE Transactions on Industry Application, 47, 1558–1566.
   Google Scholar
• Kasper, L. (2010). Fatigue properties of heavily drawn steel wires. Katholieke Universiteit Leuven, Arenberg.
   Google Scholar
• Knittel, D., Arbogast, A., Vedrines, M., & Pagilla, P. (2006). Decentralized robust control strategies with model-based feedforward for elastic web winding system. In American Control Conference, pp. 68–75.
   Google Scholar
• Knittel, D., Laroche, E., Gigan, D., & Koc, H. (2003). Tension control for winding systems with two degrees-of-freedom h∞ controllers. IEEE Transactions on Industry Applications, 39(1), 113–120. https://doi.org/10.1109/TIA.2002.807231
   Web of Science ®Google Scholar
• Koc, H., Knittel, D., de Mathelin, M., & Abba, G. (2002). Modeling and robust control of winding system for elastic webs. IEEE Transactions on Control Systems Technology, 10(2), 197–208. https://doi.org/10.1109/87.987065
   Web of Science ®Google Scholar
• Koc, H., Knittel, D., Mathelin, M. D., & Abba, G. (2000). Robust gain-scheduled control of winding systems. In Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No. 00CH37187) (Vol. 4, pp. 4116–4119). IEEE.
   Google Scholar
• Kravaris, C., Hahn, J., & Chu, Y. (2012). Advances and selected recent developments in state and parameter estimation. Computers & Chemical Engineering, 51, 111–123. https://doi.org/10.1016/j.compchemeng.2012.06.001
   Web of Science ®Google Scholar
• Kumar, V. E., Jovitha, J., & Ayyappan, S. (2013). Comparison of four state observer design algorithms for MIMO system. Archives of Control Sciences, 23(2), 131–144.
   Google Scholar
• Kuo-Ming, C., & Yen-Yeu, L. (2013). Robust sliding mode control for a roll-to-roll machine. In Proceedings of the 10th International Conference on Informatics in Control, Automation and Robotics, pp. 405–409.
   Google Scholar
• Kuppuswamy, S. (2004). Comparison of active and passive dancers for periodic tension disturbance attenuation in web processing lines. Oklahoma State University.
   Google Scholar
• Kyung-Hyun, C., Tran, T. T., & Dong-Soo, K. (2011). Back-stepping controller-based web tension control for roll-to-roll web printed electronics system. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 5(1), 7–21. https://doi.org/10.1299/jamdsm.5.7
   Web of Science ®Google Scholar
• Tseng, L. W. Hu, T. S., & Hu, Y. C. (2021). A Smart tool holder calibrated by machine learning for measuring cutting force in fine turning and its application to the specific cutting force of low carbon steel S15C. Machines, 9, 190. https://doi.org/10.3390/machines9090190
   Web of Science ®Google Scholar
• Larsen, J. S., & Jenson, P. K. (2007). Adaptive control with self-tuning for center driven web winders [MSc thesis, Aalborg University].
   Google Scholar
• Larsson, J., Jansson, A., & Karlsson, P. (2018). Monitoring and evaluation of the wire drawing process using thermal imaging. International Journal of Advanced Manufacturing Technology, 3, 14.
   Google Scholar
• Layadi, N., Djerioui, A., Zeghlache, S., Houari, A., Benkhoris, M. F., & Berrabah, F. (2017). Comparative study between sliding mode control and backstepping control for double star induction machine (DSIM) under current sensor faults. International Journal of Information Technology and Electrical Engineering, 6(6), 67–77.
   Google Scholar
• Lee, C., Lee, J., Kang, H., & Shin, K. (2009). A study on the tension estimator by using register error in a printing section of roll to roll e-printing systems. Journal of Mechanical Science and Technology, 23(1), 212–220. https://doi.org/10.1007/s12206-008-0927-2
   Web of Science ®Google Scholar
• Li, Q., Bai, J., Fan, Y., & Zhang, Z. (2016). Study of wire tension control system based on closed loop PID control in HS-WEDM. The International Journal of Advanced Manufacturing Technology, 82(5–8), 1089–1097. https://doi.org/10.1007/s00170-015-7412-8
   Web of Science ®Google Scholar
• Li, X., Zhu, Z., Shen, G., & Tang, Y. (2021). Wire tension coordination control of electro-hydraulic servo driven double-rope winding hoisting systems using a hybrid controller combining the flatness-based control and a disturbance observer. Symmetry (Basel), 13(4), 716. https://doi.org/10.3390/sym13040716
   Google Scholar
• Li, Z. (2015). Tension control system design of a filament winding structure based on fuzzy neural network. Engineering Review, 35(1), 9–17.
   Google Scholar
• Lin, K. C. (2003). Observer-based tension feedback control with friction and inertia compensation. IEEE Transactions on Control Systems Technology, 11(1), 109–118.
   Web of Science ®Google Scholar
• Liu, Y., Fang, Q., & Yinglin, K. (2020). Modeling of tension control system with passive dancer roll for automated fiber placement. Mathematical Problems in Engineering, 2020, 1–11.
   Web of Science ®Google Scholar
• Lu, Y., & Pagilla, P. R. (2014 “Adaptive control of web tension in a heat transfer section of a roll-to-roll manufacturing process line,” In American Control Conference, pp. 1799–1804.
   Google Scholar
• Lynch, A. F., Bortoff, S. A., & Röbenack, K. (2004). Nonlinear tension observers for web machines. Automatica, 40(9), 1517–1524. https://doi.org/10.1016/j.automatica.2004.03.021
   Web of Science ®Google Scholar
• Ma, P., Qin, J., Salsbury, J., & Xu, T. (2011). Demand reduction in building energy systems based on economic model predictive control. Chemical Engineering Sciences, 67(1), 92–100. https://doi.org/10.1016/j.ces.2011.07.052
   Web of Science ®Google Scholar
• Madoński, R., & Herman, P. (2015). Survey on methods of increasing the efficiency of extended state disturbance observers. ISA Transactions, 56, 18–27. https://doi.org/10.1016/j.isatra.2014.11.008
   PubMed Web of Science ®Google Scholar
• Mahto, P. K., & Murmu, R. (2015). Temperature control for plastic extrusion process. International Journal of Innovative Research in Science, Engineering and Technology, 4(7), 5748–5758.
   Google Scholar
• Manh, C. N., Van, M. T., Duc, D. N., Tung, L. N., Tien, D. P., & Thi, L. T. (2019). Neural network based adaptive control of web transport systems. In Proceedings of the International Conference on System Science and Engineering (ICSSE), pp. 124–128.
   Google Scholar
• Maxime, L., Chanel, P. C., & François, C. (2015). “Backstepping control law application to path tracking with an indoor quadrotor,” In Proceedings of European Aerospace Guidance Navigation and Control Conference.
   Google Scholar
• Mayr, A., Kißkalt, D., Lomakin, A., Graichen, K., & Franke, J. (2021). Towards an intelligent linear winding process through sensor integration and machin learning techniques. Procedia CIRP, 96, 80–85. https://doi.org/10.1016/j.procir.2021.01.056
   Google Scholar
• Mirinejad, H., Welch, K. C., & Spicer, L. (2012). A review of intelligent control techniques in HVAC systems. In Proceedings of the 2012 IEEE Energytech Conference, pp. 1–5. https://doi.org/10.1109/EnergyTech.2012.6304679
   Google Scholar
• Mohd Ali, J., Ha Hoang, N., Hussain, M. A., & Dochain, D. (2015). Review and classification of recent observers applied in chemical process systems. Computers & Chemical Engineering, 76, 27–41. https://doi.org/10.1016/j.compchemeng.2015.01.019
   Web of Science ®Google Scholar
• Muthukumar, N., Srinivasan, S., Ramkumar, K., Kannan, K., & Balas, V. E. (2016). Adaptive model predictive controller for web transport systems. Acta Polytechnica Hungarica, 13(3), 181–194. https://doi.org/10.12700/APH.13.3.2016.3.10
   Web of Science ®Google Scholar
• Muthukumar, N., Srinivasan, S., Ramkumar, K., Kavitha, P., & Balas, V. E. (2015). Supervisory GPC and evolutionary PI controller for web transport systems. Acta Polytechnica Hungarica, 12(5), 135–153.
   Web of Science ®Google Scholar
• Nagarkatti, S. P., Zhang, F., Rahn, C. D., & Dawson, D. M. (2000). Tension and speed regulation for axially moving materials. Journal of Dynamic Systems, Measurement, and Control, 122(3), 445–453. https://doi.org/10.1115/1.1286270
   Web of Science ®Google Scholar
• Naidu, D. S., & Rieger, C. G. (2014). Advanced control strategies for heating, ventilation, air-conditioning, and refrigeration systems—An overview: Part I: Hard control. HVAC&R Research, 17(1), 2–21. https://doi.org/10.1080/10789669.2011.540942
   Google Scholar
• Nebos’ko, E. Y., Proskurnikov, A. V., & Yakubovich, V. A. (2010). Adaptive regulators for the control of an uncertain linear discrete time system with a reference model. Doklady Mathematics, 82(1), 667–670. https://doi.org/10.1134/S1064562410040423
   Web of Science ®Google Scholar
• Nishida, T., Sakamoto, T., & Giannoccaro, N. I. (2013). Self-tuning PI control using adaptive PSO of a web transport system with overlapping decentralized control. Electrical Engineering in Japan, 184(1), 56–65. https://doi.org/10.1002/eej.22366
   Web of Science ®Google Scholar
• Ofosu, R. A., Asiedu-Asante, A. B., & Adjei, R. B. (2020). Fuzzy logic based condition monitoring of a 3-phase induction motor. In IEEE AFRICON-2019, pp. 1–9.
   Google Scholar
• Ofosu, R. A., Kaberere, K. K., Nderu, J. N., & Kamau, S. I. (2019). Design of BFA-optimized fuzzy electronic load controller for micro hydro power plants. Energy for Sustainable Development, 51, 13–20. https://doi.org/10.1016/j.esd.2019.04.003
   Web of Science ®Google Scholar
• Ofosu, R. A., Kamau, S. I., Nderu, J. N., Kaberere, K. K., & Muhia, A. M. (2016). Determination of optimal pi gains for fuzzy-pi controller using bacterial foraging algorithm. IOSR Journal of Electrical and Electronics Engineering, 11(2), 26–33.
   Google Scholar
• Ofosu, R. A., Normanyo, E., & Obeng, L. (2020). Temperature control of heaters in cable extrusion machine using PSO-ANFIS controller. In IEEE AFRICON, pp. 1–9.
   Google Scholar
• Ofosu, R. A., Normanyo, E., Abdul-Aziz, N., & Stickings, S. S. (2023). Speed control of an electrical cable extrusion process using artificial intelligence-based technique. Jurnal Nasional Teknik Elektro, 12(1), 42–52.
   Google Scholar
• Ofosu, R. A., Normanyo, E., Kaberere, K. K., Kamau, S. I., & Otu, E. K. (2022). Design of an electronic load controller for micro hydro power plant using fuzzy-pi controller. Cogent Engineering, 9(2), 1–20.
   Google Scholar
• Padmavathi, K., & Sri, R. K. (2015). Hybrid bacterial foraging and particle swarm optimization for detecting bundle branch block. SpringerPlus, 4(4), 481. https://doi.org/10.1186/s40064-015-1240-z
   PubMedGoogle Scholar
• Pan, J., Wang, X., Chen, W., Xu, S., Shen, H., Ren, K., & Zhang, M. (2011). Electronic tension control of high-speed and active sending line based on fuzzy PID control. Advanced Materials Research, 338, 677–684. https://doi.org/10.4028/www.scientific.net/AMR.338.677
   Google Scholar
• Park, J., & Lee, C. (2018). Effect of radial stress on the adhesive force of a wound roll in industrial roll-to-roll manufacturing system. International Journal of Precision Engineering and Manufacturing, 19(3), 411–415. https://doi.org/10.1007/s12541-018-0049-4
   Web of Science ®Google Scholar
• Park, K., Kim, H., & Hwang, J. H. (2001). Design of an adaptive tension velocity controller for winding processes. In International Symposium on Industrial Electronics, pp. 67–72.
   Google Scholar
• Patelski, R., & Dutkiewicz, P. (2020). On the stability of ADRC for manipulators with modelling uncertainties. ISA Transactions, 102, 295–303. https://doi.org/10.1016/j.isatra.2020.02.027
   PubMed Web of Science ®Google Scholar
• Perduková, D., Fedor, P., Fedák, V., & Padmanaban, S. (2019). Lyapunov based reference model of tension control in a continuous strip processing line with multi-motor drive. Electronics, 8(1), 60. https://doi.org/10.3390/electronics8010060
   Web of Science ®Google Scholar
• Perera, D. W. U., Pfeiffer, C. F., & Skeie, N. O. (2014). Control of temperature and energy consumption in buildings- A review. International Journal of Energy and Environment, 5(4), 471–484.
   Google Scholar
• Pourseif, T., & Mohajeri, M. (2020). Design of robust control for a motor in electric vehicles. IET Electrical Systems in Transportation, 10(1), 68–74. https://doi.org/10.1049/iet-est.2018.5084
   Web of Science ®Google Scholar
• Prabhakar, R. P., Siraskar, B. N., & Ramamurthy, V. D. (2007). Decentralized control of web processing lines. IEEE Transactions on Control Systems Technology, 15(1), 106–117. https://doi.org/10.1109/TCST.2006.883345
   Web of Science ®Google Scholar
• Prívara, S., Široký, J., Ferkl, L., & Cigler, J. (2011). Model predictive control of a building heating system. Energy and Buildings, 43(2–3), 564–572. https://doi.org/10.1016/j.enbuild.2010.10.022
   Web of Science ®Google Scholar
• Raul, P. R., & Pagilla, P. R. (2011). Modelling and frequency response of web tension with a pendulum dancer and comparison of load cell and dancer-based tension control systems. In Proceedings of the International Conference on Web Handling, pp. 85–104.
   Google Scholar
• Raul, P. R., & Pagilla, P. R. (2015). Design and implementation of adaptive PI control schemes for web tension control in roll-to-roll manufacturing. ISA Transactions, 56, 1–12.
   Web of Science ®Google Scholar
• Raul, P. R., Manyam, S. G., Pagilla, P. R., & Darbha, S. (2015). Output regulation of nonlinear systems with application to roll-to-roll manufacturing systems. IEEE/ASME Transactions on Mechatronics, 20(3), 7.
   Web of Science ®Google Scholar
• Razmi, H., & Afshinfar, S. (2019). Neural network-based adaptive sliding mode control design for position and attitude control of a quadrotor UAV. Aerospace Science and Technology, 91, 12–27. https://doi.org/10.1016/j.ast.2019.04.055
   Web of Science ®Google Scholar
• Rehrl, M., & Horn, J. (2011). Temperature control for HVAC systems based on exact linearization and model predictive control. In Proceedings of the IEEE International Conference on Control Applications, pp. 1119–1124.
   Google Scholar
• Ross, T. J. (2010). Fuzzy Logic with Engineering Applications (3rd ed.). John Wiley & Sons Ltd. Publications.
   Google Scholar
• Rubio, J. D. J. (2016). Hybrid controller with observer for the estimation and rejection of disturbances. ISA Transactions, 65, 445–455. https://doi.org/10.1016/j.isatra.2016.08.026
   PubMed Web of Science ®Google Scholar
• Rui, Y., & Lingfeng, W. (2012). Optimal control strategy for HVAC system in building energy management. In PES T&D 2012.
   Google Scholar
• Saeed, A. S., Younes, A. B., Islam, S., Dias, J., Seneviratne, L., & Cai, G. (2015). A review on the platform design, dynamic modeling and control of hybrid UAVs. In International Conference on Unmanned Aircraft Systems (ICUAS).
   Google Scholar
• Safonov, M., Laub, A., & Hartmann, G. (1981). Feedback properties of multivariable systems: the role and use of the return difference matrix. IEEE Transactions on Automatic Control, 26(1), 47–65. https://doi.org/10.1109/TAC.1981.1102566
   Web of Science ®Google Scholar
• Şahin, M., & Erol, R. (2017). A comparative study of neural networks and ANFIS for forecasting attendance rate of soccer games. Mathematical and Computational Applications, 22(4), 43. https://doi.org/10.3390/mca22040043
   Web of Science ®Google Scholar
• Sakamoto, T., & Fujino, Y. (1995). Modelling and analysis of a web tension control system. In Proceedings of IEEE International Symposium on Industrial Electronics. https://doi.org/10.1109/ISIE.1995.497022
   Google Scholar
• Sakamoto, T., & Izunihara, Y. (1997). Decentralized control strategies for web tension control system. In Proceedings of the IEEE International Symposium on Industrial Electronics, pp. 1086–1089.
   Google Scholar
• Sanz, R., Garcia, P., Albertos, P., & Zhong, Q. C. (2017). Robust controller design for input-delayed systems using predictive feedback and an uncertainty estimator. International Journal of Robust and Nonlinear Control, 27(10), 1826–1840. https://doi.org/10.1002/rnc.3639
   Web of Science ®Google Scholar
• Shanhui, L., Xuesong, M., Fanfeng, K., & Kui, H. (2013). A decoupling control, algorithm for unwinding tension system based on active disturbance rejection control. Mathematical Problems in Engineering, 2013, 1–18.
   Web of Science ®Google Scholar
• Shankam, N., & Vivek, P. (2005). Novel method for dynamic yarn tension measurement and control in direct cabling process. Graduate Faculty of North Carolina State University.
   Google Scholar
• Shin, K. H. (1991). Distributed control of tension in multi-span web transport systems. Oklahoma State University.
   Google Scholar
• Shukla, M. K., Sharma, B. B., & Azar, A. T. (2018). Control and synchronization of a fractional order hyperchaotic system via backstepping and active backstepping approach. In Advances in nonlinear dynamics and chaos: Theory and application, pp. 559–595.
   Google Scholar
• Sicar, F. M. P., & Hazzab, A. (2011). Decentralized nonlinear control strategies for disturbance rejection in winding systems. In Proceedings of the IEEE International Electric Machines and Drives Conference, pp. 230–235.
   Google Scholar
• Siddique, N., & Tokhi, M. O. (2006). GA-based neural fuzzy control of flexiblelink manipulators. Engineering Letters, 13, 1–10.
   Google Scholar
• Široký, J., Oldewurtel, F., Cigler, J., & Prívara, S. (2011). Experimental analysis of model predictive control for an energy efficient building heating system. Applied Energy. 88(9), 3079–3087. https://doi.org/10.1016/j.apenergy.2011.03.009
   Web of Science ®Google Scholar
• Song, Y. (2014). Intelligent PID controller based on fuzzy logic control and neural network technology for indoor environment quality improvement [PhD diss., University of Nottingham].
   Google Scholar
• Sudhakar, P. R., & Shweta, V. (2019). Design and analysis of process parameters on multistage wire drawing process- a review. International Journal of Mechanical and Production Engineering Research and Development, 9(1), 403–412.
   Google Scholar
• Tan, S., Wang, L., & Liu, J. (2014). Research on decoupling method of thickness and tension control in rolling process. In Proceedings of the 11th IEEE World Congress on Intelligent Control and Automation, pp. 4715–4717.
   Google Scholar
• Tan, W., & Fu, C. (2015). Analysis of active disturbance rejection control for processes with time delay. In Proceedings of the American Control Conference (ACC), pp. 3962–3967.
   Google Scholar
• Tasevski, G., & Petreski, Z. (2016). A study on the tuner roll impact on the wire drawing process. The International Journal of Industrial Engineering and Technology, 6(2), 17–22.
   Google Scholar
• Tasevski, G., Petreski, Z., & Šiškovski, D. (2014). Simulation of an actuator and drive of a wire drawing machine’s mechatronic system using MATLAB/Simulink. Journal of Mechanical Engineering Science, 32(1), 1–7.
   Google Scholar
• Thue, W. A. (2012). Electrical power cable engineering (1st ed.). CRC Press.
   Google Scholar
• Tran, T. T., & Kyung-Hyun, C. (2014). A backstepping-based control algorithm for multi-span roll-to-roll web system. The International Journal of Advanced Manufacturing Technology, 70(1–4), 45–61. https://doi.org/10.1007/s00170-013-5168-6
   Web of Science ®Google Scholar
• Tran, T. T., Kyung-Hyun, C., Dong-Eui, C., & Dong-Soo, K. (2011). Web tension and velocity control of two-span roll-to-roll system for printed electronics. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 5(4), 329–346. https://doi.org/10.1299/jamdsm.5.329
   Web of Science ®Google Scholar
• Valenzuela, D., Carrasco, M. A., & Sbarbaro, R. (2006). Robust sheet tension tension estimation for paper winders. IEEE Transactions on Industry Applications, 16(6), 736–750.
   Google Scholar
• Valenzuela, M. A., Bentley, J. M., & Lorenz, R. D. (2012). Estimating of sheet modulus of elasticity using drive field signals. IEEE Transactions on Industry Applications, 48(5), 58–72.
   Web of Science ®Google Scholar
• Valenzuela, M., Bentley, J. M., & Lorenz, R. D. (2002). Sensorless tension control in paper machines. In Conference Record of Annual Pulp and Paper Industry Technical Conference IEEE (Vol. 44, pp. 17–21).
   Google Scholar
• Vasičkaninová, A., & Bakošová, M. (2016). Robust controller design for a heat exchanger using H2, H∞, H2/H∞, and n-synthesis approaches. Acta Chimica Slovaca, 9(2).
   Google Scholar
• Vedrines, M., & Knitte, D. (2007). Design optimization using genetic algorithms of web handling systems: the case of the pendulum dancer mechanism [Paper presentation]. In Proceedings of ASME International Mechanical Engineering Congress and Exposition, pp. 1–8. https://doi.org/10.1115/IMECE2007-42068
   Google Scholar
• Wang, B., Zuo, J., Wang, M., & Hao, H. (2008). Model reference adaptive tension control of web packaging material. In International Conference on Intelligent Computation Technology and Automation, pp. 395–398.
   Google Scholar
• Wolfermann, W. (1995). Tension control of webs. A review of the problems and solutions in the present and future. In International Conference on Web Handling, pp. 198–229.
   Google Scholar
• Wright, R. N. (2010). Wire technology: process engineering and metallurgy. Butterworth-Heinemann.
   Google Scholar
• Xiao-Ming, X., Wu Xiang, Z., Lun, D. X., Zhang, M., & Shi Hou, W. (2018). Design and analysis of a novel tension control method for winding machine. The Chinese Journal of Mechanical Engineering, 3(101), 16.
   Google Scholar
• Xie, G., Wang, J., Chen, W., & Xu, D. (2017). Tension control in unwinding system based on nonlinear dynamic matrix control algorithm. In 12th IEEE Conference on Industrial Electronics and Applications, pp. 1230–1235.
   Google Scholar
• Xie, Y.-C., Huang, H., Hu, Y., & Zhang, G.-Q. (2016). Applications of advanced control methods in spacecrafts: progress, challenges, and future prospects. Frontiers of Information Technology & Electronic Engineering, 17(9), 841–861. https://doi.org/10.1631/FITEE.1601063
   Web of Science ®Google Scholar
• Xiong, H., Liao, Y., & Chu, X. (2018). Improved model free adaptive control for winding system. In 7th Data Driven Control and Learning Systems Conference, pp. 396–401.
   Google Scholar
• Xiong, T., Cai, W., Xiong, Y., & Zhang, R. (2012). Dynamic matrix control of the lateral position of a moving web. In International Conference on Mechatronics and Automation (ICMA), pp. 1091–1096.
   Google Scholar
• Yan, M. T. (2004). Modelling and adaptive control of the wire transport system in wire electrical discharge machining. Journal of Systems and Control Engineering, 218(1), 638–643.
   Google Scholar
• Yang, M. (2012). Analysis and simulation of winding tension control system in shaftless web press. In Proceedings of the 31st Chinese Control Conference, pp. 1826–1830.
   Google Scholar
• Yang, M., & Zhang, S. (2014). Research of tension control system in web press based on the fuzzy adaptive PID controller. In IEEE 9th Conference on Industrial Electronics and Applications, pp. 1204–1208.
   Google Scholar
• Yanjun, X., Zhang, Z., Liu, Z., Liu, W., Gao, N., Zhou, W., & Mao, Z. (2022). Optimal analysis and application of the warp tension control system for a rapier loom. Textile Research Journal, 92(7–8), 1213–1225.
   Google Scholar
• Yuan-Yu, L. (2013). Nylon tension PID control during raw tire assembly.
   Google Scholar
• Yuet, F. P. (2002). Periodic tension disturbance attenuation in web process lines using active dancers. Oklahoma State University.
   Google Scholar
• Zhang, Q., Wang, S., Zhang, A., Zhou, J., & Liu, Q. (2017). Improved PI neural network-based tension control for stranded wire helical springs manufacturing. Control Engineering Practice, 67, 31–42. https://doi.org/10.1016/j.conengprac.2017.06.010
   Web of Science ®Google Scholar
• Zhang, Y. (1982). Applying electromagnetic cluthes and brakes. Instruments & control system. Chinese Construction Industry Publishing House.
   Google Scholar
• Zhao, P., Shi, Y., & Huang, J. (2017). Dynamics modeling and deviation control of the composites winding system. Mechatronics, 48, 12–29. https://doi.org/10.1016/j.mechatronics.2017.10.004
   Web of Science ®Google Scholar
• Zhao, W., & Ren, X. (2017). Adaptive robust control for four-motor driving servo system with uncertain nonlinearities. Control Theory and Technology, 15(1), 45–57. https://doi.org/10.1007/s11768-017-5120-7
   Google Scholar
• Zhen-Cai, Z., Xiang, L., Gang, S., & Wei-Dong, Z. (2017). Wire rope tension control of hoisting systems using a robust nonlinear adaptive backstepping control scheme. ISA Transactions, 72, 256–272. https://doi.org/10.1016/j.isatra.2017.11.007
   PubMed Web of Science ®Google Scholar
• Zheng, G. (2018). Control of high precision roll-to-roll manufacturing systems. University of Texas.
   Google Scholar
• Zhewei, G., Sheng, Z., Kaijie, Z., & Chenliang, S. (2020). Fully-digital tension control system with PID algorithm for winding ultra-fine enameled wires. In IOP Conference Series: Materials Science and Engineering, p. 11.
   Google Scholar
• Zhewei, G., Sheng, Z., Kaijie, Z., & Chenliang, S. (2020). Fully-digital tension control system with PID algorithm for winding ultrafine enameled wires. In IOP Conference Series: Materials Science and Engineering, pp. 1–11.
   Google Scholar
• Zhi, C., Guojun, Z., & Hongzhi, Y. (2018). A high-precision constant wire tension control system for improving workpiece surface quality and geometric accuracy in WEDM. Precision Engineering, 54, 51–59.
   Web of Science ®Google Scholar
• Zhiqiang, W., Haibao, N., Tingna, S., Qiang, G., & Changliang, X. (2018). Adaptive PI parameters for two-motor winding system. Mathematical Problems in Engineering, 2018, 14.
   Web of Science ®Google Scholar
• Zhu, R. (2010). Precise tension control of fibre winding and placement machine using closed-loop tension control system. Textile Research Journal, 6(3), 47–42.
   Google Scholar
• Zinelabidine, D. M., & Madjid, K. (2018). Decentralized controller robustness improvement using longitudinal overlapping decomposition, application to web winding system. Electronics & Electrical Engineering, 24(5), 10–18.
   Google Scholar
• Zubair, M., Ponniah, G., Yang, Y. J., & Choi, K. H. (2014). Web tension regulation of multispan roll-to-roll system using integrated active dancer and load cells for printed electronics applications. Chinese Journal of Mechanical Engineering, 27(2).
   Web of Science ®Google Scholar
• Zulu, A., & John, S. (2014). Review of control algorithms for autonomous quadrotors. Open Journal of Applied Sciences, 4(14), 547–556. https://doi.org/10.4236/ojapps.2014.414053
   Google Scholar