Surface shot peening of cast SiC_w/Al composites

References

• Rajak DK, Pagar DD, Kumar R, et al. Recent progress of reinforcement materials: a comprehensive overview of composite materials. J Mater Res Technol. 2019;8(6):6354–6374. doi:10.1016/j.jmrt.2019.09.068
   Google Scholar
• Kim CS, Cho K, Manjili MH, et al. Mechanical performance of particulate-reinforced Al metal-matrix composites (MMCs) and Al metal-matrix nano-composites (MMNCs). J Mater Sci. 2017;52(23):13319–13349. doi:10.1007/s10853-017-1378-x
   Web of Science ®Google Scholar
• Singh L, Kumar S, Raj S, et al. Aluminium metal matrix composites: manufacturing and applications. IOP Conf Ser Mater Sci Eng. 2021;1149:012025.
   Google Scholar
• Orifici AC, Herszberg I, Thomson RS. Review of methodologies for composite material modelling incorporating failure. Compos Struct. 2008;86(1–3):194–210. doi:10.1016/j.compstruct.2008.03.007
   Web of Science ®Google Scholar
• Benedetti M, Fontanari V, Höhn BR, et al. Influence of shot peening on bending tooth fatigue limit of case hardened gears. Int J Fatigue. 2002;24(11):1127–1136. doi:10.1016/S0142-1123(02)00034-8
   Web of Science ®Google Scholar
• Unal O, Varol R. Surface severe plastic deformation of AISI 304 via conventional shot peening, severe shot peening and repeening. Appl Surf Sci. 2015;351:289–295. doi:10.1016/j.apsusc.2015.05.093
   Web of Science ®Google Scholar
• Zhang X, Liu D. Effects of electrospark surface strengthening and shot peening on fretting fatigue of Ti811 alloy at elevated temperature. J Mater Eng. 2006;9:31.
   Google Scholar
• Huang JJ, Wang Z, Bian K, et al. Investigation for different peening techniques on residual stress field of SiCw/Al composite. J Mater Eng Perform. 2013;22(3):782–786. doi:10.1007/s11665-012-0303-3
   Web of Science ®Google Scholar
• Liu HB, Zhu WL, Jiang CH, et al. Microstructure evolution and residual stress distribution of nanostructured Mg-8Gd-3Y alloy induced by severe shot peening. Surf Coat Technol. 2020;404:(126465), doi:10.1016/j.surfcoat.2020.126465
   Web of Science ®Google Scholar
• Chen M, Liu HB, Wang LB, et al. Investigation on the thermostability of residual stress and microstructure in shot peened SAF 2507 duplex stainless steel. Vacuum. 2018;153:145–153. doi:10.1016/j.vacuum.2018.04.015
   Web of Science ®Google Scholar
• Alhamdany AA, Khenyab AY, Sabah A. Influence of shot peening on the corrosion and fatigue behavior of Al 6061. AIP Conf Proc. 2022: 060001.
   Google Scholar
• González J, Bagherifard S, Guagliano M, et al. Influence of different shot peening treatments on surface state and fatigue behaviour of Al 6063 alloy. Eng Fract Mech. 2017;185:72–81. doi:10.1016/j.engfracmech.2017.03.017
   Web of Science ®Google Scholar
• Jiang CH, Zhan K, Yang CZ. Shot peening and X-ray diffraction characterization of materials. Science Press; 2019. p. 523–567.
   Google Scholar
• Wang CX, Jiang CH, Chai Z, et al. Estimation of microstructure and corrosion properties of peened nickel aluminum bronze. Surf Coat Technol. 2017;313:136–142. doi:10.1016/j.surfcoat.2017.01.073
   Web of Science ®Google Scholar
• Wang LB, Zhao YT, Jiang CH, et al. Investigation on microstructure and properties of electrodeposited Ni-Ti-CeO 2 composite coating. J Alloys Compd. 2018;754:93–104. doi:10.1016/j.jallcom.2018.04.288
   Web of Science ®Google Scholar
• Zhu KY, Li ZQ, Fan GL, et al. Thermal relaxation of residual stress in shot-peened CNT/Al-Mg-Si alloy composites. J Mater Res Technol. 2019;8(2):2201–2208. doi:10.1016/j.jmrt.2019.01.023
   Google Scholar
• Zhu KY, Jiang CH, Li ZQ, et al. Residual stress and microstructure of the CNT/6061 composite after shot peening. Mater Des. 2016;107:333–340. doi:10.1016/j.matdes.2016.06.030
   Web of Science ®Google Scholar
• Zhang Z-P, Qi Y-H, Denis D, et al. Microstructure variation and hardness diminution during low cycle fatigue of 55NiCrMoV7 steel. J Iron Steel Res Int. 2007;14(6):68–73. doi:10.1016/S1006-706X(07)60093-4
   Web of Science ®Google Scholar
• Xie ZW, Wang LP, Wang XF, et al. Influence of high temperature annealing on the structure, hardness and tribological properties of diamond-like carbon and TiAlSiCN nanocomposite coatings. Appl Surf Sci. 2011;258(3):1206–1211. doi:10.1016/j.apsusc.2011.09.072
   Web of Science ®Google Scholar
• Bagherifard S, Pariente IF, Ghelichi R, et al. Effect of shot peening on residual stresses and surface work-hardening in cold sprayed coatings. 8th international conference on fracture and damage mechanics, Malta; 2009. p. 397-+.
   Google Scholar
• Fathallah R, Sidhom H, Braham C, et al. Effect of surface properties on high cycle fatigue behaviour of shot peened ductile steel. Mater Sci Technol. 2003;19(8):1050–1056. doi:10.1179/026708303225003027
   Web of Science ®Google Scholar
• Luan WZ, Jiang CH, Ji V, et al. Effect of shot peening on surface mechanical properties of TiB2/Al composite. J Mater Sci. 2009;44(10):2454–2458. doi:10.1007/s10853-009-3310-5
   Web of Science ®Google Scholar
• Wang CX, Jiang CH, Zhao YT, et al. Surface mechanical property and residual stress of peened nickel-aluminum bronze determined by in-situ X-ray diffraction. Appl Surf Sci. 2017;420:28–33. doi:10.1016/j.apsusc.2017.05.108
   Web of Science ®Google Scholar