Development of microcontroller-based draft measuring system using Xbee technology

References

• Alimardani, R., Fazel, Z., Akram, A., Mahmoudi, A., & Varnamkhasti, M. G. (2008). Design and Development of a three-point hitch dynamometer. Journal of Agricultural Technology, 4(1), 37–52. 10.5555/20103035070
   Google Scholar
• Arvidsson, J., Keller, T., & Gustafsson, K. (2004). Specific draught for mouldboard plough, chisel plough and disc harrow at different water contents. Soil and Tillage Research, 79(2), 221–231. https://doi.org/10.1016/j.still.2004.07.010
   Web of Science ®Google Scholar
• Baker, G. L., Smith, A., & Clowick, R. (1981). Three point hitch dynamometer for directional force measurements. ASAE Paper No. 81-1044, p 198, SAE, Warrendale, PA.
   Google Scholar
• Boonsawat, V., Ekchamanonta, J., Bumrungkhet, K., & Kittipiyakul, S. (2010). XBee wireless sensor networks for temperature monitoring. The second conference on application research and development (ECTI-CARD 2010) (pp. 221–226).
   Google Scholar
• Chaplin, J., Lueders, M., & Zhao, Y. (1987). Three-point hitch dynamometer design and calibration. Applied Engineering in Agriculture, 3(1), 10–13.https://elibrary.asabe.org/abstract.asp?aid=26634
   Google Scholar
• Chouriya, A., Kushwah, A., Tewari, V. K., Gupta, C., Shrivastava, P., & Mahore, V. (2023). Development of PTO torque transducer based on an embedded digital wireless system for the 2WD tractor. Cogent Engineering, 10(2), 2272342. https://doi.org/10.1080/23311916.2023.2272342
   Web of Science ®Google Scholar
• Clark, R. L., & Adsit, A. H. (1985). Microcomputer based instrumentation system to measure tractor field performance. Transactions of the ASAE, 28(2), 393–0396.
   Google Scholar
• Cortez, P., & Morais, A. D. J. R. (2007). A data mining approach to predict forest fires using meteorological data. In Proceedings of the 13th Portuguese Conference on Artificial Intelligence (EPIA 2007), 2007, pp. 512–523.
   Google Scholar
• Desnanjaya, I. G. M. N., Hartawan, I. N. B., Parwita, W. G. S., & Iswara, I. B. A. I. (2020). Performance analysis of data transmission on a wireless sensor network using the XBee pro series 2B RF module. IJEIS (Indonesian Journal of Electronics and Instrumentation Systems), 10(2), 211. https://doi.org/10.22146/ijeis.59899
   Google Scholar
• Fitriyah, H., & Budi, A. S. (2019). Outlier detection in object counting based on hue and distance transform using median absolute deviation (MAD) [Paper presentation]. 2019 International Conference on Sustainable Information Engineering and Technology (SIET), (pp. 217–222). https://doi.org/10.1109/SIET48054.2019.8985993
   Google Scholar
• Gill, W. R., & Berg, G. E. V. (1967). Soil dynamics in tillage and traction (No. 316). Agricultural Research Service US Department of Agriculture.
   Google Scholar
• Godwin, R. J., O’dogherty, M. J., Saunders, C., & Balafoutis, A. T. (2007). A force prediction model for mouldboard ploughs incorporating the effects of soil characteristic properties, plough geometric factors and ploughing speed. Biosystems Engineering, 97(1), 117–129. https://doi.org/10.1016/j.biosystemseng.2007.02.001
   Web of Science ®Google Scholar
• Godwin, R. J., Reynolds, A. J., O’dogherty, M. J., & Al-Ghazal, A. A. (1993). A triaxial dynamometer for force and moment measurements on tillage implements. Journal of Agricultural Engineering Research, 55(3), 189–205. https://doi.org/10.1006/jaer.1993.1043
   Web of Science ®Google Scholar
• Grisso, R. D., Yasin, M., & Kocher, M. F. (1996). Tillage implement forces operating in silty clay loam. Transactions of the ASAE, 39(6), 1977–1982. 10.5555/19972401946
   Google Scholar
• Gupta, C., Tewari, V. K., Kumar, A. A., & Shrivastava, P. (2019). Automatic tractor slip-draft embedded control system. Computers and Electronics in Agriculture, 165, 104947. https://doi.org/10.1016/j.compag.2019.104947
   Web of Science ®Google Scholar
• Habibnia, A., Rahimipour, G., & Ranjbar, H. (2019). Comparison of Exploratory Data Analysis (EDA) and Median Absolute Deviation (MAD) in order to identify geochemical anomaly and mineralization potential areas (Case Study: Hanza district, southern of Urrmia–Dokhtar metallogenic belt). Journal of Analytical and Numerical Methods in Mining Engineering, 9(18), 89–101.https://anm.yazd.ac.ir/article_1362_en.html
   Google Scholar
• Hensh, S., Tewari, V. K., & Upadhyay, G. (2021). A novel wireless instrumentation system for measurement of PTO (power take-off) torque requirement during rotary tillage. Biosystems Engineering, 212, 241–251. https://doi.org/10.1016/j.biosystemseng.2021.10.015
   Web of Science ®Google Scholar
• Kabir, A. S., Shorif, M. A., Li, H., & Yu, Q. (2014 A study of secured wireless sensor networks with XBee and Arduino [Paper presentation]. The 2014 2nd International Conference on Systems and Informatics (ICSAI 2014), (pp. 492–496).
   Google Scholar
• Kathirvel, K., Balasubramanian, M., & Manian, R. (2000). Development and evaluation of loading car for assessment of drawbar performance of power tiller. Agricultural Mechanization in Asia, Africa and Latin America (Japan), 31(3), 9–14.
   Google Scholar
• Khair, U., Fahmi, H., Al Hakim, S., & Rahim, R. (2017). Forecasting error calculation with mean absolute deviation and mean absolute percentage error. Journal of Physics: Conference Series, 930(1), 012002. https://doi.org/10.1088/1742-6596/930/1/012002
   Google Scholar
• Kheiralla, A. F., Yahya, A., Zohadie, M., & Ishak, W. (2004). Modelling of power and energy requirements for tillage implements operating in Serdang sandy clay loam, Malaysia. Soil and Tillage Research, 78(1), 21–34. https://doi.org/10.1016/j.still.2003.12.011
   Web of Science ®Google Scholar
• Kirisci, V., Blackmore, B. S., Godwin, R. J., & Blake, J. (1994). Design and calibration of three different three-point linkage dynamometers.
   Google Scholar
• Kocher, M. F., & Summers, J. D. (1987). Design of drawbar transducers for measuring dynamic forces. Transactions of the ASAE, 30(1), 70–0074.
   Google Scholar
• Kumar, A. A., Tewari, V. K., & Nare, B. (2016). Embedded digital draft force and wheel slip indicator for tillage research. Computers and Electronics in Agriculture, 127, 38–49. https://doi.org/10.1016/j.compag.2016.05.010
   Web of Science ®Google Scholar
• Kushwah, A., Chouriya, A., Tewari, V. K., Gupta, C., Chowdhury, M., Shrivastava, M., & Bhagat, P. (2024). A novel embedded system for tractor implement performance mapping. Cogent Engineering, 11(1), 2311093. https://doi.org/10.1080/23311916.2024.2311093
   Web of Science ®Google Scholar
• Kydd, H. D., Frehlich, G. E., & Boyden, A. R. (1985). Tillage power requirements in Western Canada. ASAE Paper No. 84-1027. ASAE, St. Joseph, MI, USA.
   Google Scholar
• Lee, Y. C., Lin, G., & Wang, M. J. J. (2014). Comparing 3D foot scanning with conventional measurement methods. Journal of Foot and Ankle Research, 7(1), 44. https://doi.org/10.1186/s13047-014-0044-7
   PubMedGoogle Scholar
• Leonard, J. J. (1980). An extended-octagon rigid drawbar dynamometer. Agricultural Engineering Australia, 9(1), 3–8.
   Google Scholar
• Mahore, V., Soni, P., Paul, A., Patidar, P., & Machavaram, R. (2024). Machine learning-based draft prediction for mouldboard ploughing in sandy clay loam soil. Journal of Terramechanics, 111, 31–40. https://doi.org/10.1016/j.jterra.2023.09.002
   Web of Science ®Google Scholar
• Mehta, C. R., Singh, K., & Selvan, M. M. (2011). A decision support system for selection of tractor–implement system used on Indian farms. Journal of Terramechanics, 48(1), 65–73. https://doi.org/10.1016/j.jterra.2010.05.002
   Web of Science ®Google Scholar
• Naderloo, L., Alimadani, R., Akram, A., Javadikia, P., & Khanghah, H. Z. (2009). Tillage depth and forward speed effects on draft of three primary tillage implements in clay loam soil. Journal of Food, Agriculture and Environment. 7(3), 382–385.
   Google Scholar
• Nataraj, E., Sarkar, P., Raheman, H., & Upadhyay, G. (2021). Embedded digital display and warning system of velocity ratio and wheel slip for tractor operated active tillage implements. Journal of Terramechanics, 97, 35–43. https://doi.org/10.1016/j.jterra.2021.06.003
   Web of Science ®Google Scholar
• Owolabi, O., Okoh, D., Rabiu, B., Obafaye, A., & Dauda, K. (2021). A median absolute deviation-neural network (MAD-NN) method for atmospheric temperature data cleaning. MethodsX, 8, 101533. https://doi.org/10.1016/j.mex.2021.101533
   PubMed Web of Science ®Google Scholar
• Patel, T., Chakravorty, A., & Karmakar, S. (2012) Software for performance prediction and matching of tractor-implement system [Paper presentation]. 2012 3rd National Conference on Emerging Trends and Applications in Computer Science, (pp. 262–269).
   Google Scholar
• Reece, A. R. (1961). A three point linkage dynamometer. Journal of Agricultural Engineering Research, 6(1), 45.
   Google Scholar
• Reid, J. T., Carter, L. M., & Clark, R. L. (1985). Draft measurements with a three-point hitch dynamometer. Transactions of the ASAE, 28(1), 89–0093.
   Google Scholar
• Robinette, K. M., & Daanen, H. A. (2006). Precision of the CAESAR scan-extracted measurements. Applied Ergonomics, 37(3), 259–265. https://doi.org/10.1016/j.apergo.2005.07.009
   PubMed Web of Science ®Google Scholar
• Roeber, J. B., Pitla, S. K., Hoy, R. M., Luck, J. D., & Kocher, M. F. (2017). Development and validation of a tractor drawbar force measurement and data acquisition system (DAQ). Applied Engineering in Agriculture, 33(6), 781–789. https://doi.org/10.13031/aea.12489
   Web of Science ®Google Scholar
• Sahu, R. K., & Raheman, H. (2008). A decision support system on matching and field performance prediction of tractor-implement system. Computers and Electronics in Agriculture, 60(1), 76–86. https://doi.org/10.1016/j.compag.2007.07.001
   Web of Science ®Google Scholar
• Salahloo, M., Mohammadi Alasti, B., Mardani, A., & Abbasgholipour, M. (2021). Effect of forward speed, working depth and overlay parameters of cultivator tillage on power consumption and draft force. Iranian Journal of Biosystems Engineering, 51(4), 749–756.
   Google Scholar
• Shrivastava, P., Tewari, V. K., Gupta, C., & Chouriya, A. (2023). HMI‐assisted visual interface‐cum‐embedded system for measurement of tractor–implement performance parameters. Journal of Field Robotics, 1–22.
   Web of Science ®Google Scholar
• Sprawka, M., Szymanek, M., Hammed Kassar, F., & Tanaś, W. (2023). The effect of plow modification on drawbar power requirement during ploughing and subsoil penetration resistance. Mechanization in Agriculture & Conserving of the Resources, 67(2), 51–55.
   Google Scholar
• Taniguchi, T., Makanga, J. T., Ohtomo, K., & Kishimoto, T. (1999). Draft and soil manipulation by amoldboard plow under different forward speed and body attachments. Transactions of the ASAE, 42(6), 1517–1522.
   Google Scholar
• Tessier, S., Guilbert, A., McLaughlin, N. B., & Tremblay, D. (1992). A double EOR drawbar pull transducer for 3-d force measurement. CSAE Paper (pp. 92–406). CSAE, Winnipeg, MB, Canada.
   Google Scholar
• Upadhyay, G., Raheman, H., & Dubey, R. (2022). Novel draught resistance sensing elements for measurement of drawbar power of agricultural machinery. Spanish Journal of Agricultural Research, 20(4), e0208. https://doi.org/10.5424/sjar/2022204-19171
   Web of Science ®Google Scholar
• Usaborisut, P., & Prasertkan, K. (2018). Performance of combined tillage tool operating under four different linkage configurations. Soil and Tillage Research, 183, 109–114. https://doi.org/10.1016/j.still.2018.06.004
   Web of Science ®Google Scholar