Enhancement of tribological properties of carbide cutting tools by ceramic coating deposition

References

• Xu RG, Chen Z, Chen P, et al. Mechanical properties of advanced multifunctional coatings. Coatings. 2022;12(5):599. doi: 10.3390/coatings12050599
   Web of Science ®Google Scholar
• Wang H, Webb T, Bitler JW. Study of thermal expansion and thermal conductivity of cemented WC–Co composite. Int J Refract Met Hard Mater. 2015;49:170–177. doi: 10.1016/j.ijrmhm.2014.06.009
   Web of Science ®Google Scholar
• Suresh R, Basavarajappa S, Gaitonde VN, et al. Machinability investigations on hardened AISI 4340 steel using coated carbide insert. Int J Refract Met Hard Mater. 2012;33:75–86. doi: 10.1016/j.ijrmhm.2012.02.019
   Web of Science ®Google Scholar
• Asaad M W, Al-Ethari H, Kareem SJ. Surface modification of cutting tool by multilayer coatings a-review paper. In: AIP Conference Proceedings, Dohuk University, Iraq. AIP Publishing; 2022. p. 1–10.
   Google Scholar
• Bennett A. Properties of thermal barrier coatings. Mater Sci Technol. 1986;2(3):257–261. doi: 10.1179/mst.1986.2.3.257
   Web of Science ®Google Scholar
• Ronghua W, John JV, Jesse NM, et al. Aspects of plasma-enhanced magnetron-sputtered deposition of hard coatings on cutting tools. Surf Coat Technol. 2002;158–159:465–472.
   Web of Science ®Google Scholar
• Durmaz YM, Yildiz F. The wear performance of carbide tools coated with TiAlSiN, AlCrN and TiAlN ceramic films in intelligent machining process. Ceram Int. 2019;45(3):3839–3848. doi: 10.1016/j.ceramint.2018.11.055
   Web of Science ®Google Scholar
• Rezende BA, Santos AJd, Camara MA, et al. Characterization of ceramics coatings processed by sol-gel for cutting tools. Coatings. 2019;9:755. doi: 10.3390/coatings9110755
   Web of Science ®Google Scholar
• Asaad W, Al-Ethari H, Kareem S. Investigation of microstructure, morphology and properties of monolayer and multilayer coating T6-HSS by the sol–gel route. Adv Mater Process Technol. 2023;9(4):1594–1620. doi: 10.1080/2374068X.2022.2129518
   Google Scholar
• Asaad W, Al-Ethari H, Kareem SJ. Using grey relation analysis to improve tool life in medium carbon steel turning by coating multilayer HSS insert. In: 2022 13th International Conference on Mechanical and Aerospace Engineering (ICMAE), Bratislava. IEEE; 2022 July. p. 507–513.
   Google Scholar
• ASTM handbook, iron and metal products, 1989, Vol. 01.01.
   Google Scholar
• Gill SS, Singh J, Singh H, et al. Metallurgical and mechanical characteristics of cryogenically treated tungsten carbide (WC–Co). Int J Adv Manuf Technol. 2012;58:119–131. doi: 10.1007/s00170-011-3369-4
   Web of Science ®Google Scholar
• Hammood SA, Al-Ethari H, Al-Juboori HAH. Effect of cement kiln dust on properties of Al-base composite prepared by P/M. In: 2017 8th International Conference on Mechanical and Aerospace Engineering (ICMAE). IEEE; 2017 July. p. 204–208.
   Google Scholar
• Žalga A, Abakevičienė B, Žarkov A, et al. On the properties of yttria-stabilized zirconia thin films prepared by sol-gel method. Mater Sci. 2011;17(2):191–196.
   Web of Science ®Google Scholar
• Cano FJ, Castilleja-Escobedo O, Espinoza-Pérez LJ, et al. Effect of deposition conditions on phase content and mechanical properties of yttria-stabilized zirconia thin films deposited by Sol-Gel/Dip-coating. J Nanomater. 2021;2021.
   Google Scholar
• Chen AN, Lu L, Cheng LJ, et al. TEM analysis and mechanical strengthening mechanism of MnO2 sintering aid in selective laser sintered porous mullites. J Alloys Compd. 2019;809:151809. doi: 10.1016/j.jallcom.2019.151809
   Web of Science ®Google Scholar
• Chen AN, Gao F, Li M, et al. Mullite ceramic foams with controlled pore structures and low thermal conductivity prepared by SLS using core-shell structured polyamide12/FAHSs composites. Ceram Int. 2019;45(12):15538–15546. doi: 10.1016/j.ceramint.2019.05.059
   Web of Science ®Google Scholar
• Jadhav PM, Kumar Reddy NS. Wear behavior of carbide tool coated with yttria-stabilized zirconia nano particles. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing; 2018 April. Vol. 346, p. 012007.
   Google Scholar
• Cao XQ, Vassen R, Stöver D. Ceramic materials for thermal barrier coatings. J Eur Ceram Soc. 2004;24(1):1–10. doi: 10.1016/S0955-2219(03)00129-8
   Web of Science ®Google Scholar
• Zhang S, Liu Z. An analytical model for transient temperature distributions in coated carbide cutting tools. Int Commun Heat Mass Transfer. 2008;35(10):1311–1315. doi: 10.1016/j.icheatmasstransfer.2008.08.001
   Web of Science ®Google Scholar